Quick Reference Guide

Initiating Group Calls
The following table describes how to initiate a group call
in conventional mode and trunking mode. When you
initiate a group call, the radio displays .
Mode Manner Operation
Conventional
Preset Contact
1. Rotate the Channel
Selector knob to
select the channel
associated with the
required group
contact.
2. Press and hold the
PTT key.
Contact
List/Favorite
Contact
1. Go to Contact >
Contact
List/Favorite
Contact.
2. Select the required
group contact.
3. Press and hold the
PTT key.
Manual Dial
1. Go to Contact >
Manual Dial.
2. Press on the palm
microphone or the
handset to switch the
input mode to Group
ID.
3. Enter the required
group ID.
4. Press and hold the
PTT key.
Mode Manner Operation
Trunking
Preset Contact
1. Rotate the Group
Selector knob to
select the required
group contact.
2. Press and hold the
PTT key.
Group Contact
1. Go to Subgroup >
Members.
2. Select the required
group contact.
3.
Press on the
radio, or press
or press and hold the
PTT key on the palm
microphone or the
handset.
Manual Dial
1. Go to Settings >
Radio Set > Keypad
Mode, and then
select Enable.
2. From the home
screen, enter the
group number.
3. Press on the
radio, or press or
or press and hold
the PTT key on the
palm microphone or
the handset.
For dialing rules, contact your dealer.
Receiving Group Calls
When you receive a group call in conventional mode, the
radio displays . The call is established automatically.
In trunking mode, the radio displays after the call is
established successfully.
Ending Group Calls
In conventional mode and trunking mode, a group call
automatically ends when the call hang time expires.
In trunking mode, a group call also ends in any of the
following cases:
l The calling party ends the call.
l The call duration preset by your dealer expires.
l A preemptive or emergency call interrupts the call.
l The calling party switches to an empty group.
l The base station signal is lost.
Initiating Private Calls
You can initiate simplex or duplex calls, which can be set
by going to Settings>Radio Set>Call Setup Mode or
pressing the preprogrammed Call Setup Mode key.
l Duplex call: both parties can speak at the same time.
l Simplex call: Only one party can speak at one time.
The duplex call is only available for duplex radios.
The following table describes how to initiate a private call
in conventional mode and trunking mode. When you
initiate a private call, the radio displays (half duplex
private call) or (full duplex private call).
6