User's Manual

27

Press the P5/Answer key on the radio.

Press the Answer key, , or the PTT key on the palm microphone.
The phone ID must be complied with the dialing rules. For details, consult your dealer.
Through Call Logs
Do one of the following:

Go to Menu > Call Logs.

Press the preprogrammed BackDial Call or ReDial Call key.
Select the PSTN/PABX call record.
Press the P5/Answer key on the radio, or press the Answer key or the PTT key on the palm microphone.
Through One Touch Call/Menu
With the One Touch Call/Menu feature enabled, press the preprogrammed One Touch Call/Menu key.
6.6.2 Receiving a Phone Call

Conventional mode
When receiving a phone call, press the P5/Answer key (with the One-Key Connect feature enabled) or enter the
connect code to join the phone system. Then you can answer the phone call.

Trunking mode
When receiving a PSTN/PABX call, press the P5/Answer key on the radio, or press the Answer key or the PTT key
on the palm microphone within the preset time.
6.6.3 Ending a Phone Call

Conventional mode
A phone call ends in either of the following cases:

The calling party hangs up.

The called party presses the P6/End key (with the One-Key Connect feature enabled) or enters the disconnect
code.

Trunking mode
A phone call ends in any of the following cases:

The calling party presses the P6/End key or places the palm microphone back to the hanger.

The call duration preset by your dealer expires.

The base station signal is lost.