User's Manual
Table Of Contents
- Preface
- Copyright Information
- Contents
- Documentation Conventions
- 1. Packaging List
- 2. Product Overview
- 3. Before Use
- 4. Basic Operations
- 5. Status Indications
- 6. Call Services
- 7. Message Services
- 8. General Features
- 8.1 Terminal Settings
- 8.2 Network setting
- 8.3 Audio Setting
- 8.4 VOX
- 8.5 Talkgroup
- 8.6 DGNA
- 8.7 Voice Feedback
- 8.8 Power
- 8.9 Work Type
- 8.10 Energy Saving Mode
- 8.11 Group Call Detector
- 8.12 Positioning
- 8.13 BT
- 8.14 Emergency Call
- 8.15 Security
- 9. Troubleshooting
- 10. Product Cleaning
- 11. Optional Accessories
- 12. Abbreviations
35
8.5.8.3 Creating a Scan List
On the home screen, press the Cancel/Back key, go to Scan List, press the Menu key, and then select New ScanList.
8.5.8.4 Setting the Priority for a Group in the Scan List
Go to a group in the scan list, press the Menu key, select Priority, and then select High, Medium, or Low.
8.5.8.5 Other Operations
On the home screen, press the Cancel/Back key, select Scan List to select a list, and then press the Menu key.
Then perform the following operations on the list:
Select ActiveScanList or InactiveScanList to activate or deactivate the scan list.
Select Add to select a talkgroup to add it to the scan list.
Select Clear, and then confirm the operation to clear all scan groups in the scan list.
Select Delete, and then confirm the operation to delete the scan list.
When the notification group is set to the default group, the scan list is invalid.
The notification group cannot be added to the scan list.
The scan list cannot be set to the selected folder.
8.6 DGNA
In TMO, the DGNA feature allows you to initiate a call to or receive a call from a dynamic group temporarily
created by a dispatcher. You cannot use the dynamic group if it is dismissed by the dispatcher.
All dynamic groups are saved in the group menu.
For operations of initiating, receiving, or ending a DGNA call, see 6.1 Group Call.
8.7 Voice Feedback
The Voice Feedback feature allows the terminal to automatically broadcast upon group switch, feature activation,
or information change, or by shortcut key, according to the pre-configured voice files.
To set the feature, on the home screen, press the Menu key, go to Settings > Function > Voice Feedback > Switch,
and then select On or Off.
The terminal supports Voice Feedback in three languages in case that language packages are configured. If no voice
files are programmed, or the terminal is in silent or emergency silent mode, the terminal will not broadcast.
8.8 Power
The Power feature is used to set the maximum transmission power of the terminal. The default maximum power is