Preface Thanks for your favor in our product. This manual is helpful for you to quickly know how to use the product. For detailed features and operations, please refer to the Feature Description and Operation Manual along with the product. To avoid body injury or property loss caused by misoperation, please read the Safety Information Booklet carefully before use.
Icon Conventions : Indicates functions that are available on digital channel only. : Indicates functions that are available on analog channel only. Functions marked with no icon are available on both analog and digital channels. Disclaimer Hytera Communications Corporation Limited (the Company) endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given.
RF Radiation Information This product must be restricted to operations in an occupational/controlled RF exposure environment. Users must be fully aware of the hazards of the exposure and able to exercise control over their RF exposure to qualify for the higher exposure limits. RF Radiation Profile Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are transmitted. RF technology is widely used in communication, medicine, food processing and other fields.
EU Regulatory Conformance As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Please note that the above information is applicable to EU countries only.
Contents 1. Items in the Package ............................................................................................................................ 1 2. Product Overview ................................................................................................................................. 1 2.1 Front Panel ....................................................................................................................................... 2 2.2 Rear Panel ...............................
1. Items in the Package Please unpack carefully and check if all items listed below are received. If any item is missing or damaged, please contact your dealer. Radio Palm Microphone Microphone Hanger and Screws Mounting Bracket Kit Fuse Documentation Kit Power Cord Note The frequency band is marked on the label of antenna; if not, please refer to the label on the radio for frequency band information.
2. Product Overview 2.1 Front Panel No. Part Name No.
2.2 Rear Panel No. Part Name RF Antenna Connector No. Part Name (BNC 1 3 Accessory Connector female) GPS Antenna Connector (SMA 2 Power Inlet 4 female) Note: The GPS antenna connector is available for MD61X mobile radios only. 2.3 Programmable Keys For enhanced convenience, you may request your dealer to program the SK1, SK2, P1, P2 and P3 keys as shortcuts to certain feature. 2.4 LCD Icon Icon Radio Status Blue Tooth is open and connet Low TX power for the current channel.
Icon Radio Status The radio is roaming. The radio is scanning. More bars indicate stronger signal strength. 2.5 LED Indicator LED Indication Radio Status The LED indicator flashes Powering on green. The LED indicator glows Transmitting red. The LED indicator glows Receiving green. The LED indicator flashes Scanning or Roaming orange slowly. The LED indicator flashes Emergency orange rapidly. Call hang time.
3. Installation 3.1 Instructions Before you install the radio in a vehicle, be sure to read the following instructions carefully: The radio must work with a13.6V ± 15% negative ground electrical system only. Ensure to check the ground polarity and voltage of the vehicle power supply prior to installation. Install the radio in a location where you can reach the front panel conveniently. Check how long the screws will extend from the bottom surface of the radio before installation.
3.3 Installation Parts No. Part Name No. Part Name 1 Radio 8 Power Inlet 2 Locking Knobs 9 Power Cord (black) 3 Mounting Bracket 10 Power Cord (red) 4 4.
No. Part Name 6 4 * 16mm Self-tapping Screws 7 Microphone Hanger No. 13 / Part Name GPS Antenna Connector / 3.4 Installation Procedure 1. Install the bracket in a location where you can operate the radio conveniently. 2. Connect accessories such as the antenna and power cord to the radio. 3. Slide the radio into the properly mounted bracket and secure it using the locking knobs. 4. Install the microphone hanger in a location where it can be reached easily. 5.
4. Basic Operations 4.1 Turning the Radio On/Off Long press Power On/Off key to turn the radio on and off. 4.2 Adjusting the Volume After the radio is powered on,turn the volume menu up increase the voice volume, turn the volume menu down is to decease it. 4.3 Selecting a Zone A zone is a group of channels with the same property, which can facilitate convenient management over the channels. The radio supports 3 zones, each of which consists of up to 16 channels.
5. Call Services After the radio is powered on, you can make and receive calls. To ensure optimal volume of the receiving radio, keep the microphone about 2.5 to 5 centimeters away from your mouth when the radio is transmitting. 5.1 Private Call 5.1.1 Initiating a Private Call When you initiate a private call, the radio will display the icon .
Manual Dial Step 1 Go to “Menu -> Contact -> Manual Dial”. Step 2 Input the private call number using the numeric keypad. Step 3 Hold down the PTT key to initiate a private call. Note If both the Private Call Manual Dial and Group Call Manual Dial are available, you can press to switch between the two dialing methods, and the radio will display the call type (Private ID/ Group ID).
5.2.2 Receiving and Responding to a Group Call When you receive a group call, the radio will display the icon on the LCD. You can hold down the PTT key to call back within the preset time. 5.3 Call on Analog Channel (Without Signaling) To transmit on an analog channel, hold down the PTT and speak into the microphone. To receive, release the PTT key.
6. Troubleshooting Phenomena Analysis The radio cannot The power be powered on. disconnected. cord Solution may be Connect the power cord properly. Increase the volume by rotating the Volume The volume level may be low. During Control knob. receiving, the voice is weak, The antenna may get loose or discontinuous may be improperly installed. Turn off the radio and reattach the antenna. or totally inactive. The speaker may be blocked Clean the surface of the speaker. or damaged.
Phenomena Analysis You may Solution locate unfavorable in position. an For example, your communication Move to an open and flat area, and restart the may radio to try again. be blocked by high buildings or frustrated in the underground areas. You may suffer from external Stay away from equipment that may cause disturbance (such as interference. electromagnetic interference). You cannot use the The keypad may fail to function keys. temporarily. Restart the radio.
7. Care and Cleaning To guarantee optimal performance as well as a long service life of the product, please follow the tips below. Product Care Do not pierce or scrape the product. Keep the product far away from substances that can corrode the circuit. Do not hold the product by its antenna or earpiece cable directly. Attach the accessory connector cover when the accessory is not in use. Product Cleaning Caution: Power off the product and disconnect the power supply before cleaning.
8. Optional Accessories The following items are the main optional accessories for the product, and please consult your local dealer for more other accessories. Caution: Use the accessories specified by the Company only. If not, the Company shall not be liable for any loss or damage arising out of use of unauthorized accessories.
Type Model Name RCC05 Mobile Radio Remote Mount Kit (6 meters)(IP67) RCC06 Mobile Radio Remote Mount Kit (3 meters)(IP54) RCC07 Mobile Radio Remote Mount Kit (6 meters)(IP54) - Omni-directional Antenna 16
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
Antenna Installation: install the antenna at least 100cm away from your body, in accordance with the requirements of the antenna manufacturer/supplier. This radio complies with IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an controlled environment .
