User's Manual

22
6.5.1 Initiating a Broadcast Call

Through the menu
1. On the home screen, press the Menu key, go to Services, and then select Broadcast Call.
2. Press and hold the PTT key.

Through the shortcut
1. Press the Broadcast key.
2. Press and hold the PTT key.
6.5.2 Receiving a Broadcast Call
You can listen to an incoming broadcast call without any operation.
6.5.3 Ending a Broadcast Call
With the permission of the trunking system, the calling party can press to end a broadcast call. The called party
can press to exit a broadcast call.
Without the permission of the trunking system, the calling party can press to exit a broadcast call and the called
party enters channel reservation state.
6.6 2nd PTT Call
If SK1 or SK2 is preprogrammed as the Second PTT key, you can use it to initiate a 2nd PTT call.
6.6.1 TMO
If the terminal is configured with the 2nd PTT group and the Second PTT key, press the key to initiate a 2nd PTT
call.
If the terminal is only configured with the Second PTT key, do as follows:
1. On the home screen, press the Cancel/Back key, or press the Menu key and then go to Group.
2. Press the OK key, and then select the folder and group.
3. Press the Menu key, and then select As 2nd PTT Group.
4. Press the preprogrammed Second PTT key.
To receive or end a 2nd PTT call, see 6.1.2 Receiving a Group Call or 6.1.3 Ending a Group Call.
6.6.2 DMO
Press the preprogrammed Second PTT key to initiate a 2nd PTT call to the default group.