User's Manual
Table Of Contents
- Table of contents
- 1 Notes on the document
- 2 Safety regulations
- 3 Product description
- 3.1 Characteristics of the DIB-R5
- 3.2 Components
- 3.2.1 Connection and control panel
- 3.2.2 VAC voltage supply
- 3.2.3 VDC voltage supply
- 3.2.4 Divider Unit (DIU)
- 3.2.5 Transmitting filter
- 3.2.6 TETRA Channel Unit (CHU)
- 3.2.7 Base Station Controller Unit (BSCU)
- 3.2.8 Interconnection Relay Unit (IRU) ‒ only in the case of a CHU expansion
- 3.2.9 Fan unit
- 3.2.10 Cavity combiner
- 3.2.11 Backplane
- 3.3 Interfaces
- 3.4 Wiring diagrams
- 3.5 Redundancy options
- 3.6 Scope of delivery
- 4 Operation
- 4.1 Safety measures and prerequisites
- 4.2 Switching on the DIB-R5 advanced
- 4.3 Function tests and operating surveillance
- 5 Service interruption
- 6 Recommissioning
- 7 Maintenance
- 8 Troubleshooting
3.4.3 Antenna configurations
The following table provides an overview of the antenna configurations that are described
in the following chapters.
Overview of antenna configurations
Antenna configuration Described in
Ä
Antenna configuration with four CHUs
and DUPLEXER
Ä
Antenna configuration with four CHUs
and DUPLEXER
Ä
Antenna configuration with four CHUs
and TX FILTER
Ä
Chapter 3.4.3.2 “Antenna configuration
with four CHUs and TX FILTER”
on page 59
3.4.3.1 Antenna configuration with four CHUs and DUPLEXER
The following figure shows the antenna configuration with four CHUs and DUPLEXER.
Figure 35: Antenna configuration with four CHUs and DUPLEXER
3.4.3.2 Antenna configuration with four CHUs and TX FILTER
The following figure shows the antenna configuration with four CHUs and TX FILTER.
Product description
Wiring diagrams> Antenna configurations
DIB-R5 advanced
59Operation Manual 90DIBR5advancedOM02 - 1.0