User Manual

The Hyperice X device uses Bluetooth 5.0 wireless technology with the
following radio specifications:
Frequency 2.4GHz ISM ( 2.36000 – 2.4835GHz)
Modulations GFSK at 1 Mbps, 2 Mbps data rates
Transmit Power 0 dBm
Sensitivity -96dBm Bluetooth, -89dBm at 2Mbs
Security 128-bit AES ECB/CCM/AAR co-processor
FCC ID: 2AWOM-1040001
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IC: 26209-1040001
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le onctionnement.
Internal Battery Information
This device is equipped with a rechargeable lithium ion battery. The internal
battery is designed to allow use of Hyperice X anywhere—even when power
outlets are not available. The Hyperice X device may need to be plugged in
before first use. The battery will provide power for approximately 90 minutes
of continuous use (of cold therapy). It takes approximately three hours to fully
charge the battery when the device is plugged in and not in use.
The rechargeable lithium ion battery is intended to be changed only by
authorized service personnel with the use of a special service tool.
Product Specifications
• Hyperice X dimensions: 12.5” x 10” x 1.5”
• Hyperice X weight: 2 lbs
• Hyperice X electrical requirement: 9V 6A
• Temperature (operating): +41° F to 104° F [+5° C to +40° C]
• Temperature (storage): -13° F to +158° F [-25° C to +70° C]
• Relative Humidity (operating): 15% to 90%, non-condensing
• Relative Humidity (storage): -25ºC without relative humidity control;
+70º C at relative humidity up to 93%, non-condensing
• Atmospheric pressure (storage and transportation): 190hPa to 1060hPa
• Atmospheric pressure (operating): 700hPa to 1060hPa
AC/DC Adapter
⚠WARNING! Only use either the AC-DC adapter model number
GTM96600-5409-T2provided with the device.
• Input: 100-240 VAC, 50-60Hz, 1.5A per GlobTek model number
GTM96600-5409-T2
• Output: 9V DC 6A, 54W Max per GlobTek model number GTM96600-
5409-T2
Or the AC-DC adapter model number GSM60B09 provided with the device.
• Input: 100-240 VAC, 50/60Hz, 1.4-0.7A per MeanWell model number
GSM60B09
• Output: 9V DC 6A, 54W Max per MeanWell model number GSM60B09
Using a different adapter may cause the device to not operate correctly.
Electromagnetic Compatibility
The information contained in this section (such as separation distances) is in
general specifically written regarding Hyperice X. The numbers provided will
not guarantee faultless operation but should provide reasonable assurance
of such. This information may not be applicable to other medical electrical
equipment; older equipment may be particularly susceptible to interference.