User's Manual
Table Of Contents
- Table of contents
- 1 Notes on the document
- 2 Safety regulations
- 3 Product description
- 3.1 Characteristics of the DIB-R5
- 3.2 Components
- 3.2.1 Connection and control panel
- 3.2.2 VAC voltage supply
- 3.2.3 VDC voltage supply
- 3.2.4 Divider Unit (DIU)
- 3.2.5 Transmitting filter
- 3.2.6 TETRA Channel Unit (CHU)
- 3.2.7 Base Station Controller Unit (BSCU)
- 3.2.8 Interconnection Relay Unit (IRU) ‒ only in the case of a CHU expansion
- 3.2.9 Fan unit
- 3.2.10 Cavity combiner
- 3.2.11 Backplane
- 3.3 Interfaces
- 3.4 Wiring diagrams
- 3.5 Redundancy options
- 3.6 Scope of delivery
- 4 Operation
- 4.1 Safety measures and prerequisites
- 4.2 Switching on the DIB-R5 advanced
- 4.3 Function tests and operating surveillance
- 5 Service interruption
- 6 Recommissioning
- 7 Maintenance
- 8 Troubleshooting
1.6 Further applicable documents
Apart from the present documentation, the scope of delivery of the product includes addi-
tional documents. In addition to the contents of the present documentation, all the other
documents associated with the product must always be taken into consideration. They
are mandatory for the use of the product. If required, revert to Hytera Mobilfunk GmbH to
request the other applicable documents.
These are:
n DIB-R5 advanced Technical Data,
describe the technical properties of the product.
n DIB-R5 advancedSite Requirements,
describe the requirements for the site where the product is used.
n DIB-R5 advanced Installation Manual
describes the proper setup and electric connection of the product at the site.
n DIB-R5 advanced Configuration Manual,
describes the configuration of the product.
n DIB-R5 advancedService and Maintenance manual,
describes the maintenance and care of the product and the replacement of the com-
ponents installed in the product
n Requirement Manual IP/VoIP
describes the requirements for securing the IP communication within
ACCESSNET-T IP mobile radio networks as well as outside, e.g. via VoIP telephone
systems (Voice-over-IP, VoIP).
n ACCESSNET-T IP Service Computer Configuration Manual
describes the configuration of the service computer that is used for the installation
and commissioning of network constituents of the ACCESSNET-T IP as well as for
service and maintenance purposes.
n User manuals of network management clients
provides information required for proper operation of the product and support trouble-
shooting.
The user manuals for the following products must be observed:
– NMC-511 FaultManager
– NMC-515 ConfigurationManager
n Open Source Acknowledgement
contains information on the respective Open Source software the product comprises,
including the information on the license(s) used and the related license agreements.
n ACCESSNET-T IP Versions
contains information about all versions that are valid for the present PV, such as com-
ponent versions of software components or document versions.
n project-specific documents such as the "Base Design" document, where applicable,
describes the implemented network and the associated properties and requirements.
Further applicable documents
Please also heed the documentation of the third-party devices connected to the product
to prevent negative effects or problems with product.
Notes on the document
Further applicable documents
DIB-R5 advanced
11Operation Manual 90DIBR5advancedOM02 - 1.0