User's Manual

DS-6210 Base Station Owner's Manual Installation
35
Figure 3-12 Installing the FAN
Figure 3-13 Removing the FAN
Note:
Pull the latch inwards and pull out the FAN in case of removing it during installation. See
Figure 3-13.
Step 5 Install the DIU as shown in Figure 3-14.
1. Slide the DIU along the guide rails.
2. Fasten all screws to fix the DIU.
Fasten the Screw
Figure 3-14 Installing the Divider Unit
Step 6 Install the COM as shown in
Figure 3-15.
1. Slide the COM along the guide rails.
2. Fasten the four screws.