Users Manual

10
4.1.3 Ending a Group Call
4.1.3.1 Conventional Mode
In conventional mode, a group call ends when the call hang time expires.
4.1.3.2 Trunking Mode
In trunking mode, a group call ends in any of the following cases:
 The call hang time expires.

The calling party hangs up.
 The call duration exceeds the preset time.
 The BS signal is lost.
 A pre-emptive call or an emergency call occupies the channel.
 The calling party changes the contact with the Clear Down feature enabled.
4.1.4 Initiating a Private Call
4.1.4.1 Through Preset Contact
Press and then rotate the Smart knob to select the digital channel or private contact, and then press and
hold the PTT key.
4.1.4.2 Through Contact List
Go to Menu > Contact, select the private contact, and then press and hold the PTT key.
4.1.4.3 Through Manual Dialing
 Conventional mode: With the private call dial permission enabled by your dealer, on the home screen,
enter the private ID, and then press and hold the PTT key.
 Trunking mode: On the home screen, enter the private ID, and then press or the PTT key.
The private ID must comply with the dialing rules. For details, consult your dealer.
4.1.5 Receiving a Private Call
4.1.5.1 Conventional Mode
You can receive a private call without any operation.
4.1.5.2 Trunking Mode
The operations vary with the setup mode of the private call.
 FOACSU