Other Content

3) If necessary, remove pre-existing memory by pressing down on the lock/ejector tabs. The tabs
are located at both ends of the memory socket.
4) Align the memory module key(s) along with the memory socket keys(s) for proper
installation.
5) Press the memory into the socket until the tabs snap into place and secure the memory
module.
6) Replace the computer cover and plug in the AC power cord.
Notebook SO-DIMM Installation
Note: Never apply pressure or handle the memory module on or around the Integrated Circuit
(IC)! Always handle the memory with both hands positioned at the upper-most corners of the
Printed Circuit Board (PCB).