User's Manual

32
11.7 Ignition Sense
Ignition Sense controls the radio on or off andthe
PTT
key enabled or disabled by starting or stopping yourvehicle
engine.
Four types of ignition sense are listed in the following table. The default type is
Disable Ignition Off
, and other types
are enabled by your dealer.
Type Description Operation
Ignition or Switch
Allows you to turn the radio on oroff by the
engine or the
On-Off
key.

To turn the radio on, start the engine or long
pressthe
On-Off
key.

To turn the radio off, stop the engine or press
the
On-Off
key.
Ignition Only
Allows you to turn the radio on or offby the
engine.

To turn the radio on, startthe engine.

To turn the radiooff, stop the engine.
PTT Disable
Allows you to enable the
PTT
key by the
engine.

To enable the
PTT
key, startthe engine.

To disable the
PTT
key, stop the engine.
Disable Ignition
Off
Allows you to turn the radio onby the
engine or the
On-Off
key, and allows you
toturn the radio off only by the
On-Off
key.

To turn the radio on, start the engine or long
pressthe
On-Off
key.

To turn the radio off, press the
On-Off
key.
11.8 Public Address
Public Address allows you to address publicthrough the external speaker (connected to theaccessory connector on the
rear panel).
To enable Public Address, press the preprogrammed
PublicAddress
key.
11.9 Priority Interrupt
Priority Interrupt allows you to interrupt the ongoing activities (such as a call, a call hang status or remote monitor) on
the current channel to release it: therefore, you can initiate a new call or a new data service on that channel.This feature
includes manual priority interrupt and auto priority interrupt.
Manual Priority Interrupt
Press the preprogrammed
Priority Interrupt
key to interrupt the ongoing activities.