Firmware, Drivers & Software

ON/OFF
Charging port
Status light
70-00136 Rev 1
Standby
Low battery
Cold
Hot
Contrast
Scan to watch demo video
Hyperice X Offline Mode
Step 1
Press ON/OFF button to activate device. You should
see the green light pulse, signifying standby mode.
Step 2
Once device is turned on, hold ON/OFF button for
2 seconds to enter offline mode. You should see a
blue light (defaults to cold).
Step 3
Quickly press ON/OFF button to cycle through modes:
Cold - 15 min @ the max setting
Hot - 15 min @ the medium setting
Contrast - 20 min (alternates cold/hot for 5 mins each)
Once mode is selected, device will start automatically
after 2 seconds.
Low battery/error
Status light flashes yellow
Use the below instructions to operate
Hyperice X manually.