User's Manual
Table Of Contents
- Preface
- Copyright Information
- Contents
- Documentation Conventions
- 1. Packaging List
- 2. Product Overview
- 3. Before Use
- 4. Basic Operations
- 5. Status Indications
- 6. Call Services
- 7. Message Services
- 8. General Features
- 8.1 Terminal Settings
- 8.2 Network setting
- 8.3 Audio Setting
- 8.4 VOX
- 8.5 Talkgroup
- 8.6 DGNA
- 8.7 Voice Feedback
- 8.8 Power
- 8.9 Work Type
- 8.10 Energy Saving Mode
- 8.11 Group Call Detector
- 8.12 Positioning
- 8.13 BT
- 8.14 Emergency Call
- 8.15 Security
- 9. Troubleshooting
- 10. Product Cleaning
- 11. Optional Accessories
- 12. Abbreviations
11
3.3 Attaching the Antenna
Do not hold the terminal by the antenna and swing it. This may affect the antenna performance and shorten
the life span of the antenna.
3.4 Attaching the Belt Clip
1.
Make sure the arc end of the metal rotating component of the belt clip is vertical to the ground.
2.
Insert the component into the fastener of the terminal’s rear cover until a click is heard.