User's Manual

Chapter 1
1-26 ICE Series Troubleshooting Manual 940331-002, rev. A
Performing a Printer Test
Use this function to initiate a printer test. The terminal produces a test print with various characters and
font sizes.
N
OTE: You can also access this function by Merchant Functions, 8, 2, and pressing or touching Enter.
Step-by-Step
To perform a printer test:
Step Action Terminal response
1 Touch Press Here for Menu on the terminal display.
NOTE: The Idle prompt may vary depending on the
terminal and its configuration.
If the option you want is not on this screen,
touch + on the terminal display for additional
menu options.
0$,1 Ï;
1HZ7UDQV %DWFK
5HSRUWV 7HUPLQDO
&DVKLHU 7DE
6HWXS 7HVWV
2 Touch Tests on the terminal display. 7(676 Ï;
+RVW 'LVSOD\
.H\ERDUG 3,13DG
3ULQWHU &DUG5HDGHU
6PDUW&DUG
3 Touch Printer on the terminal display. The terminal produces
a test print. See Figure 1-1 on page 1-27.
If the terminal displays a Printer Error message, confirm that
the printer is enabled and the terminal is properly configured.
See "Changing Settings in the Terminal Boot Level" on page
1-19 and "Turning the Printer On or Off" on page 1-28
The terminal returns to the Idle prompt.