User's Manual
Table Of Contents
- Preface
- 1. Packing List
- 2. Product Overview
- 3. Before Use
- 4. Basic Operations
- 4.1 Turning On or Off the Product
- 4.2 Understanding the Screen
- 4.3 Connecting to Network
- 4.4 Authentication
- 1. Obtain the authentication code from Hytera.
- 2. In the MPU video preview screen, tap and select Auth.
- 3. In the Auth page, enter the authentication code and tap Save.
- 4. In the blank space of the authentication page, tap the screen for six times to display the Auth_ID information.
- 5. Tap Get Auth_ID, and send the ID to Hytera.
- 4.5 Logging in to the SmartEye Server
- 5. System Settings
- 6. MPU Basic Settings
- 6.1 Language
- 6.2 Device Info
- 6.3 Storage
- 6.4 Infrared Settings
- 6.5 Voice Settings
- 6.6 Version
- 6.7 Platform
- 6.8 Restore Default Settings
- 6.9 Screen Lit
- 6.10 Auto Run and Auto Login
- 6.11 GPS
- 6.12 Auto Record
- 6.13 Circulating Storage
- 6.14 Pre-record and Post-record
- 7. MPU Other Settings
- 7.1 Camera Settings
- 7.2 Video Settings
- 7.3 Audio Settings
- 1. In the MPU video preview mode, tap and enter Camera.
- 2. Tap Audio Settings to set the parameters.
- 3. (Optional) To eliminate the echo between the product and SmartEye client, check Enable.
- It is recommended to use microphone or earphone at the SmartEye client and BT earphone for this product to avoid echo.
- 7.4 OSD Information
- 8. MPU Features
- 9. Playing Back Videos/Audios/Photos
- 10. Data Acquisition
- 11. Troubleshooting
- 12. Care and Cleaning
- 13. Optional Accessories
Copyright Information
Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in the
People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its
trademarks and product names. All other trademarks and/or product names that may be used in this manual are
properties of their respective owners.
The product described in this manual may include the Company's computer programs stored in memory or other media.
Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its computer
programs. The purchase of this product shall not be deemed to grant, either directly or by implication, any rights to
the purchaser regarding the Company's computer programs. The Company's computer programs may not be copied,
modified, distributed, decompiled, or reverse-engineered in any manner without the prior written consent of the
Company.
Disclaimer
The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or
reliability is given. All the specifications and designs are subject to change without notice due to continuous
technological development. No part of this manual may be copied, modified, translated, or distributed in any manner
without the prior written consent of the Company.
We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of the
third-party products and contents involved in this manual.
If you have any suggestions or would like to receive more information, please visit our website at:
http://www.hytera.com.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance
with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. Verification of harmful interference by this equipment to radio
or television reception can be determined by turning it off and then on. The user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a different circuit to that of the receiver's outlet.
Consult the dealer or an experienced radio/TV technician for help.