Users Manual

11
When receiving a FOACSU private call, the radio rings and vibrates. To answer the call, press the PTT
key within the preset time.
 Off Air Call Set-Up
(OACSU):The call is established automatically
4.1.6 Ending a Private Call
4.1.6.1 Conventional Mode
In conventional mode, a private call ends when the call hang time expires.
4.1.6.2 Trunking Mode
In trunking mode, a private call ends in any of the following cases:
 The call hang time expires.

The calling or called party hangs up.
 The call duration exceeds the preset time.
 The base station (BS) signal is lost.
 A pre-emptive call or an emergency call occupies the channel.
 The calling or called party changes the contact with the Clear Down feature enabled.
4.2 Call on Analog Channel
In conventional mode, you can initiate or receive a call on an analog channel with or without signaling.
4.2.1 Call Without Signaling
On an analog channel without signaling, you can initiate a call to all the other users on the
channel. On the home screen press and then rotate the Smart knob to select the channel,
and then press and hold the PTT key.
4.2.2 Call with Signaling
On an analog channel with signaling, you can initiate a call to a specific contact on the channel.
Go to Menu > Contact > Contact List, or press the preprogrammed Contact List key, select the contact,
and then press the PTT key or the preprogrammed One Touch Call key.