User's Manual
Table Of Contents
- Documentation Conventions
- 1. Packing List
- 2. Product Overview
- 3. Installation
- 4. Basic Operations
- 5. Status Indications
- 6. Call Services
- 6.1 Group Call
- 6.2 Private Call
- 6.3 All Call
- 6.4 Broadcast Call (Trunking Only)
- 6.5 Include Call (Trunking Only)
- 6.6 Phone Call
- 6.7 Call on Analog Channel (Conventional Only)
- 7. Message Services
- 8. General Features
- 8.1 Settings
- 8.1.1 Basic Settings
- 8.1.2 Call Settings
- 8.1.2.1 Power Level
- 8.1.2.2 VOX
- 8.1.2.3 Talker Alias
- 8.1.2.4 Talk Around (Conventional Only)
- 8.1.2.5 Squelch Level (Conventional Only)
- 8.1.2.6 Compandor (Conventional Only)
- 8.1.2.7 ESN Check in Idle (Trunking Only)
- 8.1.2.8 Call Priority (Trunking Only)
- 8.1.2.9 Any Call (Trunking Only)
- 8.1.2.10 Call Divert (Trunking Only)
- 8.1.3 Security
- 8.1.4 Product Information
- 8.2 Contacts
- 8.3 Profiles
- 8.4 Scan
- 8.5 Positioning
- 8.6 BT
- 8.7 One Touch Call/Menu
- 8.8 Quick Dial
- 8.9 Roam
- 8.10 Clarity Transmission
- 8.11 DGNA
- 8.12 Ignition Sense
- 8.13 Public Address
- 8.14 Priority Interrupt
- 8.15 Emergency
- 8.16 Horn & Lights
- 8.17 Emergency Erase Data
- 8.18 Stun, Revive, and Kill
- 8.1 Settings
- 1. Go to Basic Settings > MIC & SPK.
- 2. Select MIC Selection.
- 3. Select the audio option.
- 1. Go to Basic Settings > MIC & SPK.
- 2. Select SPK Selection.
- 3. Select the audio option.
- 9. Troubleshooting
- 10. Care and Cleaning
- 11. Optional Accessories
- 12. Abbreviations
- 空白页面
24
The all call ID must be complied with the dialing rules. For details, consult your dealer.
Through Call Logs
1.
Press the preprogrammed BackDial Call or ReDial Call key.
2.
Select the all call record.
3.
Press the P5/Answer key on the radio, or press the Answer key or the PTT key on the palm microphone.
Through One Touch Call/Menu
With the One Touch Call/Menu feature enabled, press the preprogrammed One Touch Call/Menu key.
6.3.2 Receiving an All Call
You can answer an all call without any operation.
6.3.3 Ending an All Call
Conventional mode
An all call ends when the calling party releases the PTT key.
Trunking mode
A private call ends in any of the following cases:
The calling party presses the P6/End key or places the palm microphone back to the hanger.
The call duration preset by your dealer expires.
The base station signal is lost.
The calling party changes the contact with the Clear Down feature enabled.
6.4 Broadcast Call (Trunking Only)
A broadcast call is a special group call, during which only the calling party can transmit voice.
The Broadcast Call feature is enabled by your dealer.
6.4.1 Initiating a Broadcast Call
6.4.1.1 Through Contact List
Do either of the following:
Press the Back/Subgroup key or the preprogrammed Current Subgroup Contact key, and then select the
subgroup and group contact.