User's Manual

ManualsBrandsHytera Communications ManualsElectronicsDIGITAL MOBILE RADIO

Table Of Contents

Documentation Conventions
1. Packing List
2. Product Overview
- 2.1 Product Layout
- 2.2 Programmable Keys
3. Installation
- 3.1 Instructions
- 3.2 Tools
- 3.3 Parts
- 3.4 Procedure
  - 3.4.1 Installing the TF Card
  - 3.4.2 Installing the Radio
4. Basic Operations
- 4.1 Turning On or Off the Radio
- 4.2 Adjusting the Volume
- 4.3 Switching the Operation Mode
  - 4.3.1 Conventional Mode
    - 4.3.1.2 Selecting a Zone
      - Through Menu
      - Through Programmable Key
    - 4.3.1.3 Selecting a Channel
  - 4.3.2 Trunking Mode
    - 4.3.2.1 Selecting a Group or Private Contact
    - 4.3.2.2 Selecting a Subgroup
      - Through Menu
      - Through Programmable Key
5. Status Indications
- 5.1 LCD Icons
- 5.2 LED Indicators
6. Call Services
- 6.1 Group Call
- 6.2 Private Call
- 6.3 All Call
- 6.4 Broadcast Call (Trunking Only)
- 6.5 Include Call (Trunking Only)
- 6.6 Phone Call
- 6.7 Call on Analog Channel (Conventional Only)
  - 6.7.1 Call without Signaling
  - 6.7.2 Call with Signaling
7. Message Services
- 7.1 Sending a New Message
- 7.2 Replying to a Message
- 7.3 Managing a Message
8. General Features
- 8.1 Settings
- 8.2 Contacts
  - 8.2.1 Creating a Contact
    - 8.2.1.1 Through Contact Menu
    - 8.2.1.2 Through Call Logs
  - 8.2.2 Managing a Favorite Contact
- 8.3 Profiles
- 8.4 Scan
  - 8.4.1 Conventional Mode
    - 8.4.1.1 Enabling the Scan Feature
    - 8.4.1.2 Setting the Scan List
  - 8.4.2 Trunking Mode
    - 8.4.2.1 Pre-registration Hunt
    - 8.4.2.2 Post-registration Hunt
- 8.5 Positioning
- 8.6 BT
- 8.7 One Touch Call/Menu
- 8.8 Quick Dial
- 8.9 Roam
  - 8.9.1 Conventional Mode
  - 8.9.2 Trunking Mode
- 8.10 Clarity Transmission
  - 8.10.1 Conventional Mode
  - 8.10.2 Trunking Mode
- 8.11 DGNA
- 8.12 Ignition Sense
- 8.13 Public Address
- 8.14 Priority Interrupt
  - 8.14.1 Manual Priority Interrupt
  - 8.14.2 Auto Priority Interrupt
- 8.15 Emergency
- 8.16 Horn & Lights
- 8.17 Emergency Erase Data
- 8.18 Stun, Revive, and Kill
  - 8.18.1 Conventional Mode
  - 8.18.2 Trunking Mode
1. Go to Basic Settings > MIC & SPK.
2. Select MIC Selection.
3. Select the audio option.
1. Go to Basic Settings > MIC & SPK.
2. Select SPK Selection.
3. Select the audio option.
9. Troubleshooting
10. Care and Cleaning
- 10.1 Product Care
- 10.2 Product Cleaning
11. Optional Accessories
12. Abbreviations
空白页面

Align the concave side of the plastic upper cover with the aluminum chassis, and then press the cover until the latches

are properly locked.

3.4.2 Installing the Radio

Select a location, drill holes based on the shape of the mounting bracket, and then use the screws (4.8 mm x 20 mm)

to secure the bracket.

Connect the RF antenna, GPS antenna, and power cord to the radio.

Slide the radio into the mounted bracket, and then secure it by using the locking knobs.

Install the microphone hanger in a location where you can reach it easily, and then use the screws (4 mm x 16 mm)

to secure it.

Align the triangle index on the palm microphone with the installation index, plug the connector into the radio, and

then rotate the connector clockwise to secure it.

Place the palm microphone on the hanger.