User's Manual
Table Of Contents
- Preface
- Copyright Information
- Contents
- Documentation Conventions
- 1. Packaging List
- 2. Product Overview
- 3. Before Use
- 4. Basic Operations
- 5. Status Indications
- 6. Call Services
- 7. Message Services
- 8. General Features
- 8.1 Terminal Settings
- 8.2 Network setting
- 8.3 Audio Setting
- 8.4 VOX
- 8.5 Talkgroup
- 8.6 DGNA
- 8.7 Voice Feedback
- 8.8 Power
- 8.9 Work Type
- 8.10 Energy Saving Mode
- 8.11 Group Call Detector
- 8.12 Positioning
- 8.13 BT
- 8.14 Emergency Call
- 8.15 Security
- 9. Troubleshooting
- 10. Product Cleaning
- 11. Optional Accessories
- 12. Abbreviations
46
10. Product Cleaning
To guarantee optimal performance as well as a long service life of the product, please follow these tips.
10.1 Product Care
Do not pierce or scrape the product.
Keep the product away from substances that can corrode the circuitry.
Do not hold the product by its antenna or earpiece cable.
Attach the accessory connector cover when no accessory is in use.
10.2 Product Cleaning
Turn off the product and remove the battery before cleaning.
Clean up the dust and fine particles on the product surface and charging piece with a clean and dry lintfree cloth
or a brush regularly.
Use neutral cleanser and a non-woven fabric to clean the keys, control knobs and front case. Do not use chemical
preparations such as stain removers, alcohol, sprays or oil preparations, so as to avoid surface case damage.
Make sure the product is completely dry before use