Certifications 2

ManualsBrandsHYLOMAR ManualsAdhesivesM Universal sealing Colour Blue 80 ml

SAFETY DATA SHEET

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Hylomar M/Aerograde Ultra PL32A- Light, Medium and Heavy Grades

Trade name or designation

of the mixture

Registration number

None.

Synonyms

SDS number

23-August-2018

Issue date

Version number

05-September-2018

Revision date

23-August-2018

Supersedes date

1.2. Relevant identified uses of the substance or mixture and uses advised against

Non-Setting and Non-Hardening Gasketing Compound.

Identified uses

None known.

Uses advised against

1.3. Details of the supplier of the safety data sheet

Hylomar Ltd.

Manufacturer:

Hylo House, Cale Lane, New Springs,

Address:

Wigan, Greater Manchester,

UK, WN2 1JT

+44(0)1942 617000

Telephone number:

info@hylomar.co.uk

E-mail address:

Technical Department

Contact person:

+1-760-476-3961 (US)

1.4. Emergency telephone

number

Access code: 333544

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

The mixture has been assessed and/or tested for its physical, health and environmental hazards and the following classification

applies.

Classification according to Regulation (EC) No 1272/2008 as amended

H225 - Highly flammable liquid and

vapour.

Category 2Flammable liquids

Physical hazards

H319 - Causes serious eye

irritation.

Category 2Serious eye damage/eye irritation

Health hazards

H336 - May cause drowsiness or

dizziness.

Category 3 narcotic effectsSpecific target organ toxicity - single

exposure

Hazard summary

Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness and

dizziness.

2.2. Label elements

Label according to Regulation (EC) No. 1272/2008 as amended

Contains:

Acetone

Hazard pictograms

Signal word

Danger

Hazard statements

H225

Highly flammable liquid and vapour.

H319

Causes serious eye irritation.

H336

May cause drowsiness or dizziness.

Hylomar M/Aerograde Ultra PL32A- Light, Medium and Heavy Grades SDS UK

903698 Version #: 02 Revision date: 05-September-2018 Issue date: 23-August-2018

1 / 9

Summary of content (9 pages)

PAGE 1
SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name or designation of the mixture Hylomar M/Aerograde Ultra PL32A- Light, Medium and Heavy Grades Registration number - Synonyms None. SDS number 4 Issue date 23-August-2018 Version number 02 Revision date 05-September-2018 Supersedes date 23-August-2018 1.2.
PAGE 2
Precautionary statements Prevention Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Avoid breathing mist or vapour. Wear protective gloves/protective clothing/eye protection/face protection. P210 P261 P280 Response In case of fire: Use foam, carbon dioxide, dry powder or water fog for extinction. P370 + P378 Storage Store in a well-ventilated place. Keep container tightly closed.
PAGE 3
5.2. Special hazards arising from the substance or mixture 5.3. Advice for firefighters Special protective equipment for firefighters Special fire fighting procedures By heating and fire, harmful vapours/gases may be formed. Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Selection of respiratory protection for firefighting: follow the general fire precautions indicated in the workplace.
PAGE 4
EU. Indicative Exposure Limit Values in Directives 91/322/EEC, 2000/39/EC, 2006/15/EC, 2009/161/EU Components Type Value Acetone (CAS 67-64-1) TWA 1210 mg/m3 500 ppm Ethylene glycol (CAS 107-21-1) STEL 104 mg/m3 40 ppm TWA 52 mg/m3 20 ppm Biological limit values No biological exposure limits noted for the ingredient(s). Recommended monitoring procedures Follow standard monitoring procedures.
PAGE 5
Initial boiling point and boiling range Not applicable. Flash point -17.0 °C (1.4 °F) Closed cup Evaporation rate Not available. Flammability (solid, gas) Not applicable. Upper/lower flammability or explosive limits 4 Flammability limit - lower (%) Flammability limit - upper (%) 57 Vapour pressure 185 mmHg (20 °C/68 °F) Vapour density 2 (Air = 1) (20 °C/68 °F) Relative density Heavy grade: 1.10 (20 °C/68 °F) Medium grade: 1.03 (20 °C/68 °F) Light grade: 0.
PAGE 6
Components Oral LD50 Species Test Results Rat 5800 mg/kg Rabbit 9530 mg/kg Ethylene glycol (CAS 107-21-1) Acute Dermal LD50 Skin corrosion/irritation Prolonged or repeated skin contact may cause drying, cracking, or irritation. Serious eye damage/eye irritation Causes serious eye irritation. Respiratory sensitisation Based on available data, the classification criteria are not met. Skin sensitisation Based on available data, the classification criteria are not met.
PAGE 7
SECTION 13: Disposal considerations 13.1. Waste treatment methods Residual waste Contaminated packaging EU waste code Disposal methods/information Special precautions Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner. Do not discharge into rivers, lakes, mountains, etc. because the product may affect the environment.
PAGE 8
Read safety instructions, SDS and emergency procedures before handling. 14.6. Special precautions for user IMDG UN1133 14.1. UN number ADHESIVES. 14.2. UN proper shipping name 14.3. Transport hazard class(es) 3 Class Subsidiary risk 3 Label(s) II 14.4. Packing group 14.5. Environmental hazards No. Marine pollutant F-E, S-D EmS Read safety instructions, SDS and emergency procedures before handling. 14.6. Special precautions for user Not applicable. 14.7.
PAGE 9
15.2. Chemical safety assessment No Chemical Safety Assessment has been carried out. SECTION 16: Other information List of abbreviations References DNEL: Derived No-Effect Level. PNEC: Predicted No-Effect Concentration. LD50: Lethal Dose, 50%. LC50: Lethal Concentration, 50%. NOEC: No observed effect concentration. ECHA CHEM Information on evaluation method leading to the classification of mixture The mixture is classified based on test data for physical hazards.