User's Manual
Table Of Contents
- Preface
- Copyright Information
- Contents
- Documentation Conventions
- 1. Packaging List
- 2. Product Overview
- 3. Before Use
- 4. Basic Operations
- 5. Status Indications
- 6. Call Services
- 7. Message Services
- 8. General Features
- 8.1 Terminal Settings
- 8.2 Network setting
- 8.3 Audio Setting
- 8.4 VOX
- 8.5 Talkgroup
- 8.6 DGNA
- 8.7 Voice Feedback
- 8.8 Power
- 8.9 Work Type
- 8.10 Energy Saving Mode
- 8.11 Group Call Detector
- 8.12 Positioning
- 8.13 BT
- 8.14 Emergency Call
- 8.15 Security
- 9. Troubleshooting
- 10. Product Cleaning
- 11. Optional Accessories
- 12. Abbreviations
16
5. Status Indications
5.1 LCD Icons
5.1.1 Basic Status Icons
Icon Terminal Status
The number of bars indicates the power left in the battery.
The battery is counterfeit.
The terminal is prohibited from transmitting due to low battery.
The terminal does not registered with the system in TMO.
The terminal is registered with the system in TMO, and more bars indicate stronger signal strength.
In Graceful Service Degradation Mode, the terminal with weak signal strength is able to receive
group calls, initiate or receive emergency calls, and send emergency status messages.
The Silent mode is disabled.
The Silent mode is enabled.
A gateway is available and connected in DMO.
A gateway is available but unconnected in DMO.
A repeater is available and connected in DMO.
A repeater is available but unconnected in DMO.
The terminal is in Fallback mode.
The Scan feature is enabled in TMO.
The Scan feature is enabled in Fallback mode.
The keypad is locked.
The terminal is prohibited from transmitting.
The Voice Operated Transmit (VOX) feature is enabled.
5.1.2 Short Data and Call Icons
Icon Terminal Status
There is/are unread Message(s).
An emergency call is in progress.