User's Manual
Table Of Contents
- Preface
- 1. Packing List
- 2. Product Overview
- 3. Before Use
- 4. Basic Operations
- 4.1 Turning On or Off the Product
- 4.2 Understanding the Screen
- 4.3 Connecting to Network
- 4.4 Authentication
- 1. Obtain the authentication code from Hytera.
- 2. In the MPU video preview screen, tap and select Auth.
- 3. In the Auth page, enter the authentication code and tap Save.
- 4. In the blank space of the authentication page, tap the screen for six times to display the Auth_ID information.
- 5. Tap Get Auth_ID, and send the ID to Hytera.
- 4.5 Logging in to the SmartEye Server
- 5. System Settings
- 6. MPU Basic Settings
- 6.1 Language
- 6.2 Device Info
- 6.3 Storage
- 6.4 Infrared Settings
- 6.5 Voice Settings
- 6.6 Version
- 6.7 Platform
- 6.8 Restore Default Settings
- 6.9 Screen Lit
- 6.10 Auto Run and Auto Login
- 6.11 GPS
- 6.12 Auto Record
- 6.13 Circulating Storage
- 6.14 Pre-record and Post-record
- 7. MPU Other Settings
- 7.1 Camera Settings
- 7.2 Video Settings
- 7.3 Audio Settings
- 1. In the MPU video preview mode, tap and enter Camera.
- 2. Tap Audio Settings to set the parameters.
- 3. (Optional) To eliminate the echo between the product and SmartEye client, check Enable.
- It is recommended to use microphone or earphone at the SmartEye client and BT earphone for this product to avoid echo.
- 7.4 OSD Information
- 8. MPU Features
- 9. Playing Back Videos/Audios/Photos
- 10. Data Acquisition
- 11. Troubleshooting
- 12. Care and Cleaning
- 13. Optional Accessories
21
: The feature is enabled.
6.7.4 GPS Storage
1.
Tap
Platform
and enter the platform page.
2.
Tap the
following GPS Storage.
: The feature is disabled.
: The feature is enabled.
6.8 Restore Default Settings
Tap
Restore Default Settings
and tap
OK
in the popup window to restore the MPU to factory settings.
Please choose carefully. After this operation, the current settings will be lost.
6.9 Screen Lit
By enabling Screen Lit, while the MPU is opened, the screen will always light up.
Tap the
following Screen Lit.
: The feature is disabled.
: The feature is enabled.
6.10 Auto Run and Auto Login
By enabling Auto Run, the product automatically opens MPU upon powering-on. By enabling Auto Login,
the MPU automatically logs in to the SmartEye server upon MPU opening.
Tap the
following Auto Run or Auto Login.
: The feature is disabled.
: The feature is enabled.
6.11 GPS
By enabling GPS, the product automatically locates the current location.
Tap the following GPS.