Users Manual
Table Of Contents
16
The base station signal is lost.
5.2 Analog Calls
In conventional mode, you can initiate or receive a call on an analog channel with or without signaling.
5.2.1
Call Without Signaling
On an analog channel without signaling, you can initiate acall to all the other users on the channel. Do as follows:
1.
Select the required channel.
2.
Press and hold the PTT key, and speak into the microphone.
5.2.2
Call With Signaling
On an analog channel with signaling, you can initiate a call to a specific contact on the channel. Do as follows:
1.
Rotate the Channel Selector knob to select therequired channel.
2.
Press the OK/Menu key, and go to Contact >Contact List.
3.
Select the required channel.
4.
Press the PTT key or the preprogrammed One TouchCall/Menu key to send the code.
The call is established when the target radio receives anddecodes the matched signaling.
5.3 Emergency Call
The Emergency feature allows you to ask for help from your companion or the control center in case of emergency.
With the highest priority, you can make an emergency call even when your radio is transmitting or receiving.
This feature needs to be configured and enabled by your dealer. For details, refer to the Emergency feature described in
the relevant user manual.