User's Manual
Table Of Contents
- Documentation Conventions
- 1. Packing List
- 2. Product Overview
- 3. Installation
- 4. Basic Operations
- 5. Status Indications
- 6. Call Services
- 6.1 Group Call
- 6.2 Private Call
- 6.3 All Call
- 6.4 Broadcast Call (Trunking Only)
- 6.5 Include Call (Trunking Only)
- 6.6 Phone Call
- 6.7 Call on Analog Channel (Conventional Only)
- 7. Message Services
- 8. General Features
- 8.1 Settings
- 8.1.1 Basic Settings
- 8.1.2 Call Settings
- 8.1.2.1 Power Level
- 8.1.2.2 VOX
- 8.1.2.3 Talker Alias
- 8.1.2.4 Talk Around (Conventional Only)
- 8.1.2.5 Squelch Level (Conventional Only)
- 8.1.2.6 Compandor (Conventional Only)
- 8.1.2.7 ESN Check in Idle (Trunking Only)
- 8.1.2.8 Call Priority (Trunking Only)
- 8.1.2.9 Any Call (Trunking Only)
- 8.1.2.10 Call Divert (Trunking Only)
- 8.1.3 Security
- 8.1.4 Product Information
- 8.2 Contacts
- 8.3 Profiles
- 8.4 Scan
- 8.5 Positioning
- 8.6 BT
- 8.7 One Touch Call/Menu
- 8.8 Quick Dial
- 8.9 Roam
- 8.10 Clarity Transmission
- 8.11 DGNA
- 8.12 Ignition Sense
- 8.13 Public Address
- 8.14 Priority Interrupt
- 8.15 Emergency
- 8.16 Horn & Lights
- 8.17 Emergency Erase Data
- 8.18 Stun, Revive, and Kill
- 8.1 Settings
- 1. Go to Basic Settings > MIC & SPK.
- 2. Select MIC Selection.
- 3. Select the audio option.
- 1. Go to Basic Settings > MIC & SPK.
- 2. Select SPK Selection.
- 3. Select the audio option.
- 9. Troubleshooting
- 10. Care and Cleaning
- 11. Optional Accessories
- 12. Abbreviations
- 空白页面
12
4. Basic Operations
4.1 Turning On or Off the Radio
To turn on the radio, long press the On-Off key.
To turn off the radio, press the On-Off key.
4.2 Adjusting the Volume
To increase or decrease the volume, rotate the Smart knob clockwise or counter-clockwise.
4.3 Switching the Operation Mode
The radio can operate in conventional mode, or digital/analog trunking mode (enabled by your dealer).
To manually switch the operation mode, do one of the following:
Go to Menu > Mode, press the Navigation key up or down to select the mode, and then press the OK/Menu key.
Press the preprogrammed Operation Mode Switch key.
To allow the radio to automatically switch to a mode based on signal strength, do one of the following:
Go to Menu > Mode > Auto Switch, and then press the OK/Menu key to enable Auto Switch.
Press the preprogrammed Mode Auto Switch key.
4.3.1 Conventional Mode
In conventional mode, a zone is a group of channels within the same operational area. The radio receives and transmits
data and voice on the selected channel after you select a zone and channel. Before selecting a channel, ensure that the