User Guide

PRECAUTIONS FOR USEPRECAUTIONS FOR USE
Your HYT watch is set and ready to be worn.
A colored liquid documents the recent past; a transparent uid indicates the foreseeable
future. Their meeting point is a meniscus in the capillary, aka the now.
Important : If you plan to not wear the watch for
a while, the colored liquid has to be stored in its
own reservoir (on the left bellow).
To do this, pull the crown out to position C
(time setting). Allow the colored liquid to move
into “Zone II” until it starts rewinding. Once the
rewinding phase is complete (colored liquid in
“Zone I”), ensure that the crown remains in the
time setting position C. Your watch is now ready to
be stopped for an extended period.
The capillary is then filled with transparent liquid
(it is possible to still see some colored liquid in
“Zone I”).
Produced and tested to stringent criteria, the constituent components of your HYT
watch together form an exceptionally water resistant unit. To ensure these qualities are
preserved, we recommend that you have the gaskets replaced during a service at an
authorized retailer. Temperature variations, moisture, perspiration or repeated impacts
may adversely affect its water resistance over the years.
With its water resistant case, your HYT watch is fully washable. It should be cleaned
regularly in lukewarm, soapy water, rinsed and then carefully dried with a soft cloth. After
exposure to sea water, rinse your HYT watch in fresh water.
Zone I
Zone II
3
HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com