User's Manual

44
Home Station Hunt
In a BS
overlapping area, this feature allows the radio
to
switch back to the home station channel when its signal
strength reaches the preset threshold. It is recommended
that you set your frequently used channel as the home
station channel.

Press the preprogrammed
Background Hunt
,
HomeStation Hunt, or Multi
-
site Handover key.
Multi
-site
Handover
The signal strength received from a BS may fluctuate due
to
position change, affecting
the communication quality
of the radio.
On
such occasions, this feature allows the
radio to automatically register with the BS with stronger
signal
.
Vote Now
This feature allows
an idle radio
to check the signal
strength
of the BS assig
ned in a broadcast call, and decide
whether to register with the BS.
This feature is enabled by default.
8.5 Positioning
The Positioning feature allows you to collect the position information of the radio through satellites.
This feature applies only to radios with GPS, BDS, or GLONASS.
8.5.1 Enabling the Positioning Feature

In conventional mode, go to Menu > GPS > GPS On/Off, COMPASS On/Off, or GLONASS On/Off, and
then press the OK/Menu key to enable the positioning system.

In trunking mode, this feature is enabled by your dealer.
8.5.2 Selecting the Positioning System
The radio supports positioning systems including GPS, BDS/GLONASS, and BDS/GLONASS+GPS. To select the
positioning system, go to Menu > GPS > Position Sys.
This feature applies only to radios with BDS or GLONASS.