User's Manual
Table Of Contents
- Preface
- Copyright Information
- Contents
- Documentation Conventions
- 1. Packaging List
- 2. Product Overview
- 3. Before Use
- 4. Basic Operations
- 5. Status Indications
- 6. Call Services
- 7. Message Services
- 8. General Features
- 8.1 Terminal Settings
- 8.2 Network setting
- 8.3 Audio Setting
- 8.4 VOX
- 8.5 Talkgroup
- 8.6 DGNA
- 8.7 Voice Feedback
- 8.8 Power
- 8.9 Work Type
- 8.10 Energy Saving Mode
- 8.11 Group Call Detector
- 8.12 Positioning
- 8.13 BT
- 8.14 Emergency Call
- 8.15 Security
- 9. Troubleshooting
- 10. Product Cleaning
- 11. Optional Accessories
- 12. Abbreviations
10
3. Before Use
3.1 Charging the Battery
Use the approved charger to charge the battery.
Read the Safety Information Booklet before charging.
The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment
regulation approved by International Air Transport Association (IATA). Before initial use, charge the
battery.
Before initial use, make sure to charge the battery. You can charge either the standalone battery or the terminal with
battery attached. It is recommended that the terminal remain powered off during charging.
The LED indicator on the charger shows the charging status, as described in the following table:
Indicator Charging Status
Glows red The battery is being charged.
Glows orange The battery is charged to 90% or above.
Glows green The battery is fully charged.
Flashes red rapidly The battery fails to be charged.
Flashes red slowly No battery is placed on the charger.
3.2 Attaching the Battery
Use the approved battery to avoid explosion during battery replacement.
Dispose of the used battery according to "Precautions for Disposal" in the Safety Information Booklet.
Insert the tabs at the battery’s top part into the slots at the terminal’s top part, and then press the battery latch and
push the battery into the terminal until a click is heard.