Quick Reference Guide

l The calling party long presses the Cancel/Back
key. The called party can exit the emergency call
by doing so.
To end an emergency call in Silent mode, press the
OK key and then the P3 key.
Emergency Cycle
During an emergency call, the called party cannot
request talk permit until the calling party presses the
PTT key. To avoid this situation, request your dealer
to configure the Emergency Cycle feature. With this
feature enabled, the calling party and the called party
request talk right and speak in turn until the
emergency cycle call time runs out.
In an emergency cycle, the calling party can
press and hold the PTT key to pre-empt talk
right. After the talk right is pre-empted, the
emergency cycle ends.
Message Services
Short Messages
Short messages include status messages and text
messages.
You can go to Menu > Message > Settings to
enable DeliveryReport, Save SentMsg, and
Msg Preview, or select Adr Type and Msg Box
Type.
Sending a Status Message
To send a status message, do as follows:
1. Go to Menu > Message > Status Msg.
2. Select the required status message, and then press
the OK key.
3. Press the Menu key, and then select Send.
4. Select the required contact, and then press the
OK key.
Viewing a Message
To view a newly received message from the home
screen, press the OK key.
To view all received messages from the Inbox or
Outbox, go to Menu > Message > Inbox/Outbox, and
then select the required message.
Resending a Message
To resend a message, do as follows:
1. Go to Menu > Message > Outbox.
2. Select the required message, and then press the
OK key.
3. Press the Menu key, and then select Resend.
Forwarding a Message
To forward a message, do as follows:
1. Go to Menu > Message > Inbox/Outbox.
2. Select the required message, and then press the
OK key.
3. Press the Menu key, and then select Forward.
4. Select the required contact, and then press the
OK key.
Deleting a Message
To delete a message, do as follows:
1. Go to Menu > Message >
Inbox/Outbox/Templates.
7