User Manual HyperX Cloud Revolver S Headset Find the language and latest documentation for your HyperX Cloud Revolver S Headset here. HyperX Cloud Revolver S Headset Installation Guide . . . . . . . . . . . . For instructions in English . . . . . . . . . . . . . . . . . . Para instrucciones en Español . . . . . . . . . Für Anleitungen in Deutsch . . . . . . . . . . . . . . . . . . Pour des instructions en Français . . . . . . . . . . . . .
HyperX Cloud Revolver S Headset Part Numbers: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA Document No. 480HX-HSCRS001.
TABLE OF CONTENTS Introduction ..............................................................................................................................3 What’s included ........................................................................................................................3 Features ...................................................................................................................................4 Technical Specifications.................................................
Introduction HyperX™ Cloud Revolver S is primed for action with Plug N Play virtual Dolby® Surround 7.1 audio — no software required. Hear every footstep, explosion and gunshot with cinematic clarity as the simulated seven positional speakers provide precise sound with distance and depth. The advanced USB DSP sound card handles everything, delivering consistent premium-quality sound, no matter what system you’re playing on.
Features • Plug N Play Dolby® Surround 7.1 audio technology • Advanced USB Audio Control Box with DSP Sound Card • Studio grade sound stage • Signature HyperX memory foam • Wide Headband for Maximum Comfort Technical Specifications Headphone • Driver: Dynamic, 50mm with neodymium magnets • Type: Circumaural, Closed back • Frequency Response: 12Hz–28,000 Hz • Impedance: 30 Ω • Sound pressure level: 100.5dBSPL/mW at 1kHz • T.H.D.
Overview A. Durable Steel Frame B. Suspension headband C. Detachable noise cancellation mic D. Attached cable w/ 4 pole 3.5mm plug E. USB Audio control box F. PC extension cable Document No. 480HX-HSCRS001.
USB Audio Control Box operation The USB Audio Control Box has the following features: • • • • • Dolby® Surround 7.1 audio technology 3 preset equalizer modes Microphone Mute Headphone volume adjustment Microphone volume adjustment Vocals EQ LED Flat EQ LED Bass Boost EQ LED Headphone Volume Equalizer Button Press to cycle through EQ modes Dolby® Surround 7.
Usage with USB Audio Control Box (PC/Mac) To use the headset to your computer, connect the headset’s 3.5mm plug to the female 3.5mm jack on the USB Audio Control Box, then plug the USB cable into your computer. Using with USB Audio Control Box Document No. 480HX-HSCRS001.
Configuration with USB Audio Control Box (Windows) For optimal surround sound performance configure Windows using the steps below. 1. Right-click the speaker icon in the task tray and select ‘Playback Devices’. 2. Right-click on ‘HyperX Cloud Revolver S’ and select ‘Set as Default Device’. Document No. 480HX-HSCRS001.
3. With ‘HyperX Cloud Revolver S’ selected click on the ‘Configure’ button. 4. In the ‘Audio channels’ list select 7.1 Surround and click on ‘Next’. 5. In the ‘Optional speakers’ list make sure all boxes are checked then click ‘Next’. 6. In the ‘Full-range speakers’ list make sure all boxes are checked then click ‘Next’. 7. Click ‘Finish’ to save the settings. Document No. 480HX-HSCRS001.
8. Click on the ‘Recording’ tab, then right-click ‘HyperX Cloud Revolver S’ and select ‘Set as Default Device’. Your HyperX Cloud Revolver S is now ready to use. Document No. 480HX-HSCRS001.
Configuration with USB Audio Control Box (Mac) For optimal surround sound performance configure Mac using the steps below. 1. Click the Apple menu, then select ‘System Preferences’. 2. In ‘System Preferences’ click on ‘Sound’. Document No. 480HX-HSCRS001.
3. Select output then select ‘HyperX Cloud Revolver S’. 4. Select input then select ‘HyperX Cloud Revolver S’. Document No. 480HX-HSCRS001.
5. Open Finder then select Applications > Utilities > Audio MIDI Setup. 6. Select ‘HyperX Cloud Revolver S’ then select Output. 7. Click the ‘Format’ drop down and select ‘8 ch 16-bit Integer 44.1 kHz’. 8. Click ‘Configure Speakers’. Document No. 480HX-HSCRS001.
9. Click the ‘Configuration’ drop down and select 7.1 Surround. 10. Click Apply. Your HyperX Cloud Revolver S is now ready to use. Document No. 480HX-HSCRS001.
Usage (PC) with PC extension cable To connect the headset to your computer (or other device) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female 3.5mm jack on the PC extension cable. The PC extension cable has two 3.5mm plugs. The headphone plug, which has green stripes, plugs into the port signified by a green input or headphone symbol .
Usage (Xbox One™ & Xbox One S™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller *Headset If your Xbox One controller does not have a 3.5mm jack you will need the Xbox One Stereo adapter (sold separately) that plugs into the Xbox One controller (pictured below.) ™ ™ ™ * Using with Xbox One Document No. 480HX-HSCRS001.
Usage (PS4™ & PS4™ Pro) with USB Audio Control Box To use the headset with PlayStation™ 4 (PS4™), connect the headset’s 3.5mm plug to the female 3.5mm jack on the USB audio control box, then plug the USB cable to the PS4™ USB port. Once the ‘HyperX Cloud Revolver S’ device is detected configure the PS4™ Audio Devices using the steps below: 1. Turn on your PS4 ™ game console. 2. Navigate to the Settings Menu and select it. 3. Highlight the ‘Devices’ menu option and select it. 4.
Usage (PS4™ & PS4™ Pro) with direct 3.5mm connection To use the headset with PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps: 1. Turn on your PS4 ™ game console. 2. Navigate to the Settings Menu and select it. 3. Highlight the ‘Devices’ menu option and select it. 4. Scroll down to ‘Audio Devices’ and select it. 5. Choose ‘Output to Headphones’ and select ‘All Audio.’ Using with PS4 Document No. 480HX-HSCRS001.
Usage (Wii U™) To use the headset with Wii U™, connect the 3.5mm plug on the headset directly to the Wii U™ gamepad controller. Using with Wii U Document No. 480HX-HSCRS001.
Usage (Mobile Device) To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device. Using with mobile device (phone, tablet or notebook) Document No. 480HX-HSCRS001.
Auriculares HyperX Cloud Revolver S Números de referencia: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA N.º de documento 480HX-HSCRS001.
ÍNDICE Introducción ............................................................................................................................ 3 Elementos incluidos ............................................................................................................... 3 Características ....................................................................................................................... 4 Especificaciones técnicas ...................................................................
Introducción HyperX™ Cloud Revolver S está preparado para la acción con audio envolvente Dolby® Surround 7.1 virtual Plug N Play y sin necesidad de software. Escucha cada paso, explosión y disparo con una claridad cinemática gracias al sonido preciso que proporcionan los altavoces de siete posiciones simuladas con distancia y profundidad. La avanzada tarjeta de sonido DSP USB puede con todo, proporciona sonido de excelente calidad constante sin importar en qué sistema estés jugando.
Características • Tecnología de audio envolvente Dolby® Surround 7.
Visión general A. Resistente estructura de acero B. Diadema en suspensión C. Micrófono extraíble con cancelación del ruido D. Cable incluido con clavija de 3,5 mm de 4 polos E. Caja de control de audio USB F. Alargador para PC N.º de documento 480HX-HSCRS001.
Funcionamiento de la caja de control de audio USB La caja de control de audio USB tiene las siguientes funciones: • • • • • Tecnología de audio envolvente Dolby® Surround 7.
Uso con caja de control de audio USB (PC/Mac) Para utilizar los auriculares con tu ordenador, conecta la clavija de 3,5 mm de los auriculares a la entrada de 3,5 mm de la caja de control de audio USB y, a continuación, enchufa el cable USB a tu ordenador. Uso con la caja de control de audio USB N.º de documento 480HX-HSCRS001.
Configuración con la caja de control de audio USB (Windows) Para obtener un rendimiento de sonido envolvente óptimo, configura Windows siguiendo los pasos a continuación. 1. Haz clic derecho en el icono del altavoz en la barra de tareas y selecciona ‘Dispositivos de reproducción’. 2. Haz clic derecho en ‘HyperX Cloud Revolver S’ y selecciona ‘Establecer como dispositivo predeterminado’. N.º de documento 480HX-HSCRS001.
3. Con ‘HyperX Cloud Revolver S’ seleccionado, haz clic en el botón ‘Configurar’. 4. En la lista ‘Canales de audio’, selecciona 7.1 Surround y haz clic en ‘Siguiente’. 5. En la lista ‘Altavoces opcionales’, asegúrate de que todas las casillas estén marcadas y haz clic en ‘Siguiente’. 6. En la lista ‘Altavoces de gama completa’, asegúrate de que todas las casillas estén marcadas y haz clic en ‘Siguiente’. 7. Haz clic en ‘Finalizar’ para guardar los ajustes. N.º de documento 480HX-HSCRS001.
8. Haz clic en ‘la pestaña Grabación y, a continuación, haz clic derecho en ‘HyperX Cloud Revolver S’ y selecciona ‘Establecer’ como dispositivo predeterminado’. Tu HyperX Cloud Revolver S está ahora listo para usarse. N.º de documento 480HX-HSCRS001.
Configuración con la caja de control de audio USB (Mac) Para obtener un rendimiento de sonido envolvente óptimo, configura Mac siguiendo los pasos a continuación. 1. Haz clic en el menú de Apple y, a continuación, selecciona ‘Preferencias del sistema’. 2. En ‘Preferencias del sistema’, haz clic en ‘Sonido. N.º de documento 480HX-HSCRS001.
3. Selecciona una salida y, a continuación, selecciona ‘HyperX Cloud Revolver S’. 4. Selecciona entrada y, a continuación, selecciona ‘HyperX Cloud Revolver S’. N.º de documento 480HX-HSCRS001.
5. Abre el buscador y selecciona Aplicaciones > Utilidades > Configuración de Audio MIDI. 6. Selecciona ‘HyperX Cloud Revolver S’ y, a continuación, selecciona Salida. 7. Haz clic en el menú desplegable ‘Formato’ y selecciona ‘8 canales de enteros de 16 bits a 44,1 kHz’. 8. Haz clic en ‘Configurar altavoces’. N.º de documento 480HX-HSCRS001.
9. Haz clic en el menú desplegable ‘Configuración’ y selecciona 7.1 Surround. 10. Haz clic en Aplicar. Tu HyperX Cloud Revolver S está ahora listo para usarse. N.º de documento 480HX-HSCRS001.
Uso (PC) con alargador de PC Para conectar los auriculares a tu ordenador (u otro dispositivo) que cuente con una entrada para micrófono y para auriculares, conecta el conector de 3,5 mm de los auriculares a la entrada de 3,5 mm del alargador para PC. El alargador de PC tiene dos conectores de 3,5 mm. La clavija de los auriculares tiene bandas de color verde y se conecta directamente en el puerto marcado con ese color o con el símbolo de auriculares .
Uso (Xbox One™ y Xbox One S™) Para usar los auriculares con un sistema Xbox One™, conecta el conector de 3,5 mm de los auriculares directamente en la entrada de 3,5 mm del mando de Xbox One™ * Si tu mando de Xbox One ™ no tiene una entrada de 3,5 mm, necesitarás el adaptador para auriculares estéreo de Xbox One™ (se vende por separado) que se conecta al mando de Xbox™ One (que se ve en la imagen siguiente). * Uso con Xbox One N.º de documento 480HX-HSCRS001.
Uso (PS4™ y PS4™ Pro) con caja de control de audio USB Para utilizar los auriculares con un sistema PlayStation™ 4 (PS4™), conecta el conector de 3,5 mm de los auriculares a la entrada de 3,5 mm de la caja de control de audio USB y, a continuación, conecta el cable USB al puerto USB del sistema PS4™. Cuando se detecte el ‘dispositivo HyperX Cloud Revolver S, configura los dispositivos de audio de PS4™ siguiendo los pasos a continuación: ™ 1. Enciende tu videoconsola PS4 . 2.
Uso (PS4™ y PS4™ Pro) con conexión directa de 3,5 mm Para usar los auriculares con un sistema PlayStation™ 4 (PS4™), conecta la clavija de 3,5 mm de los auriculares directamente con el mando de juego PS4™ y sigue estos pasos: ™ 1. Enciende tu videoconsola PS4 . 2. Ve al menú de ajustes y selecciónalo. 3. Resalta la opción de menú ‘Devices’ (Dispositivos) y selecciónala. 4. Desplázate hacia abajo hasta ‘Audio Devices’ (Dispositivos de audio) y selecciónalo. 5.
Uso (Wii U™) Para usar los auriculares con un sistema Wii U™, conecta la clavija de 3,5 mm de los auriculares directamente con el mando Wii U™. Uso con Wii U N.º de documento 480HX-HSCRS001.
Uso (dispositivos móviles) Para usar los auriculares con un dispositivo móvil (o con otro dispositivo) con una clavija para auriculares (CTIA de 4 polos), conecta la clavija de 3,5 mm directamente con la clavija para auriculares del dispositivo. Uso con un dispositivo móvil (teléfono, tableta o portátil) N.º de documento 480HX-HSCRS001.
HyperX Cloud Revolver S Kopfhörer Bauteilnummern: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA Dokument Nr. 480HX-HSCRS001.
INHALTSVERZEICHNIS Einführung .............................................................................................................................. 3 Was ist alles drin enthalten? .................................................................................................. 3 Funktionen ............................................................................................................................. 4 Technische Daten ..................................................................
Einführung HyperX™ Cloud Revolver S wurde für Plug N Play virtual Dolby® Surround 7.1 audio entwickelt – es ist keine Software erforderlich. Über die sieben aufgestellten Lautsprecher hörst du jeden Schritt, jede Explosion und jeden Schuss in Kinoqualität glasklar und mit einem Gefühl von Entfernung und Tiefe. Die erweiterte USB DSP-Soundkarte kommt mit allem klar und liefert dir immer hervorragenden Sound, egal auf welchem System sie verwendet wird.
Funktionen • Plug N Play Dolby® Surround 7.1 Audiotechnologie • Advanced USB Audio-Kontrollbox mit DSP Soundkarte • Sound-Stage in Studioqualität • Typischer HyperX Memory Foam • Breites Stirnband für maximalen Komfort Technische Daten Kopfhörer • Treiber: Dynamic, 50 mm mit Neodymium-Magneten • Typ: Ohrumschließend, hinten verschlossen • Frequenzgang: 12 Hz – 28.000 Hz • Impedanz: 30 Ω • Schalldruckpegel: 100.5 dBSPL / mW bei 1 kHz • T.H.D.
Übersicht A. Langlebiger Stahlrahmen B. Einstellbares Stirnband C. Abnehmbares rauschminderndes Mikrofon D. Angeschlossenes Kabel mit 4 Polen, 3,5 mm Stecker E. USB-Audio-Kontrolbox F. PC-Verlängerungskabel Dokument Nr. 480HX-HSCRS001.
Bedienung der USB-Audio-Kontrollbox Die USB-Audio-Kontrollbox verfügt über folgende Funktionen: • • • • • Dolby® Surround 7.1 Audio-Technologie 3 voreingestellte Equalizer-Modi Mikrofon-Stummschaltung Einstellung der Kopfhörer-Lautstärke Einstellung der Mikrofon-Lautstärke Vocals EQ LED Flat EQ LED Bass Boost EQ LED Kopfhörer Lautstärke Equalizer-Knopf um durch die EQ-Modi zu schalten Dolby® Surround 7.
Verwendung mit USB-Audio-Kontrollbox (PC/Mac) Um den Kopfhörer mit Ihrem Computer zu verwenden, verbinde den 3,5 mm KopfhörerStecker mit der weiblichen 3,5-Buchse an der USB Audio Control Box und stecke das USB-Kabel in deinen Computer. Verwendung der USB Audio Control Box Dokument Nr. 480HX-HSCRS001.
Konfiguration der USB-Audio-Kontrollbox (Windows) Konfiguriere Windows mit den unten stehenden Schritten, um einen optimalen SurroundSound zu erhalten. 1. Klicke auf das Lautsprechersymbol in der Taskleiste und klicke auf „Wiedergabe-Geräte“. 2. Klicke rechts auf „HyperX Cloud Revolver S“ und dann auch „Als Standardgerät auswählen“. Dokument Nr. 480HX-HSCRS001.
3. Klicke dann auf den „Konfigurieren“-Knopf. 4. Wähle in der „Audiokanäle“Liste 7.1 Surround aus und klicke auf „weiter“.. 5. Achte darauf, dass in der „Zusätzliche Lautsprecher“Liste alle Kästchen angekreuzt sind und klicke dann auf „Weiter“. 6. Achte darauf, dass in der Liste „Full-Range Speakers“ alle Kästchen angekreuzt sind und klicke auf „Weiter“. 7. Klicke auf „Fertigstellen“, um die Einstellungen abzuspeichern. Dokument Nr. 480HX-HSCRS001.
8. Klicke auf den „Aufnehmen“Tab und dann einen Rechtsklick auf „HyperX Cloud Revolver S“ und wähle „Als Standardgerät festlegen“ aus. Dein HyperX Cloud Revolver S kann jetzt verwendet werden. Dokument Nr. 480HX-HSCRS001.
Konfiguration mit USB-Audio-Kontrollbox (Mac) Für optimalen Surround-Sound musst du deinen Mac folgendermaßen konfigurieren: 1. Klicke auf das Apple-Menü, dann auf „Systemeinstellungen“. 2. Klicke in den „Systemeinstellungen“ auf „Sound“. Dokument Nr. 480HX-HSCRS001.
3. Wähle Ausgabe aus und dann „HyperX Cloud Revolver S“. 4. Wähle Eingabe aus und dann „HyperX Cloud Revolver S“. Dokument Nr. 480HX-HSCRS001.
5. Öffne die Suche und wähle Anwendungen > Utilities > Audio MIDI-Setup. 6. Wähle den „HyperX Cloud Revolver S“ aus und klicke auf Ausgabe. 7. Klicke auf das „Format“Dropdown-Menü und wähle „8 Ch 16-bit Integer 44,1 kHz“ aus. 8. Klicke auf „Lautsprecher konfigurieren“. Dokument Nr. 480HX-HSCRS001.
9. Klicke auf das „Konfiguration“Dropdown-Menü und wähle 7.1 Surround aus. 10. Klicke auf „Übernehmen“. Dein HyperX Cloud Revolver S kann jetzt verwendet werden. Dokument Nr. 480HX-HSCRS001.
Verwendung (PC) mit Verlängerungskabel Um den Kopfhörer mit deinem Computer zu verbinden (oder mit einem anderen Gerät), welches über einen Kopfhöreranschluss und eine Mikrofonbuchse verfügt, musst du den Kopfhörer 3,5 mm-Stecker in die weibliche 3,5 mm Buchse am PC-Verlängerungskabel stecken. Das PC-Verlängerungskabel verfügt über zwei 3,5 mm Stecker. Der KopfhörerAnschluss mit den grünen Streifen gehört in die Buchse mit der grünen Kennzeichnung oder dem Kopfhörer-Symbol.
Verwendung (Xbox One™ & Xbox One S™) Um die Kopfhörer mit der Xbox One™ zu nutzen, musst du den 3,5 mm Stecker am Kopfhörer direkt in die 3,5 mm Buchse am Xbox One™-Controller stecken. * Wenn dein Xbox One™-Controller über keine 3,5 mm Buchse verfügt, brauchst du den Xbox One™ Kopfhörer-Adapter (separat erhältlich), den du in den Xbox One™-Controller einstecken musst (siehe Bild unten). * Verwendung mit Xbox One Dokument Nr. 480HX-HSCRS001.
Verwendung mit USB-Audio-Kontrollbox (PS4™ & PS4™ Pro) Um die Kopfhörer mit der PlayStation 4™ (PS4™) zu nutzen, musst du den 3,5 mm Stecker des Kopfhörers in die 3,5 mm Buchse an der USB-Audio Control Box stecken und dann das USB-Kabel in die UBS-Buchse der PS4. Sobald das Gerät „HyperX Clo Revolver S“ erkannt wurden, musst du die PS4™-Audiogeräte folgendermaßen konfigurieren: 1. Schalte die PS4™ ein. 2. Geh ins Einstellungen-Menü und klicke darauf. 3. Markiere die „Geräte“-Menüoption und wähle sie aus. 4.
Nutzung (PS4™ & PS4™ Pro) mit direkter 3,5 mm Verbindung. Um die Kopfhörer mit der Playstation 4 (PS4) zu nutzen, verbinde den 3,5 mm-Stecker am Kopfhörer direkt mit dem PS4 Game-Controller und gehe folgendermaßen vor: 1. Schalte die PS4 ein. 2. Geh ins Einstellungen-Menü und klicke darauf. 3. Markiere die „Geräte“-Menüoption und wähle sie aus. 4. Scrolle runter bis zu „Audio Geräte“ und klicke darauf. 5. Wähle „Ausgang auf Kopfhörer“ und klicke auf „Alle Audio“. Verwendung mit PS4 Dokument Nr.
Nutzung (Wii U™) Um die Kopfhörer mit Wii U™ zu verwenden, schließe den 3,5 mm Stecker am Kopfhörer direkt in den Gamepad-Controller der Wii U™. Verwendung mit Wii U Dokument Nr. 480HX-HSCRS001.
Nutzung (mobiles Gerät) Um die Kopfhörer mit einem Mobilgerät (oder einem anderen Gerät) mit Kopfhörerbuchse (vierpolig CTIA) zu verwenden, verbinde den 3,5 mm Stecker direkt mit der Kopfhörerbuchse an deinem Gerät. Verwendung mit mobilen Geräten (Smartphone, Tablet oder Notebook) Dokument Nr. 480HX-HSCRS001.
Casque-micro HyperX Cloud Revolver S Références : HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA Document No. 480HX-HSCRS001.
TABLE DES MATIÈRES Introduction ............................................................................................................................ 3 Le produit inclut : .................................................................................................................... 3 Caractéristiques ..................................................................................................................... 4 Caractéristiques techniques .................................................
Introduction HyperX™ Cloud Revolver S est prêt pour l’action avec son système audio Surround 7.1 Dolby® virtuel Plug N Play. Ne nécessite aucun logiciel. Entendez chaque pas, chaque explosion, chaque tir avec une clarté cinématique, grâce aux sept haut-parleurs positionnels simulés qui reproduise un son d’une grande précision, dans la distance et la profondeur. La carte son DSP USB avancée prend tout en charge, produisant un son de haute qualité toujours cohérent, quel que soit le système utilisé.
Caractéristiques • Technologie audio Surround 7.
Présentation A. Structure acier durable B. Arceau suspendu C. Microphone amovible à réduction du bruit D. Câble fixe avec connecteur 3,5mm à 4 broches E. Boîtier de commande audio USB F. Câble d’extension PC Document No. 480HX-HSCRS001.
Fonctionnement du boîtier de commande audio USB Caractéristiques du boîtier de commande audio USB • • • • • Technologie audio Dolby® Surround 7.1 Trois modes égaliseur prédéfinis Désactivation du microphone Réglage du volume du casque Réglage du volume du microphone LED EQ Voix LED EQ Plat LED EQ Bass Boost Casque audio Volume Bouton Égaliseur Appuyez pour faire défiler les modes EQ Bouton Son Dolby® Surround 7.
Utilisation avec le boîtier de commande audio USB (PC/Mac) Pour utiliser le casque avec votre ordinateur, connectez la prise 3,5 mm du casque au jack femelle 3,5 mm sur le boîtier de commande audio USB, puis branchez le câble USB à l’ordinateur. Utilisation avec le boîtier de commande audio USB Document No. 480HX-HSCRS001.
Configuration avec le boîtier de commande audio USB (Windows) Pour bénéficier d’une performance audio optimale avec le son Surround, configurez Windows en suivant les instructions ci-dessous. 1. Cliquez avec le bouton droit de la souris sur l’icône Hautparleur dans zone de notification et sélectionnez « Dispositifs de lectura ». 2. Cliquez avec le bouton droit de la souris sur « HyperX Cloud Revolver S » et sélectionnez « Définir comme dispositif par défaut ». Document No. 480HX-HSCRS001.
3. Lorsque « HyperX Cloud Revolver S » est sélectionné, cliquez sur le bouton « Configurer ». 4. Dans la liste « Canaux audio », sélectionnez Surround 7.1 et cliquez sur « Suivant ». 5. Dans la liste « Haut-parleurs », vérifiez que toutes les cases sont cochées. Cliquez sur « Suivant ». 6. Dans la liste « Haut-parleurs Gamme complète », vérifiez que toutes les cases sont cochées. Cliquez sur « Suivant ». 7. Cliquez sur « Terminer » pour enregistrer les paramètres choisis. Document No. 480HX-HSCRS001.
8. Cliquez sur l’onglet « Enregistrement ». Ensuite, cliquez avec le bouton droit de la souris sur « HyperX Cloud Revolver S » et sélectionnez Définir comme dispositif par défaut. Votre HyperX Cloud Revolver S est prêt à être utilisé. Document No. 480HX-HSCRS001.
Configuration avec le boîtier de commande audio USB (Mac) Pour bénéficier d’une performance audio optimale avec le son Surround, configurez votre Mac en suivant les instructions ci-dessous. 1. Cliquez sur le menu Apple, puis sélectionnez « Préférences du système ». 2. Dans « Préférences du système, cliquez sur « Son ». Document No. 480HX-HSCRS001.
3. Choisissez la sortie, puis sélectionnez « HyperX Cloud Revolver S ». 4. Choisissez l’entrée, puis sélectionnez « HyperX Cloud Revolver S ». Document No. 480HX-HSCRS001.
5. Ouvrez le Finder, puis sélectionnez Applications > Utilitaires > Config. Audio MIDI. 6. Sélectionnez « HyperX Cloud Revolver S », puis choisissez la sortie. 7. Cliquez sur le menu déroulant « Format » et sélectionnez « 8 ch 16-bit Integer 44.1 kHz ». 8. Cliquez sur « Configurer les haut-parleurs ». Document No. 480HX-HSCRS001.
9. Cliquez sur le menu déroulant « Configuration » et sélectionnez Surround 7.1. 10. Cliquez sur Appliquer. Votre HyperX Cloud Revolver S est prêt à être utilisé. Document No. 480HX-HSCRS001.
Utilisation avec le câble d’extension (PC) Pour brancher le casque sur votre ordinateur (ou autre dispositif) équipé d’un connecteur audio et d’un connecteur microphone, insérez le connecteur 3,5 mm du casque au jack femelle 3,5 mm du câble d’extension PC. Le câble d’extension PC est équipé de deux connecteurs 3,5 mm. Le connecteur du casque (avec des rayures vertes) se branche sur le port identifié par la couleur verte ou le symbole du casque .
Utilisation (Xbox One™ & Xbox One S™) Pour utiliser le casque-micro avec une Xbox One™, branchez le connecteur 3,5mm du casque directement sur le connecteur 3,5mm de la console Xbox™. *stéréo Si votre console Xbox One n’a pas de prise 3,5mm, vous devez utiliser l’adaptateur de casque Xbox One (vendu séparément) qui se branche sur la console Xbox One (illustrée ci-dessous). ™ ™ ™ * ™ Utilisation avec une Xbox One Document No. 480HX-HSCRS001.
Utilisation (PS4™ & PS4™ Pro) avec le boîtier de commande audio USB Pour utiliser le casque avec votre PlayStation™ 4 (PS4™), connectez la prise 3,5 mm du casque au jack femelle 3,5 mm sur le boîtier de commande audio USB, puis branchez le câble USB au port PS4™ USB. Lorsque le dispositif HyperX Cloud Revolver S est détecté, configurez les dispositifs audio PS4™ en suivant les étapes ci-dessous : ™ 1. Allumez votre console de jeu PS4 . 2. Ouvrez le menu Paramètres. 3.
Utilisation (PS4™ & PS4™ Pro) avec une connexion directe 3,5 mm Pour utiliser le casque-micro avec une PlayStation™ 4 (PS4™), branchez le connecteur 3,5mm du casque directement sur la console PS4™ et suivez les instructions ci-dessous : ™ 1. Allumez votre console de jeu PS4 . 2. Ouvrez le menu Paramètres. 3. Sélectionnez l’option de menu « Périphériques ». 4. Faites défiler et sélectionnez « Périphériques audio ». 5. Choisissez « Sortie casque » et sélectionnez « Tout Audio ».
Utilisation (Wii U™) Pour utiliser le casque-micro avec une console Wii U™, branchez le connecteur 3,5mm du casque directement sur la Wii U™. Utilisation avec une Wii U Document No. 480HX-HSCRS001.
Utilisation (dispositif mobile) Pour utiliser le casque-micro avec un dispositif mobile (ou autre dispositif) doté d’un connecteur de casque (CTIA à quatre broches), branchez son connecteur 3,5 mm directement dans la prise casque du dispositif. Utilisation avec un dispositif mobile (téléphone, tablette ou ordinateur portable) Document No. 480HX-HSCRS001.
Cuffie HyperX Cloud Revolver S Numeri di parte: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA Documento N. 480HX-HSCRS001.
SOMMARIO Introduzione ........................................................................................................................... 3 Contenuto della confezione .................................................................................................... 3 Caratteristiche ........................................................................................................................ 4 Specifiche tecniche ...........................................................................
Introduzione Le cuffie HyperX™ Cloud Revolver S sono nate per l’azione, con il loro audio virtuale Dolby® Surround 7.1 di tipo Plug N Play che non richiede l’uso di software. Potrai avvertire distintamente ogni singolo passo, esplosione o colpo di pistola con la stessa chiarezza di una sala cinema, grazie agli altoparlanti che simulano sette diversi punti di ascolto, capaci di decodificare con precisione distanza e profondità.
Caratteristiche • Tecnologia audio Dolby® Surround 7.1 di tipo Plug N Play • Modulo di controllo USB con comandi avanzati e scheda audio DSP • Audio tridimensionale di livello studio • Esclusiva soluzione in memory foam di HyperX • Ampia fascia per il massimo comfort Specifiche tecniche Cuffie • Driver: dinamici da 50mm con magneti al neodimio • Tipo: circumaurale, chiuso sul retro • Risposta in frequenza: 12Hz-28.
Panoramica A. Telaio in robusto acciaio B. Fascia a sospensione C. Microfono scollegabile con cancellazione del rumore D. Cavo con jack da 3,5 mm a 4 poli E. Modulo di controllo audio USB F. Prolunga PC Documento N. 480HX-HSCRS001.
Utilizzo del modulo di controllo audio USB Il modulo di controllo audio USB dispone delle seguenti caratteristiche: • • • • • Tecnologia audio Dolby® Surround 7.1 3 modalità di equalizzazione predefinite Esclusione microfono Regolazione volume cuffie Regolazione volume microfono LED EQ Voce LED EQ Flat LED EQ Bass Boost Volume cuffie Pulsante equalizzatore Premere per attivare le modalità EQ Pulsante Dolby® Surround 7.
Uso con modulo di controllo audio USB (PC/Mac) Per utilizzare le cuffie con un computer, collegare il jack audio da 3,5mm delle cuffie al jack femmina da 3,5mm del modulo di controllo audio USB, quindi collegare il cavo USB al computer. Uso con il modulo di controllo audio USB Documento N. 480HX-HSCRS001.
Configurazione del modulo di controllo audio USB (Windows) Per un’esperienza audio surround ottimale, configurare il sistema Windows tramite le istruzioni fornite di seguito: 1. Fare clic con il pulsante destro del mouse sull’icona degli altoparlanti nella barra delle attività e selezionare “Dispositivi di riproduzione”. 2. Fare clic con il pulsante destro del mouse su “HyperX Cloud Revolver S” e selezionare “Imposta come dispositivo predefinito”. Documento N. 480HX-HSCRS001.
3. Dopo aver selezionato “HyperX Cloud Revolver S”, fare clic sul pulsante “Configura”. 4. Nell’elenco “Canali audio” selezionare 7.1 Surround e fare clic su “Avanti”. 5. Nell’elenco “Altoparlanti opzionali” verificare che siano selezionate tutte le caselle e fare clic su “Avanti”. 6. Nell’elenco “Altoparlanti fullrange” verificare che siano selezionate tutte le caselle e fare clic su “Avanti”. 7. Fare clic su “Fine” per salvare le impostazioni. Documento N. 480HX-HSCRS001.
8. Fare clic sulla scheda “Registrazione” per poi fare clic con il pulsante destro del mouse su “HyperX Cloud Revolver S” e selezionare “Imposta come dispositivo predefinito”. Le cuffie HyperX Cloud Revolver S sono pronte per l’utilizzo. Documento N. 480HX-HSCRS001.
Configurazione del modulo di controllo audio USB (Mac) Per un’esperienza audio surround ottimale, configurare il sistema Mac tramite le istruzioni fornite di seguito: 1. Fare clic sul menu Apple, quindi selezionare “Preferenze di Sistema”. 2. Nel menu “Preferenze di Sistema”, fare clic su “Suono”. Documento N. 480HX-HSCRS001.
3. Selezionare Uscita quindi selezionare “HyperX Cloud Revolver S”. 4. Selezionare l’ingresso quindi selezionare “HyperX Cloud Revolver S”. Documento N. 480HX-HSCRS001.
5. Aprire il Finder e selezionare Applicazioni > Utility > Configurazione MIDI Audio. 6. Selezionare “HyperX Cloud Revolver S” quindi selezionare Output. 7. Fare clic su “Formato” nel menu a comparsa e selezionare “8can 16-bit Num Interi 44.1 kHz”. 8. Fare clic su “Configura altoparlanti”. Documento N. 480HX-HSCRS001.
9. Fare clic sull’elenco a discesa “Configurazione” e selezionare Surround 7.1. 10. Fare clic su Applica. Le cuffie HyperX Cloud Revolver S sono pronte per l’utilizzo. Documento N. 480HX-HSCRS001.
Uso con la prolunga PC Per utilizzare le cuffie con un computer (o altro dispositivo) che disponga di connessioni separate per microfono e cuffie, collegare il jack audio da 3,5mm delle cuffie al jack femmina da 3,5mm della prolunga PC. La prolunga per PC termina con due jack audio da 3,5mm. Il jack delle cuffie che presenta le bande verdi va inserito nella porta contrassegnata dal colore verde o dal simbolo delle cuffie ( ).
Utilizzo con Xbox One™ e Xbox One S™ Per utilizzare le cuffie con la console Xbox One™, collegare il jack da 3,5mm delle cuffie direttamente al connettore da 3,5mm presente sul controller della console Xbox One™. * Se il controller della console Xbox One ™ non è dotato di connettore da 3,5mm, è necessario procurarsi un adattatore cuffie stereo per Xbox One™ (venduto separatamente), che andrà collegato al controller della console Xbox One™ (come illustrato di seguito).
Utilizzo con PS4™ e PS4™ Pro tramite il modulo di controllo audio USB Per utilizzare le cuffie con la console PlayStation™ 4 (PS4™), collegare il jack audio da 3,5mm delle cuffie al jack femmina da 3,5mm del modulo di controllo audio USB, quindi collegare il cavo USB alla porta USB della console PS4™. Una volta che sarà stato rilevato il dispositivo “HyperX Cloud Revolver S”, configurare i dispositivi audio della console PS4™ tramite le istruzioni fornite di seguito: ™ 1. Accendere la console PS4 . 2.
Utilizzo con PS4™ e PS4™ Pro tramite connessione diretta con jack da 3,5mm Per utilizzare le cuffie con la console PlayStation™ 4 (PS4™), collegare il jack da 3,5mm delle cuffie direttamente al controller di gioco della console PS4™. Quindi procedere come descritto di seguito: ™ 1. Accendere la console PS4 . 2. Accedere al menu delle impostazioni e selezionarlo. 3. Evidenziare la voce di menu “Devices” (dispositivi) e selezionarla. 4.
Utilizzo con Wii U™ Per utilizzare le cuffie con la console Wii U™, collegare il jack da 3,5mm delle cuffie direttamente al controller gamepad della console Wii U™. Utilizzo con la console Wii U Documento N. 480HX-HSCRS001.
Utilizzo con dispositivi mobili Per utilizzare le cuffie con un dispositivo mobile (o altro dispositivo) tramite un connettore per cuffie (CTIA a 4 poli), inserire il jack da 3,5mm direttamente nella presa cuffie del dispositivo. Utilizzo con dispositivo mobile (smartphone, tablet o notebook) Documento N. 480HX-HSCRS001.
Headset HyperX Cloud Revolver S Números das Peças: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA Documento No. 480HX-HSCRS001.
ÍNDICE Introdução .............................................................................................................................. 3 O que está incluído: ............................................................................................................... 3 Características ....................................................................................................................... 4 Especificações técnicas ....................................................................
Introdução HyperX™ Cloud Revolver S foi projetado com áudio virtual Dolby® Surround 7.1 Plug N Play sem necessidade de software. Ouça cada passo, explosão e tiro com clareza cinemátografica através da simulação de sete alto-falantes que proporcionam sons precisos com sensação de distância e profundidade. A placa de som DSP USB oferece som de qualidade superior independentemente do sistema em que você está jogando.
Características • Tecnologia de áudio Dolby® Surround 7.1 Plug N Play • Placa de som DSP com controle de áudio USB • Palco sonoro com qualidade estúdio • Espuma exclusiva HyperX • Tira de cabeça mais larga para máximo conforto Especificações técnicas Fone de ouvido • Driver: Dinâmico, 50 mm com imãs de neodímio • Tipo: Circumaural, fechado • Resposta de frequência: 12Hz–28.000 Hz • Impedância: 30 Ω • Nível de pressão sonora: 100,5dBSPL/mW a 1kHz • T.H.D.
Visão geral A. Estrutura durável em aço B. Arco da cabeça suspenso C. Microfone removível com redução de ruído D. Cabo integrado com plugue de 3,5 mm de 4 polos E. Placa de som USB F. Cabo de extensão para PC Documento No. 480HX-HSCRS001.
Operação da placa de som USB A placa de som USB possui as seguintes características: • • • • • Tecnologia de áudio Dolby® Surround 7.1 3 modos de equalização predefinidos Silenciar microfone/ mudo Ajuste do volume do fone de ouvido Ajuste do volume do microfone LED do EQ Vocal LED do EQ Flat LED do EQ de Bass Boost Fone de ouvido Volume Botão do Equalizador Pressione para alternar entre os modos do EQ Botão Dolby® Surround 7.
Uso com Placa de som USB (PC/Mac) Para usar o headset em seu computador, conecte o plugue de 3,5 mm do headset à entrada de 3,5 mm da Placa de som USB e em seguida conecte o plugue USB ao seu computador. Utilizando com a Placa de som USB Documento No. 480HX-HSCRS001.
Configurações com a Placa de som USB (Windows) Para o melhor desempenho do som surround, configure o Windows utilizando as etapas abaixo. 1. Clique com o botão direito no ícone do alto-falante na barra de tarefas e selecione ‘Dispositivos de Reprodução’. 2. Clique com o botão direito em ‘HyperX Cloud Revolver S’ e selecione ‘Definir como Dispositivo Padrão’. Documento No. 480HX-HSCRS001.
3. Com o ‘HyperX Cloud Revolver S’ selecionado, clique no botão ‘Configurar’. 4. Na lista ‘Canais de Áudio’ selecione 7.1 Surround e clique em ‘Continuar’. 5. Na lista ‘Alto-falantes opcionais’ certifique-se de que todas as caixas estejam marcadas e depois clique em ‘Continuar’. 6. Na lista ‘Alto-falantes de espectro total’ certifique-se de que todas as caixas estejam marcadas e depois clique em ‘Continuar’. 7. Clique em ‘Concluir’ para salvar as configurações. Documento No. 480HX-HSCRS001.
8. Clique na guia ‘Gravação', depois clique com o botão direito em ‘HyperX Cloud Revolver S’ e selecione ‘Definir como Dispositivo Padrão’. Seu HyperX Cloud Revolver S agora está pronto para ser usado. Documento No. 480HX-HSCRS001.
Configurações com a Placa de som USB (Mac) Para o melhor desempenho do som surround, configure o Mac utilizando as etapas abaixo. 1. Clique no menu Apple, depois selecione ‘Preferências do Sistema’. 2. Em ‘Preferências do Sistema’ clique em ‘Som’. Documento No. 480HX-HSCRS001.
3. Selecione saída e então selecione ‘HyperX Cloud Revolver S’. 4. Selecione entrada e depois selecione ‘HyperX Cloud Revolver S’. Documento No. 480HX-HSCRS001.
5. Abra o Finder e depois selecione Aplicativos > Utilitários > Audio MIDI Setup. 6. Selecione ‘HyperX Cloud Revolver S’e depois selecione Saída. 7. Clique na lista suspensa ‘Formatar’ e selecione ‘8 canais 16 bits de processamento integral 44,1 kHz’. 8. Clique em ‘Configurar alto-falantes’. Documento No. 480HX-HSCRS001.
9. Clique na lista suspensa ‘Configuração’ e selecione 7.1 Surround. 10. Clique em Aplicar. Seu HyperX Cloud Revolver S agora está pronto para ser usado. Documento No. 480HX-HSCRS001.
Utilizando (PC) com o cabo de extensão para PC Para conectar o headset ao seu computador (ou outro dispositivo) que tenha tanto uma entrada de fone de ouvido quanto uma entrada de microfone, conecte o plugue de 3,5 mm do headset à entrada de 3,5 mm do cabo de extensão para PC. O cabo de extensão para PC tem dois plugues de 3,5 mm. O plugue do fone de ouvido, que tem listras verdes, conecta-se na porta identificada com uma entrada verde ou símbolo de fone de ouvido .
Uso (Xbox One™ e Xbox One S™) Para usar o headset com o Xbox One™, conecte o plugue de 3,5 mm do headset diretamente na entrada de 3,5 mm do controle do Xbox One™. * Se o seu controle do Xbox One ™ não tiver uma entrada de 3,5 mm você precisará do adaptador de headset estéreo Xbox One (vendido separadamente) que se conecta ao controle do Xbox One™ (figura abaixo). ™ * Utilizando com o Xbox One Documento No. 480HX-HSCRS001.
Uso (PS4™ e PS4™ Pro) com a Placa de som USB Para usar o headset com o PlayStation™ 4 (PS4™), conecte o plugue de 3,5 mm do headset à entrada de 3,5 mm da Palca de som USB e em seguida conecte o cabo USB à porta USB do PS4™. Assim que o dispositivo ‘HyperX Cloud Revolver S’ for detectado configure os Dispositivos de Áudio do PS4™ utilizando as etapas abaixo: ™ 1. Ligue seu console de jogos PS4 . 2. Navegue até o Menu de Configurações e selecione-o. 3. Destaque a opção do menu ‘Dispositivos’ e selecione-a.
Uso (PS4™ e PS4™ Pro) com conexão direta 3,5 mm Para usar o headset com o PlayStation™ 4 (PS4™), conecte o plugue de 3,5 mm do headset diretamente ao controle do PS4™ e siga as etapas a seguir: ™ 1. Ligue seu console de jogos PS4 . 2. Navegue até o Menu de Configurações e selecione-o. 3. Destaque a opção do menu ‘Dispositivos’ e selecione-a. 4. Role para baixo e selecione ‘Dispositivos de Áudio’. 5. Escolha ‘Saída para fones de ouvido’ e selecione ‘Todo o Áudio.’ Utilizando com o PS4 Documento No.
Uso (Wii U™) Para usar o headset com o Wii U™, conecte o plugue de 3,5 mm do headset diretamente ao controle do gamepad. Utilizando com o Wii U Documento No. 480HX-HSCRS001.
Uso (Dispositivo Móvel) Para usar o headset com um dispositivo móvel (ou outro dispositivo) que tenha uma entrada para headset (4 polos CTIA), conecte o plugue de 3,5 mm diretamente na entrada para headset do seu dispositivo. Utilizando com o dispositivo móvel (telefone, tablet ou notebook) Documento No. 480HX-HSCRS001.
Zestaw słuchawkowy HyperX Cloud Revolver S Numery katalogowe: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA Dokument nr 480HX-HSCRS001.
SPIS TREŚCI Wprowadzenie........................................................................................................................ 3 W zestawie ............................................................................................................................. 3 Cechy ..................................................................................................................................... 4 Dane techniczne.....................................................................
Wprowadzenie Dzięki technologii Plug N Play Virtual Dolby® Surround 7.1 zestaw słuchawkowy HyperX™ Cloud Revolver™ S jest gotowy do akcji od razu po rozpakowaniu. Nie potrzeba dodatkowego oprogramowania. Z kinową wyrazistością usłyszysz każdy krok, eksplozję i wystrzał, ponieważ symulacja siedmiu głośników precyzyjnie pozycjonujących dźwięk zapewnia doskonałe odwzorowanie odległości i głębi.
Cechy • Technologia audio Plug N Play Dolby® Surround 7.
Informacje ogólne A. Trwały pałąk ze stali B. Regulowany pałąk nagłowny C. Odłączany mikrofon z redukcją szumów D. Podłączony przewód z wtyczką 3,5 mm, 4 pola E. Moduł sterujący audio USB F. Przedłużacz do komputera Dokument nr 480HX-HSCRS001.
Obsługa modułu sterującego audio USB Cechy modułu sterowania audio USB: • • • • • Technologia audio Dolby® Surround 7.
Użytkowanie z modułem sterującym audio USB i komputerem PC/Mac Aby używać zestawu słuchawkowego z komputerem, należy włożyć wtyczkę 3,5 mm zestawu do gniazda 3,5 mm jack modułu sterującego audio USB, a następnie podłączyć przewód USB do komputera. Użytkowanie z modułem sterującym audio USB Dokument nr 480HX-HSCRS001.
Konfiguracja do pracy z modułem sterującym audio USB (Windows) Aby zapewnić najlepszą jakość dźwięku przestrzennego (surround), należy skonfigurować system Windows w sposób opisany poniżej. 1. Kliknij ikonę głośnika w zasobniku zadań prawym przyciskiem myszy i wybierz opcję „Urządzenia do odtwarzania”. 2. Następnie kliknij prawym przyciskiem myszy pozycję „HyperX Cloud Revolver S” i wybierz polecenie „Ustaw jako urządzenie domyślne”. Dokument nr 480HX-HSCRS001.
3. Nie usuwając zaznaczenia pozycji „HyperX Cloud Revolver S”, kliknij przycisk „Konfiguruj”. 4. Na liście „Kanały audio” wybierz „7.1 Surround” i kliknij przycisk „Dalej”. 5. Na liście „Głośniki opcjonalne” potwierdź zaznaczenie wszystkich pól wyboru i kliknij „Dalej”. 6. Na liście „Głośniki pełnozakresowe” potwierdź zaznaczenie wszystkich pól wyboru i kliknij „Dalej”. 7. Kliknij polecenie „Zakończ”, aby zapisać ustawienia. Dokument nr 480HX-HSCRS001.
8. Kliknij kartę „Nagrywanie”, następnie kliknij prawym przyciskiem myszy pozycję „HyperX Cloud Revolver S” i wybierz polecenie „Ustaw jako urządzenie domyślne”. Zestaw HyperX Cloud Revolver S został skonfigurowany i jest gotowy do pracy. Dokument nr 480HX-HSCRS001.
Konfiguracja do pracy z modułem sterującym audio USB (Mac) Aby zapewnić najlepszą jakość dźwięku przestrzennego (surround), należy skonfigurować komputer Mac w sposób opisany poniżej . 1. Otwórz menu Apple i wybierz pozycję „Preferencje systemowe”. 2. W oknie „Preferencje systemowe” kliknij pozycję „Dźwięk”. Dokument nr 480HX-HSCRS001.
3. Wybierz kartę „Wyjście” i zaznacz pozycję „HyperX Cloud Revolver S”. 4. Wybierz kartę „Wejście” i zaznacz pozycję „HyperX Cloud Revolver S”. Dokument nr 480HX-HSCRS001.
5. Otwórz program Finder, a następnie wybierz Aplikacje > Narzędzia > Konfiguracja MIDI Audio. 6. Zaznacz pozycję „HyperX Cloud Revolver S”, a następnie wybierz kartę „Wyjście”. 7. Kliknij listę rozwijaną „Format” i wybierz parametr „8-kan 16-bit. Całkowita 44.1 kHz”. 8. Kliknij polecenie „Skonfiguruj głośniki”. Dokument nr 480HX-HSCRS001.
9. Kliknij listę rozwijaną „Konfiguracja” i wybierz parametr „7.1 Surround”. 10. Kliknij przycisk Zastosuj. Zestaw HyperX Cloud Revolver S został skonfigurowany i jest gotowy do pracy. Dokument nr 480HX-HSCRS001.
Użytkowanie zestawu z przedłużaczem do komputera Aby podłączyć zestaw słuchawkowy do komputera (lub innego urządzenia) wyposażonego w gniazda słuchawek i mikrofonu typu jack, włóż wtyk 3,5 mm zestawu do gniazda 3,5 mm jack przedłużacza do komputera. Przedłużacz do komputera posiada dwa wtyki 3,5 mm. Wtyk słuchawek z zielonymi paskami pasuje do portu w kolorze zielonym lub oznaczonego symbolem słuchawek .
Użytkowanie zestawu z konsolą Xbox One™ i Xbox One S™ Aby używać zestawu słuchawkowego z konsolą Xbox One™, należy podłączyć wtyk 3,5 mm zestawu słuchawkowego bezpośrednio do gniazda jack 3,5 mm w kontrolerze konsoli Xbox One™. * Jeśli kontroler konsoli Xbox One ™ nie posiada gniazda jack 3,5 mm, konieczne jest zastosowanie adaptera stereo kontrolera konsoli Xbox One™ (sprzedawanego oddzielnie). Adapter podłącza się do kontrolera konsoli Xbox One™ (patrz niżej).
™ Użytkowanie z modułem sterującym audio USB i konsolą PS4 i PS4™ Pro Aby używać zestawu słuchawkowego z konsolą PlayStation™ 4 (PS4™), należy włożyć wtyczkę 3,5 mm zestawu do gniazda 3,5 mm jack modułu sterującego audio USB, a następnie podłączyć przewód USB do portu USB konsoli PS4™. Po wykryciu zestawu słuchawkowego HyperX Cloud Revolver S należy skonfigurować urządzenia audio podłączone do konsoli PS4™ w sposób opisany poniżej. ™ 1. Włącz konsolę PS4 . 2. Przejdź do menu Ustawienia i otwórz je. 3.
Połączenie bezpośrednie 3,5 mm z konsolą ™PS4 i PS4™ Pro Aby używać zestawu słuchawkowego z konsolą PlayStation ™4 (PS4™), należy podłączyć wtyczkę 3,5 mm zestawu słuchawkowego bezpośrednio do kontrolera konsoli PS4™ i wykonać poniższe czynności: ™ 1. Włącz konsolę PS4 . 2. Przejdź do menu Ustawienia i otwórz je. 3. W menu przejdź do opcji ‘Urządzenia’ i wybierz ją. 4. Przewiń w dół do pozycji ‘Urządzenia audio’ i wybierz ją. 5. Wybierz opcję ‘Wyjście na słuchawki’, a następnie pozycję ‘Całość dźwięku’.
™ Użytkowanie zestawu z konsolą Wii U Aby używać zestawu słuchawkowego z konsolą Wii U™, należy podłączyć wtyczkę 3,5 mm zestawu słuchawkowego bezpośrednio do kontrolera konsoli Wii U™. ™ Użytkowanie zestawu z konsolą Wii U Dokument nr 480HX-HSCRS001.
Użytkowanie zestawu z urządzeniami mobilnymi Aby używać zestawu słuchawkowego z urządzeniem mobilnym (lub innym urządzeniem) posiadającym gniazdo jack typu CTIA (4 pola), należy podłączyć wtyk 3,5 mm bezpośrednio do gniazda jack urządzenia. Użytkowanie zestawu z urządzeniami mobilnymi (telefonami, tabletami lub notebookami) Dokument nr 480HX-HSCRS001.
Гарнитура HyperX Cloud Revolver S Номера по каталогу: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA Документ № 480HX-HSCRS001.
СОДЕРЖАНИЕ Введение ............................................................................................................................... 3 Комплект поставки ................................................................................................................ 3 Характеристики ..................................................................................................................... 4 Технические спецификации .....................................................................
Введение Гарнитура HyperX™ Cloud Revolver S поддерживает функцию автоматической настройки конфигурации виртуального звука Dolby® Surround 7.1. Дополнительное программное обеспечение не требуется. Вы услышите каждый шаг, взрыв и выстрел с кинематографической четкостью с помощью 7 виртуальных динамиков, создающих точный звук с невероятным чувством расстояния и глубины. Благодаря передовой звуковой USB-карте обеспечивается неизменно высокое качество звука, какую бы систему вы ни использовали.
Характеристики • Технология автоматической настройки звука Dolby® Surround 7.
Обзор A. Прочная стальная конструкция B. Подвесное оголовье C. Съемный микрофон с шумоподавлением D. Прилагаемый кабель с 4-полюсным штекером 3,5 мм E. USB-блок управления звуком F. Удлинительный кабель ПК Документ № 480HX-HSCRS001.
Работа USB-блока управления звуком USB-блок управления звуком обладает следующими характеристиками: • • • • • Технология звука Dolby® Surround 7.
Использование с USB-блоком управления звуком (ПК/Mac) Для использования гарнитуры со своим компьютером подключите штекер гарнитуры 3,5 мм к гнездовому разъему 3,5 мм на USB-блоке управления звуком, а затем вставьте USB-кабель в свой компьютер. Использование с USB-блоком управления звуком Документ № 480HX-HSCRS001.
Настройка конфигурации с USB-блоком управления звуком (Windows) Для обеспечения оптимального качества объемного звука настройте Windows, выполнив следующие действия. 1. Щелкните правой кнопкой мыши по значку динамика на панели задач и выберите « Playback Devices » (Устройства воспроизведения). 2. Щелкните правой кнопкой мыши по пункту « HyperX Cloud Revolver S » и выберите « Set as Default Device » (Выбрать в качестве устройства по умолчанию). Документ № 480HX-HSCRS001.
3. Когда выбран пункт « HyperX Cloud Revolver S », щелкните кнопку « Configure » (Настроить конфигурацию). 4. В списке « Audio channels » (Аудиоканалы) выберите 7.1 Surround и щелкните « Next » (Далее). 5. В списке « Optional speakers » (Опциональные динамики) обязательно отметьте все флажки и щелкните « Next » (Далее). 6. В списке « Full-range speakers » (Широкополосные динамики) обязательно отметьте все флажки и щелкните « Next » (Далее). 7. Щелкните « Finish » (Готово), чтобы сохранить настройки.
8. Затем выберите вкладку « Recording » (Запись), щелкните правой кнопкой мыши по пункту « HyperX Cloud Revolver S » и выберите Set as Default Device (Выбрать в качестве устройства по умолчанию). Теперь ваша гарнитура HyperX Cloud Revolver S готова к использованию. Документ № 480HX-HSCRS001.
Настройка конфигурации с USB-блоком управления звуком (Mac) Для обеспечения оптимального качества объемного звука настройте Mac, выполнив следующие действия. 1. Войдите в меню Apple и выберите « System Preferences » (Системные настройки). 2. В « System Preferences » (Системные настройки) щелкните « Sound » (Звук). Документ № 480HX-HSCRS001.
3. Выберите выходное устройство, а затем « HyperX Cloud Revolver S ». 4. Выберите входное устройство, а затем « HyperX Cloud Revolver S ». Документ № 480HX-HSCRS001.
5. Откройте Finder, а затем выберите Applications (Приложения) > Utilities (Утилиты) > Audio MIDI Setup (Настройка Audio MIDI). 6. Выберите « HyperX Cloud Revolver S », а затем « Output » (Выход). 7. Щелкните выпадающий список « Format » (Формат) и выберите « 8 ch 16-bit Integer 44.1 kHz ». 8. Щелкните « Configure Speakers » (Настроить конфигурацию динамиков). Документ № 480HX-HSCRS001.
9. Щелкните выпадающий список « Configuration » (Конфигурация) и выберите 7.1 Surround. 10. Щелкните « Apply » (Применить). Теперь ваша гарнитура HyperX Cloud Revolver S готова к использованию. Документ № 480HX-HSCRS001.
Использование (ПК) с удлинительным кабелем ПК Для подключения гарнитуры непосредственно к компьютеру (или другому устройству), имеющему и разъем гарнитуры, и разъем микрофона, подключите штекер 3,5 мм гарнитуры к гнездовому разъему 3,5 мм на удлинительном кабеле ПК. Удлинительный кабель ПК имеет два штекера 3,5 мм. Штекер наушников с зелеными полосками вставляется в порт, обозначенный зеленым входом или символом наушников .
Использование (Xbox One™ и Xbox One S™) Для использования гарнитуры с Xbox One™ подсоедините штекер 3,5 мм на гарнитуре непосредственно к разъему 3,5 мм на контроллере Xbox One™. * Если ваш контроллер Xbox One ™ не имеет разъема 3,5 мм, вам потребуется гарнитурный стереоадаптер Xbox One (продается отдельно), который вставляется в контроллер Xbox One™ (см. рис. ниже). ™ * Использование с Xbox One Документ № 480HX-HSCRS001.
Использование (PS4™ и PS4™ Pro) с USB-блоком управления звуком Для использования гарнитуры с PlayStation™ 4 (PS4™) подключите штекер 3,5 мм на гарнитуре к гнездовому разъему 3,5 мм на USB-блоке управления звуком, а затем USB-кабель к USB-порту PS4™. После обнаружения устройства ‘HyperX Cloud Revolver S настройте конфигурацию Аудиоустройства PS4™, выполнив следующие действия: 1. Включите свою игровую консоль PS4™. 2. Перейдите к Меню настроек и выберите его. 3.
Использование (PS4™ и PS4™ Pro) с прямым соединением 3,5 мм Для использования гарнитуры с PlayStation™ 4 (PS4™) подключите штекер 3,5 мм на гарнитуре непосредственно к игровому контроллеру PS4™ и выполните следующие действия: ™ 1. Включите свою игровую консоль PS4 . 2. Перейдите к Меню настроек и выберите его. 3. Наведите курсор на меню « Devices » (Устройства) и выберите его. 4. Прокрутите до раздела « Audio Devices » (Аудиоустройства) и выберите его. 5.
Использование (Wii U™) Для использования гарнитуры с Wii U™ подсоедините штекер 3,5 мм на гарнитуре непосредственно к игровому контроллеру Wii U™. ™ Использование с Wii U Документ № 480HX-HSCRS001.
Использование (мобильное устройство) Для использования гарнитуры с мобильным или другим устройством со штекером гарнитуры (4-пол. CTIA) подключите штекер 3,5 мм непосредственно к разъему гарнитуры на своем устройстве. Использование с мобильным устройством (телефоном, планшетом или ноутбуком) Документ № 480HX-HSCRS001.
HyperX Cloud Revolver S Kulaklık Parça Numaraları: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA Document No. 480HX-HSCRS001.
İÇINDEKILER Giriş ........................................................................................................................................ 3 Paketin içindekiler .................................................................................................................. 3 Özellikler ................................................................................................................................ 4 Teknik Özellikler ..........................................................
Giriş HyperX™ Cloud Revolver S, Tak-Çalıştır sanal Dolby® Surround 7.1 ses ile çalışmaya hazır durumdadır. Herhangi bir yazılım gerektirmez. Yedi simüle konumsal hoparlörün sunduğu mesafe ve derinlik özelliğine sahip hassas ses sayesinde tüm ayak seslerini, patlama ve silah seslerini sinema berraklığında duyun. Gelişmiş USB DSP ses kartı her türlü ses sinyalini işleyerek, hangi sistemde oyun oynarsanız oynayın birinci sınıf, kararlı ses kalitesi sunar.
Özellikler • Tak-Çalıştır Dolby® Surround 7.1 ses teknolojisi • DSP Ses Kartı ile Gelişmiş USB Ses Kontrol Kutusu • Stüdyo sınıfı ses kalitesi • HyperX imzalı hafızalı köpük • Maksimum Konfor için Geniş Kafa Bandı Teknik Özellikler Kulaklık • Sürücü: Dinamik, neodim mıknatıslarla birlikte 50 mm • Tip: Çevresel, Geri dönüş kapalı • Frekans Yanıtı: 12 Hz–28.000 Hz • Empedans: 30 Ω • Ses basınç seviyesi: 100,5 dBS PL/mW, 1 kHz frekansta • T.H.D.
Genel Özellikler A. Sağlam Çelik Kasa B. Askılı kafa bandı C. Çıkarılabilir gürültü önleyici mikrofon D. Bağlı kablo, 4 kutuplu 3,5 mm fiş ile birlikte E. USB Ses kontrol kutusu F. PC uzatma kablosu Document No. 480HX-HSCRS001.
USB Ses Kontrol Kutusu - kullanım USB Ses Kontrol Kutusu aşağıdaki özelliklere sahiptir: • • • • • Dolby® Surround 7.1 ses teknolojisi 3 ön ayarlı ekolayzır modu Mikrofon Sessize Alma Özelliği Kulaklık ses seviyesi ayarı Mikrofon ses seviyesi ayarı Vokal Ekolayzır LED'i Düz Ekolayzır LED'i Bas Artırma Ekolayzır LED'i Kulaklık Ses seviyesi Ekolayzır Düğmesi Ekolayzır modları arasında geçiş yapmak için basın Dolby® Surround 7.
USB Ses Kontrol Kutusu ile Kullanım (PC/Mac) Kulaklığı bilgisayarınızda kullanmak için, kulaklığın 3,5 mm fişini USB Ses Kontrol Kutusundaki 3,5 mm dişi jaka bağlayın ve ardından USB kablosunu bilgisayarınıza takın. USB Ses Kontrol Kutusu ile Kullanma Document No. 480HX-HSCRS001.
USB Ses Kontrol Kutusu ile Yapılandırma (Windows) Optimum surround ses performansı için, aşağıdaki adımları uygulayarak Windows'u yapılandırın. 1. Görev tepsisinde hoparlör simgesine sağ tıklayın ve ‘Kayıttan Yürütme Aygıtları’nı seçin. 2. ‘HyperX Cloud Revolver S’e sağ tıklayın ve ‘Varsayılan Aygıt Olarak Ayarla’yı seçin. Document No. 480HX-HSCRS001.
3. ‘HyperX Cloud Revolver S’ seçildikten sonra, ‘Yapılandır’ düğmesine tıklayın. 4. ‘Ses kanalları’ listesinde, 7.1 Surround'u seçin ve ‘İleri’ye tıklayın. 5. ‘İsteğe bağlı hoparlörler’ listesinde, tüm kutuların işaretlendiğinden emin olun ve ‘İleri’ye tıklayın. 6. ‘Tam aralıklı hoparlörler’ listesinde, tüm kutuların işaretlendiğinden emin olun ve ‘İleri’ye tıklayın. 7. Ayarları kaydetmek için ‘Son’a tıklayın. Document No. 480HX-HSCRS001.
8. ‘Kayıt’ sekmesine tıklayın, ardından ‘HyperX Cloud Revolver S’e tıklayın ve ‘Varsayılan Aygıt Olarak Ayarla’yı seçin. HyperX Cloud Revolver S şimdi kullanıma hazır. Document No. 480HX-HSCRS001.
USB Ses Kontrol Kutusu ile Yapılandırma (Mac) Optimum surround ses performansı için, aşağıdaki adımları uygulayarak Mac'i yapılandırın. 1. Apple menüsüne tıklayın, ardından ‘Sistem Tercihleri’ni seçin. 2. ‘Sistem Tercihleri’nde ‘Ses’e tıklayın. Document No. 480HX-HSCRS001.
3. Çıkışı ve ardından ‘HyperX Cloud Revolver S’i seçin. 4. Girişi ve ardından ‘HyperX Cloud Revolver S’i seçin. Document No. 480HX-HSCRS001.
5. Bulma aracını açın ve Uygulamalar > Yardımcı Programlar > Ses MIDI Kurulumu'nu seçin. 6. ‘HyperX Cloud Revolver S’i ve ardından Çıkışı seçin. 7. ‘Format’ açılır penceresine tıklayın ve ‘8 ch 16-bit Integer 44.1 kHz’i seçin. 8. ‘Hoparlörleri Yapılandır’a tıklayın. Document No. 480HX-HSCRS001.
9. ‘Yapılandırma’ açılır penceresine tıklayın ve 7.1 Surround'u seçin. 10. Uygula'ya tıklayın. HyperX Cloud Revolver S şimdi kullanıma hazır. Document No. 480HX-HSCRS001.
PC uzatma kablosu (PC) ile kullanım Kulaklığı doğrudan hem bir kulaklık jakı hem de bir mikrofon jakı bulunan bilgisayarınıza (veya diğer aygıtlara) bağlamak için, kulaklığın 3,5 mm fişini PC uzatma kablosundaki 3,5 mm dişi jaka takın. PC uzatma kablosunda iki adet 3,5 mm jak bulunur. Yeşil şeritli kulaklık fişi, yeşil renkli girişi veya kulaklık sembolü bulunan bağlantı noktasına takılır .
Kullanım (Xbox One™ ve Xbox One S™) Kulaklığı Xbox One™ ile kullanmak için, kulaklıktaki 3,5 mm fişi doğrudan Xbox One™ kontrolörü üzerindeki 3,5 mm jaka bağlayın *Stereo Xbox One kontrolöründe 3,5 mm jak bulunmuyorsa, Xbox One kontrolörüne uyumlu Xbox One Kulaklık adaptörü (ayrı satılır) gerekecektir (aşağıdaki resimde gösterildiği gibi). ™ ™ ™ * Xbox One Document No. 480HX-HSCRS001.
USB Ses Kontrol Kutusu (PS4™ ve PS4™ Pro) ile kullanım Kulaklığı PlayStation™ 4 (PS4™) ile kullanmak için, kulaklığın 3,5 mm fişini USB ses kontrol kutusundaki 3,5 mm dişi jaka bağlayın ve ardından USB kablosunu PS4™ USB bağlantı noktasına takın. ‘HyperX Cloud Revolver S’ aygıtı algılandıktan sonra, aşağıdaki adımları uygulayarak PS4™ Ses Aygıtlarını yapılandırın: 1. PS4 ™ oyun konsolunuzu açın. 2. Ayarlar Menüsü'ne gidip bu menüyü seçin. 3. ‘Aygıtlar’ menü seçeneğini vurgulayıp bu seçeneği belirleyin.
™ Doğrudan 3,5 mm bağlantı (PS4 & PS4™ Pro) ile kullanım Kulaklığı PlayStation™ 4 (PS4™) ile kullanmak için, kulaklıktaki 3,5 mm fişi doğrudan PS4™ oyun kontrolörüne bağlayın ve şu adımları uygulayın: 1. PS4 ™ oyun konsolunuzu açın. 2. Ayarlar Menüsü'ne gidip bu menüyü seçin. 3. ‘Aygıtlar’ menü seçeneğini vurgulayıp bu seçeneği belirleyin. 4. ‘Ses Aygıtları’ öğesine inip bu öğeyi seçin. 5. ‘Kulaklık Çıkışı’nı ve ardından ‘Tüm Sesler’i seçin. PS4 Document No. 480HX-HSCRS001.
Kullanım (Wii U™) Kulaklığı Wii U™ ile kullanmak için, kulaklıktaki 3,5 mm fişi doğrudan Wii U™ oyun tablası kontrolüne bağlayın. Wii U Document No. 480HX-HSCRS001.
Kullanım (Mobil Cihaz) Kulaklığı, kulaklık jakı (4 kutuplu CTIA) bulunan bir mobil cihaz (veya diğer diğer cihazlar) ile kullanmak için, 3,5 mm fişi doğrudan cihazınızdaki kulaklık jakına takın. Mobil cihaz (telefon, tablet bilgisayar veya dizüstü bilgisayar) ile kullanım Document No. 480HX-HSCRS001.
HyperX Cloud Revolver S ヘッドセット 製品番号: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA ドキュメント番号 480HX-HSCRS001.
目次 製品説明 ................................................................................................................................. 3 製品内容 ................................................................................................................................. 3 特徴 ........................................................................................................................................ 4 製品仕様 ........................................................................................
製品説明 HyperX Cloud Revolver™ S は、接続するだけですぐに使用可能なプラグアンドプレイ式の ヘッドセットで、Dolby® 7.1ch バーチャルサラウンドに対応します。別途ソフトウェアを 導入する必要はありません。7 台のスピーカーのシミュレーションによって音源からの距離と 奥行きが正確に再生されるため、足音、爆発音、発砲音などのあらゆる音声が映画のように 鮮やかに聞こえます。進化した USB DSP サウンドカードがすべての信号を処理し、どんな システムで使用しても一定の高品質のサウンドを再生します。 製品内容 • • • • HyperX Cloud Revolver S ヘッドセ ット 取り外し可能なマイク USB オーディオ コントロールボッ クス PC 用延長ケーブル ドキュメント番号 480HX-HSCRS001.
特徴 • プラグアンドプレイ Dolby® 7.1ch サラウンドオーディオテクノロジー • DSP サウンドカードを内蔵し、進化した USB オーディオコントロールボックス • スタジオグレードのサウンドステージ • HyperX 独自の低反発クッション • 極上の快適性を追求したワイドヘッドバンド 製品仕様 ヘッドホン • ドライバー:ネオジム磁石、ダイナミック 50mm 径 • タイプ:サーカムオーラル、密閉型 • 周波数:12Hz~28,000 Hz • インピーダンス:30 Ω • 音圧レベル:100.5dBSPL/mW (1kHz 時) • T.H.D.:2%未満 • 入力電力:定格 30mW、最大 500mW • 重量:360g • 重量(マイク含む):376g • ケーブルの長さ: ヘッドセット (1m) USB オーディオコントロールボックス (2.2m) PC 用延長ケーブル (2m) • 接続方式: ヘッドセット - 3.
概要 A. 耐久性に優れたスチールフレーム B. サスペンションヘッドバンド C. 取り外し可能なノイズキャンセリングマ イク D. 付属ケーブル (4 極 3.5mm プラグ付き) E. USB オーディオコントロールボックス F. PC 用延長ケーブル ドキュメント番号 480HX-HSCRS001.
USB オーディオコントロールボックスの操作 USB オーディオコントロールボックスには以下の機能があります。 • • • • • Dolby® 7.1ch サラウンドオーディオテクノロジー 3 つのプリセットイコライザーモード マイクのミュート ヘッドホンの音量調節 マイクの音量調節 ボーカル EQ LED フラット EQ LED 低音ブースト EQ LED ヘッドホン 音量 イコライザーボタン 押すと EQ モードが順番に 切り替わります Dolby® 7.1ch サラウンドボタン LED オン - Dolby サラウンド有効 (イコライザー機能は 無効になります) LED オフ - Dolby サラウンド無効 マイク 音量 マイクミュートボタン LED オン - マイクミュート有効 LED オフ - マイク有効 USB オーディオコントロールボックスの使用 ドキュメント番号 480HX-HSCRS001.
USB オーディオコントロールボックスを PC/Mac で使用する場合 パソコンでヘッドセットを使用する場合は、ヘッドセットの 3.5mm プラグ(オス)を USB オーディオコントロールボックスの 3.5 ミリジャック(メス)に接続してから、USB ケーブルを パソコンに接続します。 USB オーディオコントロールボックスの使用 ドキュメント番号 480HX-HSCRS001.
USB オーディオコントロールボックスの設定(Windows の場合) サラウンドサウンドのパフォーマンスを最適化するには、以下の手順で Windows を設定します。 1. タスクトレーのスピーカー アイコンを右クリックし、 [再生デバイス]を選択します。 2. [HyperX Cloud Revolver S]を 右クリックし、[規定のデバイ スとして設定]を選択します。 ドキュメント番号 480HX-HSCRS001.
3. [HyperX Cloud Revolver S]が 選択された状態で、[構成] ボタンをクリックします。 4. [オーディオ チャンネル]リス トで[7.1 サラウンド]を選択し、 [次へ]をクリックします。 5. [オプション スピーカー]リス トで、すべてのボックスがオ ンになっていることを確認し てから[次へ]をクリックします。 6. [フルレンジ スピーカー]リス トで、すべてのボックスがオ ンになっていることを確認し てから[次へ]をクリックします。 7. [完了]をクリックして、設定を 保存します。 ドキュメント番号 480HX-HSCRS001.
8. [録音]タブをクリックしてから [HyperX Cloud Revolver S]を 右クリックし、[規定のデバイ スとして設定]を選択します。 これで、HyperX Cloud Revolver Sを 使用する準備が整いました。 ドキュメント番号 480HX-HSCRS001.
USB オーディオコントロールボックスの設定(Mac の場合) サラウンドサウンドのパフォーマンスを最適化するには、以下の手順で Mac を設定します。 1. Appleメニューをクリックして、 「システム環境設定」を選択 します。 2. 「システム環境設定」で「サ ウンド」をクリックします。 ドキュメント番号 480HX-HSCRS001.
3. 「出力」をクリックしてから、 「HyperX Cloud Revolver S」 を選択します。 4. 「入力」をクリックしてから、 「HyperX Cloud Revolver S」 を選択します。 ドキュメント番号 480HX-HSCRS001.
5. Finderを開き、「アプリ ケーション」、「ユーティリ ティ」、「Audio MIDI 設定」 の順にクリックします。 6. 「HyperX Cloud Revolver S」 を選択してから「出力」を 選択します。 7. 「フォーマット」のドロッ プダウンをクリックして 「44100.0Hz」、「8 ch 16 ビット整数」を選択します。 8. 「スピーカーを構成」を クリックします。 ドキュメント番号 480HX-HSCRS001.
9. 「構成」ドロップダウンを クリックし、「7.1 サラウン ド」を選択します。 10. 「適用」をクリックします。 これで、HyperX Cloud Revolver Sを 使用する準備が整いました。 ドキュメント番号 480HX-HSCRS001.
PC 延長ケーブルを PC で使用する場合 ヘッドセットを、ヘッドホンジャックとマイクジャックの両方があるコンピューター(または その他のデバイス)に接続するには、ヘッドセットの 3.5mm プラグ(オス)を PC 用延長ケーブ ルの 3.5mm ジャック(メス)に接続します。PC 用延長ケーブルには、2 つの 3.5mm プラグが あります。ヘッドホンプラグには緑色のラインが入っています。これを、緑色またはヘッドホ ンのマーク が付いたポートに差し込みます。延長ケーブルのマイクプラグにはピンク色の ラインが入っています。これを、ピンクまたはマイクのマーク が付いたポートに差し込み ます。 PC 用延長ケーブルを使用 ドキュメント番号 480HX-HSCRS001.
Xbox One™ と Xbox One S™を使用する場合 ヘッドセットを Xbox One™で使用するには、ヘッドセットの 3.5mm プラグを Xbox One™の コントローラーの 3.5mm ジャックに直接差し込みます。 * Xbox One のコントローラーに 3.5mm ジャックがない場合は、Xbox One のコントローラーに ™ ™ ™ Xbox One ステレオヘッドセットアダプター(別売)を差し込む必要があります(下図参照)。 * ™ Xbox One との接続 ドキュメント番号 480HX-HSCRS001.
USB オーディオコントロールボックスを PS4™ および PS4™ Pro で使用する場合 PlayStation™ 4 (PS4™)でヘッドセットを使用する場合は、ヘッドセットの 3.5mm プラグ (オ ス)を USB オーディオコントロールボックスの 3.5mm ジャック(メス)に接続してから、 USB ケーブルを PS4™ USB ポートに差し込みます。 [HyperX Cloud Revolver S]機器が検出されたら、以下の手順を使用して PS4™ のオーディオ 機器を設定します。 ™ 1. PS4 ゲーム機の電源を入れます。 2. [設定]メニューを選択します。 3. [周辺機器]メニューオプションを選択します。 4. [オーディオ機器]までスクロールダウンして、選択します。 5. [入力機器]を[HyperX Cloud Revolver S]に設定します。 6. [出力機器]を[HyperX Cloud Revolver S]に設定します。 7. [ヘッドホンへの出力]を選んでから、[すべての音声]を選択します。 PS4 との接続 ドキュメント番号 480HX-HSCRS001.
PS4™ と PS4™ Pro に直接 3.5mm プラグで接続する場合 ヘッドセットを PlayStation™ 4 (PS4™)で使用するには、ヘッドセットの 3.5mm プラグを PS4™ゲーム機のコントローラーに直接接続し、以下のように設定を行います。 ™ 1. PS4 ゲーム機の電源を入れます。 2. [設定]メニューを選択します。 3. [周辺機器]メニューオプションを選択します。 4. [オーディオ機器]までスクロールダウンして、選択します。 5. [ヘッドホンへの出力]を選んでから、[すべての音声]を選択します。 ™ PS4 との接続 ドキュメント番号 480HX-HSCRS001.
Wii U™で使用する場合 ヘッドセットを Wii U™で使用するには、ヘッドセットの 3.5mm ジャックを Wii U™ゲーム パッドコントローラーに直接接続します。 ™ Wii U との接続 ドキュメント番号 480HX-HSCRS001.
モバイルデバイスで使用する場合 ヘッドセットを、ヘッドセットジャック(4 極 CTIA)があるモバイルデバイス(またはその他の デバイス)で使用するには、3.5mm プラグを、ご使用のデバイスのヘッドセットジャックに 直接差し込みます。 モバイルデバイス(電話、タブレットまたはノート PC)との接続 ドキュメント番号 480HX-HSCRS001.
HyperX Cloud Revolver S 헤드셋 제품 번호: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA 문서번호 480HX-HSCRS001.
목차 소개 ........................................................................................................................................ 3 구성품 .................................................................................................................................... 3 특징 ........................................................................................................................................ 4 기술 사양 ................................................................................
소개 HyperX™ Cloud Revolver S 는 플러그 앤 플레이 버추얼 돌비® 서라운드 7.1 오디오의 지원이 가능합니다 - 별도의 소프트웨어는 필요하지 않습니다. 깊이 있고 정확한 사운드 제공이 검증된 7 방향의 스피커들을 통해 극장과 같은 현장감 넘치는 발소리, 폭발음, 총성 소리를 들으십시오. 향상된 USB DSP 사운드 카드는 모든 게임 시스템 사용에 일관된 프리미엄 사운드를 제공합니다. 구성품 • • • • HyperX Cloud Revolver S 헤드셋 탈착식 마이크 USB 오디오 제어 박스 PC 확장 케이블 문서번호 480HX-HSCRS001.
특징 • 플러그 앤 플레이 돌비® 서라운드 7.1 오디오 기술 • DSP 사운드 카드가 탑재되어 기능이 향상된 USB 오디오 제어 박스 • 스튜디오 수준의 사운드 구현 • 시그니처 HyperX 메모리 폼 • 최고의 편안함을 제공하는 와이드 헤드밴드 기술 사양 헤 드폰 • 드라이버: 다이나믹 50mm 네오디뮴 유닛 적용 • 유형: 밀폐형, 폐쇄형 뒷면 • 주파수 반응: 12Hz–28,000 Hz • 임피던스: 30 Ω • • • 음압레벨: 1kHz 에서 100.5dBSPL/mW T.H.D.: < 2% 입력 전력: 정격 용량 30mW, 최대 500mW • 무게: 360g • 무게 w/ mic: 376g • 케이블 길이: 헤드셋(1m) USB 오디오 제어 박스(2.2m) PC 확장 케이블(2m) • 연결: 헤드셋 - 3.5mm 플러그(4 극) USB 오디오 제어 박스 - USB PC 확장 케이블 - 3.
개요 A. 내구성이 좋은 철재 프레임 B. 편안한 헤드밴드 C. 분리형 잡음제거 마이크 D. 연결 케이블 w/ 4 극 3.5mm 플러그 E. USB 오디오 제어 박스 F. PC 확장 케이블 문서번호 480HX-HSCRS001.
USB 오디오 제어 박스 작동 USB 오디오 제어 박스는 다음과 같은 특징을 가지고 있습니다. • • • • • 돌비® 서라운드 7.1 오디오 기술 3 개의 프리셋 이퀄라이저 모드 마이크 음소거 헤드폰 볼륨 조절 마이크 볼륨 조절 보컬 EQ LED 플랫 EQ LED 베이스 부스트 EQ LED 헤드폰 볼륨 이퀄라이저 버튼 EQ 모드를 변경하려면 이 버튼을 누르십시오. 돌비® 서라운드 7.1 버튼 LED 켜짐 - 돌비 활성화 (이퀄라이저 기능은 비활성화됩니다.) LED 꺼짐 - 돌비 비활성화 마이크 볼륨 마이크 음소거 버튼 LED 켜짐 - 마이크 음소거 LED 꺼짐 - 마이크 작동 USB 오디오 제어 박스 사용 문서번호 480HX-HSCRS001.
USB 오디오 제어 박스 사용(PC/Mac) 컴퓨터에 헤드셋을 사용하려면, USB 오디오 제어 박스의 Female 타입 3.5mm 잭에 헤드셋의 3.5mm 플러그를 연결한 다음 컴퓨터에 USB 케이블을 연결합니다. USB 오디오 제어 박스 사용 문서번호 480HX-HSCRS001.
USB 오디오 제어 박스 구성(Windonws) 최적의 서라운드 사운드 성능 구현을 위해 아래의 단계에 따라 Windows 를 설정해야 합니다. 1. 태스크 트레이에서 스피커 아이콘을 우클릭한 다음 ‘Playback Devices’를 선택합니다. 2. ‘HyperX Cloud Revolver S’를 우클릭하고 ‘Set as Default Device’를 선택합니다. 문서번호 480HX-HSCRS001.
3. ‘HyperX Cloud Revolver S’를 선택한 상태에서 ‘Configure’ 버튼을 클릭합니다. 4. ‘Audio channels’ 목록에서 7.1 서라운드를 선택하고 ‘Next’를 클릭합니다. 5. ‘Optional speakers’ 목록에서 모든 상자가 체크되어 있는지 확인하고 ‘Next’를 클릭합니다. 6. ‘Full-range speakers’ 목록에서 모든 상자가 체크되어 있는지 확인하고 ‘Next’를 클릭합니다. 7. ‘Finish’을 클릭하여 설정을 저장합니다. 문서번호 480HX-HSCRS001.
8. ‘Recording’ 탭을 클릭하고 ‘HyperX Cloud Revolver S’을 우클릭한 다음 ‘Set as Default Device’을 선택합니다. 이제 HyperX Cloud Revolver S를 사용하실 수 있습니다. 문서번호 480HX-HSCRS001.
USB 오디오 제어 박스 구성(Mac) 최적의 서라운드 사운드 성능 구현을 위해 아래의 단계에 따라 Mac 을 설정해야 합니다. 1. Apple 메뉴를 클릭한 다음 ‘System Preferences’를 선택합니다. 2. ‘System Preferences’에서 ‘Sound’를 클릭합니다. 문서번호 480HX-HSCRS001.
3. 출력을 선택한 다음 ‘HyperX Cloud Revolver S’을 선택합니다. 4. 입력을 선택한 다음 ‘HyperX Cloud Revolver S’을 선택합니다. 문서번호 480HX-HSCRS001.
5. Finder를 연 다음 Applications > Utilities > Audio MIDI Setup을 선택합니다. 6. ‘HyperX Cloud Revolver S’를 선택한 다음 Output을 선택합니다. 7. ‘서브메뉴 Format’을 클릭하고 ‘8 ch 16-bit Integer 44.1 kHz’를 선택합니다. 8. ‘Configure Speakers’를 클릭합니다. 문서번호 480HX-HSCRS001.
9. ‘서브메뉴 Configuration’를 클릭하고 서라운드를 선택합니다. 10. Apply를 클릭합니다. 이제 HyperX Cloud Revolver S를 사용할 수 있습니다. 문서번호 480HX-HSCRS001.
PC 확장 케이블 사용(PC) 헤드셋을 헤드폰 잭과 마이크 잭이 모두 있는 컴퓨터(혹은 다른 장치)에 연결하려면 헤드셋의 3.5mm 플러그를 PC 확장 케이블의 Female 타입 3.5mm 잭에 연결해야 합니다. PC 확장 케이블에는 2 개의 3.5mm 플러그가 포함되어 있습니다. 녹색 줄무늬가 있는 헤드폰 플러그를 녹색 입력 단자나 헤드폰 표시 가 있는 포트에 연결합니다. 분홍색 줄무늬가 있는 확장 케이블 마이크 플러그를 분홍색 입력 단자나 마이크 표시 가 있는 포트에 연결합니다. PC 확장 케이블 사용 문서번호 480HX-HSCRS001.
사용(Xbox One™ & Xbox One S™) 헤드셋을 Xbox One™에 사용하려면, 헤드셋의 3.5mm 플러그를 Xbox One™ 컨트롤러의 3.5mm 잭에 직접 연결해야 합니다. * Xbox One ™ 컨트롤러에 3.5mm 잭이 없는 경우, Xbox One™ 스테레오 헤드셋 어댑터(별도 판매)가 필요하며 이를 통해 Xbox One™ 컨트롤러에 연결할 수 있습니다(아래 그림). * ™ Xbox One 에 사용 문서번호 480HX-HSCRS001.
USB 오디오 제어 박스 사용(PS4™ & PS4™ Pro) 헤드셋을 PlayStation™ 4(PS4™)에 사용하려면, 헤드셋의 3.5mm 플러그를 USB 오디오 제 어 박스의 Female 타입 3.5mm 잭에 연결한 다음 PS4™ USB 포트에 USB 케이블을 연결해 야 합니다. ‘HyperX Cloud Revolver S’ 장치가 감지되면 아래 단계에 따라 PS4™ 오디오 장치를 구성합니다: 1. PS4 ™ 게임 콘솔의 전원을 켭니다. 2. 설정 메뉴로 이동하여 선택합니다. 3. ‘Devices’ 메뉴 옵션을 선택합니다. 4. 스크롤을 내려 ‘Audio Devices’를 선택합니다. 5. ‘Input Device’를 HyperX Cloud Revolver S 로 설정합니다. 6. ‘Output Device’를 HyperX Cloud Revolver S 로 설정합니다. 7. ‘Output to Headphones’을 선택하고 ‘All Audio’를 선택합니다.
직접 3.5mm 연결 사용(PS4™ & PS4™ Pro) 헤드셋을 PlayStation™ 4(PS4™)와 사용하려면, 헤드셋의 3.5mm 플러그를 PS4™ 게 임 컨트롤러에 직접 연결하고 다음의 단계를 수행해야 합니다: 1. PS4 ™ 게임 콘솔의 전원을 켭니다. 2. 설정 메뉴로 이동하여 선택합니다. 3. ‘Devices’ 메뉴 옵션을 선택합니다. 4. 스크롤을 내려 ‘Audio Devices’를 선택합니다. 5. ‘Output to Headphones’을 선택하고 ‘All Audio’를 선택합니다. ™ PS4 에 사용 문서번호 480HX-HSCRS001.
사용 (Wii U™) 헤드셋을 Wii U™에 사용하려면, 헤드셋의 3.5mm 플러그를 Wii U™ 게임패드 컨트롤러에 직 접 연결해야 합니다. ™ Wii U 에 사용 문서번호 480HX-HSCRS001.
사용(모바일 장치) 헤드셋을 헤드셋 잭(4 극 CTIA)이 장착된 모바일 장치 (혹은 다른 장치)와 사용하려면, 3.5mm 플러그를 장치의 헤드셋 잭에 직접 연결해야 합니다. 모바일 장치와 함께 사용(핸드폰, 태블릿, 노트북) 문서번호 480HX-HSCRS001.
ชุดหูฟง ั HyperX Cloud Revolver S ิ้ สว่ น: HX-HSCRS-GM/AS เลขชน HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA เลขเอกสาร 480HX-HSCRS001.
สารบ ัญ เกริน ่ นํ า .................................................................................................................................... 3 สงิ่ ทีจ ่ ัดมาให ............................................................................................................................. ้ 3 คุณสมบัต ิ ................................................................................................................................. 4 รายละเอียดทางเทคนิค HyperX Cloud Revolver S .....................
เกริน ่ นํา HyperX™ Cloud Revolver S พร ้อมอวดศักยภาพในการรองรับระบบเสียง Dolby® Surround 7.
คุณสมบ ัต ิ • ี ง Plug N Play Dolby® Surround 7.1 เทคโนโลยีเสย • ี ง USB ระดับสูงพร ้อมการ์ดเสย ี ง DSP กล่องควบคุมระบบเสย • ี งระดับสตูดโิ อ คุณภาพเสย • ิ ธิเ์ ฉพาะของ HyperX วัสดุทําจากเมมโมรีโ่ ฟมลิขสท • แถบคาดศรี ษะกว ้างเป็ นพิเศษเพือ ่ ให ้สวมใสไ่ ด ้สบายทีส ่ ด ุ รายละเอียดทางเทคนิค เฮดโฟน • ไดร์เวอร์: 50 มม. แบบไดนามิคพร ้อมแม่เหล็กนีโอดีเนียม • ประเภท: แบบครอบเต็ม ปิ ดด ้านหลัง • ความถี:่ 12Hz-28,000 Hz • ความต ้านทาน: 30 Ω • ี ง: 100.5dBSPL/mW ที่ 1kHz ระดับแรงดันเสย • T.H.
ภาพรวม A. โครงเหล็กกล ้าทนทาน B. แถบครอบศรี ษะแบบห ้อยแขวน C. ั ญาณรบกวนแบบถอดแยกได ้ ไมค์ตัดสญ D. ี บ 3.5 มม. 4 ตอน สายต่อพร ้อมหัวเสย E. ี ง USB กล่องควบคุมเสย F. สายพ่วง PC เลขเอกสาร 480HX-HSCRS001.
การทํางานของกล่องควบคุมเสียง USB กล่องควบคุมเสียง USB มีคุณสมบัติการทํางานดังต่อไปนี้ • • • • • ี ง Dolby® Surround 7.1 เทคโนโลยีเสย โหมดอีควอไลเซอร์สําเร็จ 3 โหมด ี งไมโครโฟน ระบบปิ ดเสย ี งหูฟัง ระบบปรับระดับเสย ี งไมโครโฟน ระบบปรับระดับเสย ี งคน EQ LED เสย ี งแฟลต EQ LED เสย EQ LED บูสต์เบส เฮดโฟน ี ง ระด ับเสย ปุ่มอีควอไลเซอร์ กดเพือ ่ วนเลือกโหมด EQ ปุ่ม Dolby® Surround 7.
การใช้ก ับกล่องควบคุมเสียง USB (PC/Mac) ่ งรับ 3.5 มม. ใช ้ชุดหูฟั งกับคอมพิวเตอร์โดยต่อหัวเสียบ 3.5 มม. ของชุดหูฟั งเข ้ากับชอ ที่กล่องควบคุมเสียง USB จากนั้นเสียบสาย USB เข ้าทีค ่ อมพิวเตอร์ ของคุณ ี ง USB การใชง้ านก ับกล่องควบคุมเสย เลขเอกสาร 480HX-HSCRS001.
การใช้งานก ับกล่องควบคุมเสียง USB (Windows) เพือ ่ ให ้ระบบเสียงทํางานได ้เต็มประสิทธิภาพ ให ้กําหนดค่า Windows ดังต่อไปนี้ ่ าดงา 1. คลิกขวาทีไ่ อคอนลําโพงทีถ น จากนัน ้ เลือก ‘Playback Devices’ 2. คลิกขวาที่ ‘HyperX Cloud Revolver S’ จากนัน ้ เลือก ‘Set as Default Device’ เลขเอกสาร 480HX-HSCRS001.
3. ขณะเลือก ‘HyperX Cloud Revolver S’ ให ้คลิกทีป ่ ม ุ่ ‘Configure’ 4. จาก ‘Audio channels’ เลือก 7.1 Surround จากนัน ้ คลิกที่ ‘Next’ 5. จาก ‘Optional speakers’ ่ ง จะต ้องเลือกรายการทุกชอ จากนัน ้ คลิกที่ ‘Next’ 6. จาก ‘Full-range speakers’ ่ ง จะต ้องเลือกรายการทุกชอ จากนัน ้ คลิก ‘Next’ ่ บันทึกค่า 7. คลิก ‘Finish’ เพือ เลขเอกสาร 480HX-HSCRS001.
8. คลิกทีแ ่ ท็บ ‘Recording’ จากนัน ้ คลิกขวาที่ ‘HyperX Cloud Revolver S’ จากนัน ้ เลือก ‘Set as Default Device’ HyperX Cloud Revolver S ้ พร ้อมใชงานแล ้วในตอนนี้ เลขเอกสาร 480HX-HSCRS001.
การใช้งานก ับกล่องควบคุมเสียง USB (Mac) เพือ ่ ให ้ระบบเสียงทํางานได ้เต็มประสิทธิภาพ ให ้กําหนดค่า Mac ดังต่อไปนี้ 1. คลิกทีเ่ มนู Apple จากนัน ้ เลือก ‘System Preferences’ 2. จาก ‘System Preferences’ คลิกที่ ‘Sound’ เลขเอกสาร 480HX-HSCRS001.
ั ญาณขาออก 3. เลือกสญ จากนัน ้ เลือก ‘HyperX Cloud Revolver S’ ั ญาณขาเข ้า จากนัน 4. เลือกสญ ้ เลือก ‘HyperX Cloud Revolver S’ เลขเอกสาร 480HX-HSCRS001.
5. เปิ ด Finder จากนัน ้ เลือก Applications > Utilities > Audio MIDI Setup 6. เลือก ‘HyperX Cloud Revolver S’ จากนัน ้ เลือก Output 7. คลิกทีส ่ ว่ นแสดงรายการ ‘Format’ จากนัน ้ เลือก ‘8 ch 16-bit Integer 44.1 kHz’ 8. คลิกที่ ‘Configure Speakers’ เลขเอกสาร 480HX-HSCRS001.
9. คลิกทีส ่ ว่ นแสดงรายการ ‘Configuration’ จากนัน ้ เลือก 7.1 Surround 10. คลิก Apply HyperX Cloud Revolver S ้ พร ้อมใชงานแล ้วในตอนนี้ เลขเอกสาร 480HX-HSCRS001.
การใช้งาน (PC) ก ับสายพ่ วง PC ต่อชุดหูฟั งกับคอมพิวเตอร์ (หรืออุปกรณ์อื่น ๆ) ที่มีทงั้ หัวเสียบชุดหูฟั งและไมโครโฟนโดยต่อหัวเสียบ 3.5 มม. ของชุดหูฟั งไปที่ช่องรับหัวเสียบ 3.5 มม. ที่สายพ่วง PC สายพ่วง PC มีหัวเสียบ 3.5 มม. สองหัว หัวเสียบหูฟั งจะมีแถบสีเขียว ให เ้ สียบเข า้ ทีพ ่ อร์ตสัญญาณขาเข ้ าสีเขียวหรือในช่องที่มีรูปชุดหูฟั ง หัวเสียบสัญญาณไมโครโฟนสายพ่วงจะมีแถบสีชมพู ให เ้ สียบเข า้ ที่พอร์ตสัญญาณขาเข า้ สีชมพู หรือในช่องทีม ่ ีรูปไมโครโฟน ้ ายพ่วง PC การใชส เลขเอกสาร 480HX-HSCRS001.
การใช้งาน (Xbox One™ & Xbox One S™) ใช ช ้ ุดหูฟั งกับ Xbox One™ โดยต่อหัวเสียบ 3.5 มม. ที่ชุดหูฟั ที่ชุดควบคุม Xbox One™ โดยตรง * หากชุดควบคุม Xbox One งเข า้ กับช่องเสียบ 3.5 มม. ่ งเสย ี บ 3.5 ม. คุณจะต อ ้ ะแดปเตอร์ชด ของคุณไม่มช ี อ ้ งใช อ ุ หูฟังสเตอริโอสําหรับ ี บต่อกับชุดควบคุม Xbox One™ (ภาพด า้ นล่าง) Xbox One (จําหน่ายแยกต่างหาก) สําหรับเสย ™ ™ * การใชง้ านก ับ Xbox One™ เลขเอกสาร 480HX-HSCRS001.
การใช้งาน (PS4™ & PS4™ Pro) ก ับกล่องควบคุมเสียบ USB ใช ช ้ ุดหูฟั งกับ PlayStation™ 4 (PS4™) โดยต่อหัวเสียบ 3.5 มม. ของชุดหูฟั งเข ้ ากับช่องหัวเสียบ 3.5 มม. ที่กล่องควบคุมเสียง USB จากนั้นเสียบสาย USB เข า้ ที่พอร์ต USB ของ PS4™ หลังจากพบ ‘HyperX Cloud Revolver S’ ให ก ้ ําหนดค่า PS4™ Audio Devices โดยทําตามขัน ้ ตอนต่อไปนี้: 1. เปิ ดเครือ ่ ง PS4™ ของคุณ 2. ไปทีเ่ มนู Settings เพือ ่ เลือกรายการ 3. แรเงาเลือกตัวเลือกเมนู ‘Devices’ จากนัน ้ เลือกรายการ 4.
การใช้งาน (PS4™ & PS4™ Pro) ก ับห ัวเสียบตรง 3.5 มม. ใช ง้ านชุดหูฟั งกับ PlayStation™ 4 (PS4™) โดยต่อหัวเสียบ 3.5 มม. ทีชุดหูฟั PS4™ โดยตรงตามขัน ้ ตอนต่อไปนี้ งเข า้ กับเครื่อง 1. เปิ ดเครือ ่ ง PS4™ ของคุณ 2. ไปทีเ่ มนู Settings เพือ ่ เลือกรายการ 3. แรเงาเลือกตัวเลือกเมนู ‘Devices’ จากนัน ้ เลือกรายการ 4. ไล่รายการไปที่ ‘Audio Devices’ จากนัน ้ เลือกรายการ 5. เลือก ‘Output to Headphones’ จากนัน ้ เลือก ‘All Audio’ ้ ับ PS4™ การใชก เลขเอกสาร 480HX-HSCRS001.
การใช้งาน (Wii U™) ใช ง้ านชุดหูฟั งกับ Wii U™ โดยต่อหัวเสียบ 3.5 มม. ที่ชุดหูฟั งโดยตรงเข ้าทีช ่ ุดควบคุมเกม Wii U™ การใชง้ านก ับ Wii U™ เลขเอกสาร 480HX-HSCRS001.
การใช้งาน (อุปกรณ์พกพา) ใช ช ้ ุดหูฟั งกับอุปกรณ์พกพา (หรืออุปกรณ์อื่น) โดยใช ห ้ ัวเสียบชุดหูฟั 3.5 มม. โดยตรงเข ้ากับหัวเสียบชุดหูฟั งที่อุปกรณ์ของคุณ ง (4 ตอน CTIA) ขนาด ั การใชง้ านก ับอุปกรณ์พกพา (โทรศพท์ แท็บเล็ตหรือโน้ตบุก ๊ ) เลขเอกสาร 480HX-HSCRS001.
Tai nghe HyperX Cloud Revolver S Mã sản phẩm: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA Số tài liệu: 480HX-HSCRS001.
MỤC LỤC Giới thiệu ................................................................................................................................ 3 Bộ tai nghe gồm ..................................................................................................................... 3 Các tính năng ......................................................................................................................... 4 Thông số kỹ thuật ......................................................................
Giới thiệu HyperX™ Cloud Revolver S được thiết kế để sử dụng được ngay nhờ tính năng Cắm và Chạy, được trang bị hệ thống âm thanh Dolby® Surround 7.1 – không cần cài đặt phần mềm. Nghe rõ mọi bước chân, tiếng nổ và tiếng súng với chất lượng như ở rạp chiếu phim nhờ có bảy loa đa hướng mô phỏng, tạo ra âm thanh trong trẻo có độ sâu và độ lan tỏa. Card âm thanh USB DSP tiên tiến giúp xử lý mọi tạp âm nhằm tạo ra độ ổn định của chất lượng âm thanh đẳng cấp, hoạt động tốt trên mọi nền tảng.
Các tính năng • Công nghệ Cắm và Chạy cùng âm thanh Dolby® Surround 7.1 • Hộp điều khiển âm thanh USB tiên tiến cùng card âm thanh DSP • Âm thanh đẳng cấp phòng thu • Mút hoạt tính đặc trưng của HyperX • Dây đeo qua đầu rộng, mang lại cảm giác thoải mái tuyệt đối Thông số kỹ thuật Tai nghe • Màng loa: Động, 50mm có nam châm đất hiếm • Loại: Chụp đầu, Đóng kín • Đáp tuyến tần số: 12Hz-28.000 Hz • Trở kháng: 30 Ω • Mức áp suất âm: 100.5dBSPL/mW tại 1kHz • Tổng độ biến dạng sóng hài (T.H.
Khái quát A. Khung thép chắc chắn B. Dây đeo qua đầu C. Micrô khử nhiễu có thể tháo rời D. Cáp đi kèm với giắc cắm 3,5mm 4 chấu (1m) E. Hộp điều khiển âm thanh USB F. Cáp nối dài PC Số tài liệu: 480HX-HSCRS001.
Hoạt động của hộp điều khiển âm thanh USB Hộp điều khiển âm thanh USB có những đặc điểm sau: • • • • • Công nghệ âm thanh Dolby® Surround 7.1 3 chế độ cân bằng được định sẵn Tắt tiếng micrô Điều chỉnh âm lượng tai nghe Điều chỉnh âm lượng micrô Đèn LED của bộ cân bằng giọng nói Đèn LED của Bộ cân bằng âm bẹt Đèn LED của Bộ cân bằng tăng cường âm bass Tai nghe Âm lượng Nút cân bằng Nhấn để chuyển giữa các chế độ cân bằng Nút Dolby® Surround 7.
Sử dụng Hộp điều khiển âm thanh USB (PC/Mac) Để sử dụng tai nghe với máy tính, cắm giắc 3,5mm của tai nghe vào giắc cái 3,5mm trên Hộp điều khiển âm thanh USB rồi cắm cáp USB vào máy tính. Sử dụng với Hộp điều khiển âm thanh USB Số tài liệu: 480HX-HSCRS001.
Cấu hình bằng Hộp điều khiển âm thanh USB (Windows) Để có hiệu suất âm thanh vòm tối ưu, hãy cấu hình Windows theo các bước sau. 1. Nhấp chuột phải vào biểu tượng loa trên khay tác vụ và chọn ‘Playback Devices’ (Thiết bị phát lại). 2. Nhấp chuột phải vào ‘HyperX Cloud Revolver S’ và chọn ‘Set as Default Device’ (Đặt làm thiết bị mặc định). Số tài liệu: 480HX-HSCRS001.
3. Với ‘HyperX Cloud Revolver S’ được chọn, nhấp vào nút ‘Configure’ (Cấu hình). 4. Trong danh sách ‘Audio channels’ (Kênh âm thanh), chọn 7.1 và nhấp vào ‘Next’ (Tiếp). 5. Trong danh sách ‘Optional speakers’ (Loa tùy chọn), đảm bảo đã chọn tất cả các hộp rồi nhấp ‘Next’ (Tiếp). 6. Trong danh sách ‘Full-range speakers’ (Tất cả dải loa), đảm bảo đã chọn tất cả các hộp rồi nhấp ‘Next’ (Tiếp). 7. Nhấp ‘Finish’ (Hoàn tất) để lưu các cài đặt. Số tài liệu: 480HX-HSCRS001.
8. Nhấp vào tab ‘Recording’ (Ghi âm) rồi nhấp chuột phải vào ‘HyperX Cloud Revolver S’ và chọn ‘Set as Default Device’ (Đặt làm thiết bị mặc định). Tai nghe HyperX Cloud Revolver S đã sẵn sàng sử dụng. Số tài liệu: 480HX-HSCRS001.
Cấu hình bằng Hộp điều khiển âm thanh USB (Mac) Để có hiệu suất âm thanh vòm tối ưu, hãy cấu hình máy Mac theo các bước sau. 1. Nhấp vào menu Apple rồi chọn ‘System Preferences’ (Cấu hình hệ thống). 2. Trong ‘System Preferences’ (Cấu hình hệ thống) nhấp vào ‘Sound’ (Âm thanh). Số tài liệu: 480HX-HSCRS001.
3. Chọn đầu ra rồi chọn ‘HyperX Cloud Revolver S’. 4. Chọn đầu vào rồi chọn ‘HyperX Cloud Revolver S’. Số tài liệu: 480HX-HSCRS001.
5. Mở Finder (Tìm kiếm) rồi chọn Applications > Utilities > Audio MIDI Setup (Ứng dụng > Tiện ích > Cài đặt MIDI âm thanh). 6. Chọn ‘HyperX Cloud Revolver S’ rồi chọn Output (Đầu ra). 7. Nhấp vào danh sách thả xuống ‘Format’ (Định dạng) và chọn ‘8 ch 16-bit Integer 44.1 kHz’. 8. Nhấp ‘Configure Speakers’ (Cấu hình loa). Số tài liệu: 480HX-HSCRS001.
9. Nhấp vào danh sách thả xuống ‘Configuration’ (Cấu hình) và chọn 7.1 Surround. 10. Nhấp Apply (Áp dụng). Tai nghe HyperX Cloud Revolver S đã sẵn sàng sử dụng. Số tài liệu: 480HX-HSCRS001.
Sử dụng (PC) với cáp nối dài PC Để kết nối tai nghe với máy tính (hoặc thiết bị khác) có cả giắc tai nghe và giắc micrô, cắm giắc 3,5mm của tai nghe vào giắc cái 3.4mm trên cáp nối dài PC. Cáp nối dài PC có hai giắc 3,5mm. Giắc tai nghe, có dải dây màu xanh nhạt, cắm vào cổng vào màu xanh nhạt hoặc có biểu tượng tai nghe . Giắc micrô trên cáp nối dài, có dải dây màu hồng, cắm vào cổng màu hồng hoặc có biểu tượng micrô . Sử dụng với cáp nối dài PC Số tài liệu: 480HX-HSCRS001.
Sử dụng (Xbox One™ & Xbox One S™) Để sử dụng tai nghe với Xbox One™, cắm giắc 3,5mm trên tai nghe trực tiếp vào giắc 3,5mm trên bộ điều khiển Xbox One™. * Nếu bộ điều khiển Xbox One của bạn không có giắc 3,5mm bạn sẽ cần bộ chuyển đổi Tai nghe stereo cho Xbox One (được bán riêng) để cắm vào bộ điều khiển Xbox One (như hình bên dưới.) ™ ™ ™ * Sử dụng với Xbox One Số tài liệu: 480HX-HSCRS001.
Sử dụng (PS4™ & PS4™ Pro) với Hộp đi ều khiển âm thanh USB Để sử dụng tai nghe với PlayStation™ 4 (PS4™), cắm giắc 3,5mm của tai nghe vào giắc cái 3,5mm trên hộp điều khiển âm thanh USB rồi cắm cáp USB vào cổng PS4™ USB. Khi thiết bị ‘HyperX Cloud Revolver S’ được phát hiện, hãy cấu hình Thiết bị âm thanh của PS4™ theo các bước sau: ™ 1. Bật máy chơi game PS4 . 2. Điều hướng tới danh mục Setting (Cài đặt) và chọn. 3. Đánh dấu tùy chọn danh mục ‘Devices’ (Thiết bị) và chọn. 4.
Sử dụng (PS4™ & PS4™ Pro) với kết nối 3,5mm trực tiếp Để sử dụng tai nghe với PlayStation™ 4 (PS4™), cắm giắc 3,5mm trên tai nghe trực tiếp vào bộ điều khiển PS4™ và làm theo các bước sau: ™ 1. Bật máy chơi game PS4 . 2. Điều hướng tới danh mục Setting (Cài đặt) và chọn. 3. Đánh dấu tùy chọn menu ‘Devices’ (Thiết bị) và chọn. 4. Cuộn xuống ‘Audio Devices’ (Thiết bị âm thanh) và chọn. 5. Chọn ‘Output to Headphones (Đầu ra tai nghe)’ và chọn ‘All Audio (Tất cả âm thanh).
Sử dụng (Wii U™) Để sử dụng tai nghe với Wii U™, cắm giắc 3,5mm trên tai nghe trực tiếp vào bộ điều khiển tay chơiWii U™. Sử dụng với Wii U Số tài liệu: 480HX-HSCRS001.
Sử dụng (Thiết bị di động) Để sử dụng tai nghe với thiết bị di động (hoặc thiết bị khác) với giắc cắm tai nghe (4 cực CTIA), cắm giắc 3,5mm trực tiếp vào giắc tai nghe trên thiết bị của bạn. Sử dụng với thiết bị di động (điện thoại, máy tính bảng hoặc máy tính xách tay) Số tài liệu: 480HX-HSCRS001.
HyperX Cloud Revolver S 耳机 部件号: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA 文档编号 480HX-HSCRS001.
目录 介绍 ........................................................................................................................................ 3 包含内容 ................................................................................................................................. 3 产品特色 ................................................................................................................................. 4 技术规格 ........................................................................................
介绍 HyperX™ Cloud Revolver S 可以与即插即用的虚拟 Dolby® Surround 7.1 音频一起使用 — 无需 安装软件。每一个脚步声、每一个爆炸声、每一声枪响,都以电影般的效果为您清晰呈现,这一 切都源自模拟的 7 个定位扬声器,按照距离和深度制作出精准的音效。先进的 USB 数字信号处 理 (DSP) 声卡让一切变成可能,无论您使用何种系统,都能实现一致的优质音效。 包含内容 • • • • HyperX Cloud Revolver S 耳机 可拆卸式麦克风 USB 音频控制盒 PC 延长线 文档编号 480HX-HSCRS001.
产品特色 • 即插即用的 Dolby® Surround 7.1 音频技术 • 先进的 USB 音频控制盒与 DSP 声卡 • 工作室级别的音场 • 标志性 HyperX 记忆海绵 • 宽松的头带实现最大舒适度 技术规格 耳 机 • 驱动器:动态,50 毫米,含钕磁铁 • 类型:罩耳式,封闭式 • 频率响应:12Hz-28,000 Hz • 阻抗:30 Ω • 声压等级:1kHz 时 100dBSPL/mW • 总谐波失真 (T.H.D.):< 2% • 输入功率:额定 30mW,最大 500mW • 重量:360 克 • 重量(含麦克风):376 克 • 线缆长度: 耳机(1 米) USB 音频控制盒(2.2 米) PC 延长线(2 米) • 连接: 耳机 - 3.5 毫米插孔(4 极) USB 音频控制盒 – USB PC 延长线 - 3.
概述 A. 结实耐用的钢架 B. 悬挂头带 C. 可拆卸的降噪麦克风 D. 连接线,含 4 极 3.5mm 插孔 E. USB 音频控制盒 F. PC 延长线 文档编号 480HX-HSCRS001.
USB 音频控制盒操作 USB 音频控制盒具备以下特征: • • • • • Dolby® Surround 7.1 音频技术 3 种预先设置的均衡器模式 麦克风静音 耳机音量调整 麦克风音量调整 人声 EQ LED 平直 EQ LED 低音增强 EQ LED 耳机音量 均衡器按钮 按下以使用 EQ 模式循环播放 Dolby® Surround 7.1 按钮 LED 灯亮起 – 启用 Dolby (将禁用均衡器功能) LED 灯关闭 – 禁用 Dolby 麦克风音量 麦克风静音按钮 LED 开启 – 麦克风静音 LED 关闭 – 麦克风启用 使用 USB 音频控制盒 文档编号 480HX-HSCRS001.
使用 USB 音频控制盒 (PC/Mac) 要在电脑上使用耳机,请将耳机的 3.5 毫米插头连接到 USB 音频控制盒上的 3.5 毫米母座, 然后将 USB 线缆插入计算机。 使用 USB 音频控制盒 文档编号 480HX-HSCRS001.
配置 USB 音频控制盒 (Windows) 要获得最佳环绕立体声音效,请按照如下步骤配置 Windows。 1. 右键单击任务栏上的扬声器图 标,然后选择“播放设备”。 2. 右键单击“HyperX Cloud Revolver S”,然后选择 “设置为默认设备”。 文档编号 480HX-HSCRS001.
3. 选择“HyperX Cloud Revolver S”之后单击 “配置”按钮。 4. 在“音频通道”列表中,选择 7.1 环绕立体声,然后单击 “下一步”。 5. 在“可选的扬声器”列表中, 确保选中所有方框,然后单击 “下一步”。 6. 在“全频扬声器”列表中, 确保选中所有方框,然后 单击“下一步”。 7. 单击“完成”以保存设置。 文档编号 480HX-HSCRS001.
8. 单击“录音”选项卡,然后 右键单击“HyperX Cloud Revolver S”,并选择 “设置为默认设备”。 您的 HyperX Cloud Revolver S 现在 可以使用。 文档编号 480HX-HSCRS001.
配置 USB 音频控制盒 (Mac) 要获得最佳环绕立体声音效,请按照如下步骤配置 Mac。 1. 单击“Apple”菜单,选择 “系统偏好设置”。 2. 在“系统偏好设置”中,单击 “音效”。 文档编号 480HX-HSCRS001.
3. 选择“输出”,然后选择 “HyperX Cloud Revolver S”。 4. 选择“输入”,然后选择 “HyperX Cloud Revolver S”。 文档编号 480HX-HSCRS001.
5. 打开查找器,然后选择“应用 程序” > “实用程序” > “音频 MIDI 设置”。 6. 选择“HyperX Cloud Revolver S”,然后选择“输出”。 7. 单击“格式”下拉菜单, 然后选择“8-ch 16-bit Integer 44.1 kHz”。 8. 单击“配置扬声器”。 文档编号 480HX-HSCRS001.
9. 单击“配置”下拉菜单,选择 “7.1 环绕立体声”。 10. 单击“应用”。 您的 HyperX Cloud Revolver S 现在 可以使用。 文档编号 480HX-HSCRS001.
使用 (PC) 延长线 要将耳机连接到有耳机插孔和麦克风架的计算机(或其他设备),请将耳机的 3.5 毫米插孔连接 到 PC 延长线的 3.5 毫米母座。PC 延长线有两个 3.5 毫米插孔。带有绿色条纹的耳机插孔插入 由绿色输入或耳机符号 表示的端口。带有粉色条纹的延长线麦克风插孔插入由粉色输入或麦 克风符号 表示的端口。 与 PC 延长线一起使用 文档编号 480HX-HSCRS001.
使用(Xbox One™ 与 Xbox One S™) 要将耳机与 Xbox One™ 一起使用,请将耳机上的 3.5 毫米插孔直接连接到 Xbox One™ 控制器的 3.5 毫米插座 * 如果您的 Xbox One ™ 控制器没有 3.5 毫米插座,则需要可以插入到 Xbox One Xbox One ™ 立体声耳机适配器(单独出售)(如下图所示)。 ™ 控制器的 * ™ 与 Xbox One 文档编号 480HX-HSCRS001.
使用(PS4™ 与 PS4™ Pro)USB 音频控制盒 要在 PlayStation™ 4 (PS4™) 上使用耳机,请将耳机的 3.5 毫米插孔连接到 USB 音频控制盒 上的 3.5 毫米母座,然后将 USB 线缆插入 PS4™ USB 端口。 检测到“HyperX Cloud Revolver S”设备后,按照如下步骤配置 PS4™ 音频设备: ™ 1. 启动您的 PS4 游戏机。 2. 导航至“设置”菜单,并将其选中。 3. 高亮显示“设备”菜单选项,并将其选中。 4. 向下滚动至“音频设备”并将其选中。 5. 将“输入设备”设置为 HyperX Cloud Revolver S。 6. 将“输出设备”设置为 HyperX Cloud Revolver S。 7. 选择“输出至耳机”并选择“所有音频”。 与 PS4 文档编号 480HX-HSCRS001.
使用(PS4™ 与 PS4™ Pro)3.5 毫米直接连接 要将耳机与 PlayStation™ 4 (PS4™)一起使用,请将耳机上的 3.5mm 插孔直接连接到 PS4™ 游戏控制器,操作步骤如下: ™ 1. 启动您的 PS4 游戏机。 2. 导航至“设置”菜单,并将其选中。 3. 高亮显示“设备”菜单选项,并将其选中。 4. 向下滚动至“音频设备”并将其选中。 5. 选择“输出至耳机”并选择“所有音频”。 与 PS4 文档编号 480HX-HSCRS001.
使用 (Wii U™) 要将耳机与 Wii U™ 一起使用,请将耳机上的 3.5mm 插孔直接连接到 Wii U™ 游戏手柄控制器。 与 Wii U 文档编号 480HX-HSCRS001.
使用(移动设备) 要将耳机与带有耳机插座(4 极 CTIA)的移动设备(或其他设备)一起使用,请将 3.5 毫米 插孔直接连接到设备的耳机插座。 与移动设备(手机或平板电脑或笔记本电脑)一起使用 文档编号 480HX-HSCRS001.
HyperX Cloud Revolver S 耳機 產品型號: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA 文件號碼:480HX-HSCRS001.
目錄 簡介 ........................................................................................................................................ 3 內容物 .................................................................................................................................... 3 產品特色 ................................................................................................................................. 4 技術規格 ......................................................................................
簡介 HyperX™ Cloud Revolver S 支援隨插即用的杜比 7.1 聲道虛擬環繞音效-無須安裝任何軟體。 模擬 7 個位置的揚聲器可以提供精確的聲音距離和深度,以劇院級的清晰音質,聆聽每個腳步 聲、爆破和槍砲聲。高階 USB DSP 音效卡能適用於各種環境,不論你在任何系統上遊戲都能享 受一致的頂級音質。 內容物 • • • • HyperX Cloud Revolver S 耳機 可拆式麥克風 USB 音量控制器 PC 延長線 文件號碼:480HX-HSCRS001.
產品特色 • 隨插即用杜比 7.1 環繞音效技術 • 高階 USB 音量控制器含 DSP 音效卡 • 錄音室等級音場 • HyperX 特製記憶泡棉 • 具備最佳舒適感受的加寬頭帶 技術規格 耳機 • 驅動單體:動態 50mm(釹磁鐵) • 類型:封閉式耳罩 • 頻率響應:12Hz-28,000 Hz • 阻抗:30 Ω • 聲壓級:100.5dBSPL/mW 於 1kHz • T.H.D.:< 2% • 輸入功率:額定 30mW,最高 500mW • 重量:360g • 重量(含麥克風):376g • 線長: 耳機(1 公尺) USB 音量控制器(2.2 公尺) PC 延長線(2 公尺) • 連接: 耳機-3.5mm 接頭 (4 段式) USB 音量控制器-USB 電腦延長線-3.5mm 立體聲和麥克風接頭 麥克風 • 元件:駐極體電容式麥克風 • 指向性型式:單向,降噪 • 頻率響應:50Hz-18,000 Hz • 感度:-40dBV (0dB=1V/Pa,1kHz) 文件號碼:480HX-HSCRS001.
概覽 A. 堅固鋼架結構 B. 懸掛頭帶 C. 可拆式降噪麥克風 D. 連接線配備 3.5mm 4 段式接頭 E. USB 音量控制器 F. PC 延長線 文件號碼:480HX-HSCRS001.
USB 音量控制器操作 USB 音量控制器有以下功能: • • • • • 杜比 7.1 環繞音效技術 3 組預設等化器模式 麥克風靜音 耳機音量調整 麥克風音量調整 人聲等化器 LED 燈 平直等化器 LED 燈 重低音等化器 LED 燈 耳機 音量 等化器按鈕 按下進入等化器模式 杜比 7.1 環繞音效按鈕 LED 亮起-杜比音效已啟用 (等化器功能將會停用) LED 熄滅-杜比音效已停用 麥克風 音量 麥克風靜音按鈕 LED 亮起-麥克風靜音 LED 熄滅-麥克風啟用 使用 USB 音量控制器 文件號碼:480HX-HSCRS001.
USB 音量控制器(PC/Mac) 使用方式 如果您要在電腦上使用耳機,請將耳機的 3.5mm 接頭連接至 USB 音效控制器的 3.5mm 插孔, 然後將 USB 線連接至您的電腦。 使用 USB 音量控制器 文件號碼:480HX-HSCRS001.
設定 USB 音量控制器(Windows) 為了獲得最佳的環繞音效體驗,請依照以下步驟設定 Windows。 1. 在工具列的喇叭圖示上按滑鼠 右鍵並選擇「播放裝置」。 2. 在「HyperX Cloud Revolver S」 上按右鍵並選擇「設為預設 裝置」。 文件號碼:480HX-HSCRS001.
3. 在選擇「HyperX Cloud Revolver S」的情況下, 按下「設定」按鈕。 4. 在「聲道」清單中選擇 7.1 環繞聲道,然後按下 「下一步」。 5. 在「選用喇叭」清單,請確定 勾選所有方塊,然後按下 「下一步」。 6. 在「全音域喇叭」清單, 請確定勾選所有方塊, 然後按下「下一步」。 7. 按下「完成」來儲存設定。 文件號碼:480HX-HSCRS001.
8. 按下「錄製」分頁,然後右鍵點 選「HyperX Cloud Revolver S」 接著選擇「設為預設裝置」。 現在您的 HyperX Cloud Revolver S 已準備就緒。 文件號碼:480HX-HSCRS001.
設定 USB 音量控制器(Mac) 為了獲得最佳的環繞音效體驗,請依照以下步驟設定 Mac。 1. 按下 Apple 選單,然後選擇 「系統偏好設定」。 2. 在「系統偏好設定」中按一下 「聲音」。 文件號碼:480HX-HSCRS001.
3. 選擇輸出,然後選擇「HyperX Cloud Revolver S」。 4. 選擇輸入,然後選擇「HyperX Cloud Revolver S」。 文件號碼:480HX-HSCRS001.
5. 打開 Finder,然後選擇應用 程式>工具程式>音訊 MIDI 設定。 6. 選擇「HyperX Cloud Revolver S」然後選擇輸出。 7. 按下「格式」下拉式選單, 然後選擇「8 聲道 16 位元 整數 44.1 kHz」。 8. 按下「設定揚聲器」。 文件號碼:480HX-HSCRS001.
9. 按下「設定」下拉式選單, 選擇 7.1 環繞音效。 10. 按下套用。 現在您的 HyperX Cloud Revolver S 已準備就緒。 文件號碼:480HX-HSCRS001.
在電腦上使用 PC 延長線 如要將耳機連接至同時具有耳機插孔和麥克風接孔的電腦(或其他裝置),請將耳機的 3.5mm 接頭連接至 PC 延長線上的 3.5mm 接孔。PC 延長線上有兩個 3.5mm 接孔。將耳機接頭(帶有 綠色環)插入以綠色輸入或耳機符號 標示的連接埠。將延長線上的麥克風接頭(帶有粉紅色 環)插入以粉紅色輸入或耳機符號 標示的連接埠。 使用 PC 延長線 文件號碼:480HX-HSCRS001.
使用方式 (Xbox One™ & Xbox One S™) 若要在此耳機使用於 Xbox One™,請將 耳機的 3.5mm 接頭直接連接至 Xbox One™ 控制器上 的 3.5mm 插孔 * 若您的 Xbox One ™ 控制器沒有 3.5mm 插孔,您將需要一組 Xbox One™ 立體聲耳機轉接器 (需另購),並將其插入 Xbox One™ 控制器(如下圖。) * 使用於 Xbox One 文件號碼:480HX-HSCRS001.
使用 (PS4™ & PS4™ Pro) USB 音量控制器 如果您要將此耳機連接於 PlayStation™ 4 (PS4™),請將耳機的 3.5mm 接頭插入 USB 音量控 制器的 3.5mm 插孔,然後將 USB 線連接至 PS4™ USB 連接埠。 在「HyperX Cloud Revolver S」裝置被偵測到之後,請依照下列步驟設定 PS4™ 音訊裝置: 1. 開啟您的 PS4 ™ 遊戲主機。 2. 切換至設定功能表並選取。 3. 移至「裝置」並選取此項目。 4. 向下滑動至「聲音裝置」並選取此項目。 5. 設定「輸入裝置」為 HyperX Cloud Revolver S。 6. 設定「輸出裝置」為 HyperX Cloud Revolver S。 7. 選擇「輸出至耳機」,然後選取「所有聲音」。 使用於 PS4 文件號碼:480HX-HSCRS001.
使用方式 (PS4™ & PS4™ Pro) 直接以 3.5mm 連接 如果您要在 PlayStation™ 4 上使用耳機 (Ps4™),請將耳機上的,請將耳機上的 3.5mm 接 頭 直接連接至 PS4™ 遊戲控制器,然後遵循以下步驟: 1. 開啟您的 PS4 ™ 遊戲主機。 2. 切換至設定功能表並選取。 3. 移至「裝置」選單選項並選擇。 4. 向下滑動至「聲音裝置」並選取此項目。 5. 選擇「輸出至耳機」,然後選取「所有聲音」。 使用於 PS4 文件號碼:480HX-HSCRS001.
使用方式 (Wii U™) 若要將此耳機使用於 Wii U™,請將耳機的 3.5mm 接頭直接連接至 Wii U™ 遊戲控制器。 ™ 使用於 Wii U 文件號碼:480HX-HSCRS001.
使用方法(行動裝置) 若要將此耳機使用於具有耳機接孔(4 段式 CTIA) 的行動裝置 (或其他裝置) ,請將 3.5mm 接頭 直接連接至裝置上的耳機接孔。 與行動裝置(行動電話、平板電腦或筆記型電腦)搭配使用 文件號碼:480HX-HSCRS001.