User's Manual
Table Of Contents
- Preface
- Copyright Information
- Contents
- Documentation Conventions
- 1. Packaging List
- 2. Product Overview
- 3. Before Use
- 4. Basic Operations
- 5. Status Indications
- 6. Call Services
- 7. Message Services
- 8. General Features
- 8.1 Terminal Settings
- 8.2 Network setting
- 8.3 Audio Setting
- 8.4 VOX
- 8.5 Talkgroup
- 8.6 DGNA
- 8.7 Voice Feedback
- 8.8 Power
- 8.9 Work Type
- 8.10 Energy Saving Mode
- 8.11 Group Call Detector
- 8.12 Positioning
- 8.13 BT
- 8.14 Emergency Call
- 8.15 Security
- 9. Troubleshooting
- 10. Product Cleaning
- 11. Optional Accessories
- 12. Abbreviations
13
4. Basic Operations
4.1 Turning the Terminal On or Off
4.1.1 Turning the Terminal On
1.
Long press for two seconds.
2.
Press the Emergency key.
3.
If configured, the terminal automatically starts up when you attach the battery.
4.1.2 Turning the Terminal Off
1.
Long press for 2 seconds.
2.
When the OLED display shows "Power off?", press the OK key.
4.2 Adjusting the Volume
To increase the volume, rotate the Volume Control Knob clockwise.
To decrease the volume, rotate the Volume Control Knob anticlockwise.
4.3 Locking or Unlocking the Keypad
When the keypad is not in use, it is recommended that you lock it to avoid unintended operations.
Auto Lock
On the home screen, press the Menu key, go to Settings > Radio > Keypad > Auto Lock, and then select On.
With the Auto Lock feature enabled, if no operation is made or no call or message is received within the preset
time, the keypad will be locked automatically.
Manual Lock or Unlock
On the home screen, press the OK key and then the P1 key.
4.4 Switching the Operation Mode
The terminal can operate in DMO or TMO.
Manual Switch
On the home screen, press the Menu key, go to Mode, and then select the mode.
On the home screen, press the OK key, go to Mode, and then select the mode.
Press the preprogrammed TMO&DMO Switch key.
Auto Switch