Instructions / Assembly

MISSING A PART?

1-800-990-6003

There is no need to

return this item to the

store. Instead call our

TOLL FREE HOTLINE.

INSTALLATION INSTRUCTIONS

HyLoft 36" x 18" Shelf

One Unit Shown

Box Contains TWO complete units

12 Lag Screws 5/16" X 2 ½"

4 Rubber Stoppers

2 wire grids

4 Shelf Brackets-2 left

and 2 right

• 7/16" (11 mm) Wrench • Stud Finder • Drill and 3/16"(5 mm) drill bit

•Socket Wrench and 7/16"(11 mm) Socket • Tape Measure • Pencil • Level

Parts Included:

Tools required for installing the 36" x 18" shelves:

MISSING A PART? There is no need to return this item to the store. Instead, call us Toll Free 1-800-990-6003

2 Large Clothes Rods

2 Thinner Clothes Rods

150

HyLoft Sticker

1-800-990-6003

4 Hex Bolts 1/4" x 1/2".

PAGE 1
INSTALLATION INSTRUCTIONS HyLoft 36" x 18" Shelf MISSING A PART? There is no need to return this item to the store. Instead call our TOLL FREE HOTLINE. 1-800-990-6003 One Unit Shown Box Contains TWO complete units Parts Included: 2 wire grids 2 Large Clothes Rods 4 Shelf Brackets-2 left and 2 right F 4 Rubber Stoppers 12 Lag Screws 5/16" X 2 ½" HyLoft Sticker 1-800-990-6003 150 2 Thinner Clothes Rods 4 Hex Bolts 1/4" x 1/2".
PAGE 2
INSTALL SHELF BRACKETS INTO WALL STUDS 1A Using Stud finder locate Studs approximately 32” apart 1B Mark hole locations with pencil and pre-drill with 3/16” drill bit IMPORTANT NOTE: Make sure hole locations are level before drilling holes. 1C Install 2 Lag Screws(C) using 7/16” nut driver or socket wrench.
PAGE 3
PLACE AND ATTACH GRIDS Note: 4 cluster wires need to be in the front and all long wires need to be on the top. 2A Place grid on top of brackets until fully inserted into slots F 2B Place slot in Rubber Stoppers(F) on brackets behind shelf. ATTACH CLOTHING RODS(OPTIONAL) Insert thin clothes rod (E) into larger clothes rod (D). Attach rod assembly with ½" screws (G) into ends of clothes rods (D & E) as shown. You have now completed the installation are ready to load your new HyLoft Shelf.