User's Manual
Table Of Contents
- Table of contents
- 1 Notes on the document
- 2 Safety regulations
- 3 Product description
- 3.1 Characteristics of the DIB-R5
- 3.2 Components
- 3.2.1 Connection and control panel
- 3.2.2 VAC voltage supply
- 3.2.3 VDC voltage supply
- 3.2.4 Divider Unit (DIU)
- 3.2.5 Transmitting filter
- 3.2.6 TETRA Channel Unit (CHU)
- 3.2.7 Base Station Controller Unit (BSCU)
- 3.2.8 Interconnection Relay Unit (IRU) ‒ only in the case of a CHU expansion
- 3.2.9 Fan unit
- 3.2.10 Cavity combiner
- 3.2.11 Backplane
- 3.3 Interfaces
- 3.4 Wiring diagrams
- 3.5 Redundancy options
- 3.6 Scope of delivery
- 4 Operation
- 4.1 Safety measures and prerequisites
- 4.2 Switching on the DIB-R5 advanced
- 4.3 Function tests and operating surveillance
- 5 Service interruption
- 6 Recommissioning
- 7 Maintenance
- 8 Troubleshooting
The following table describes the recommended number of PSMs depending on the
voltage supply and the number of installed CHUs per equipment or compact rack.
Recommended number of PSMs
Voltage supply Number of CHUs Number of PSMs
90 V
AC
- 170 V
AC
(nominal) 1 to 2 2
3 to 4 4
170 V
AC
- 250 V
AC
(nominal) 1 to 2 1
3 to 4 2
The following figure shows the front view of the PSU. The following table describes it in
detail.
Figure 12: PSU (front view)
Legend: PSU (front view)
No. Component Description
1 Mounting frame The mounting frame is used for accommodating the Power
Supply Modules (PSM)
2 Power Supply
Module (PSM)
Number depending on the V
AC
voltage at the location and
the number of installed CHUs, refer to
Ä
Table “Recom-
mended number of PSMs” on page 34
The following figure shows the front view of a PSM. The following table describes it in
detail.
Figure 13: PSM (front view)
Product description
Components> VAC voltage supply
DIB-R5 advanced
34 Operation Manual 90DIBR5advancedOM02 - 1.0