User's Manual
Table Of Contents
- Table of contents
- 1 Notes on the document
- 2 Safety regulations
- 3 Product description
- 3.1 Characteristics of the DIB-R5
- 3.2 Components
- 3.3 Interfaces
- 3.4 Wiring diagrams
- 3.5 Redundancy options
- 3.6 Scope of delivery
- 4 Operation
- 4.1 Safety measures and prerequisites
- 4.2 Switching on the DIB-R5 flexibleTx
- 4.3 Function tests and operational monitoring
- 4.3.1 Work equipment for function tests
- 4.3.2 Connecting the service computer
- 4.3.3 Checking operating states
- 4.3.4 Checking the availability
- 4.3.5 Checking standby carriers ‒ optional
- 4.3.6 Function tests and GNSS operational monitoring
- 4.3.7 Function tests and PTP operational monitoring (optional)
- 4.3.8 Checking external antenna coupling systems
- 5 Service interruption
- 6 Recommissioning
- 7 Maintenance
- 8 Troubleshooting
- 9 Index
1.6 History of changes
The following table identifies the changes made to a document. The following reasons for
changes are distinguished:
n Content-related changes (e.g. functional expansions or new functions)
n Editorial changes (e.g. changes to the layout)
n Fault corrections (document-specific corrections)
History of changes
Version Date Reason for
changes
Implemented changes refer to
1.1 2016-01-25 Content-
related
changes
Expansion of safety regulations
(FCC/IC)
Ä
Chapter 2 “Safety reg-
ulations” on page 15
Product description updated
Ä
Chapter 3 “Product
description” on page 25
1.2 2016-02-02 Content-
related
changes
"Model Name" updated
Ä
Table “Certified fre-
quency ranges (FCC/
IC)” on page 16
1.7 Further applicable documents
Apart from the present documentation, the scope of delivery of the product includes addi-
tional documents. In addition to the contents of the present documentation, all the other
documents associated with the product must always be taken into consideration. They
are mandatory for the use of the product. If required, revert to Hytera Mobilfunk GmbH to
request the other applicable documents.
These are:
n DIB-R5 flexibleTx Technical Data
describe the technical properties of the product.
n DIB-R5 flexibleTx Site Requirements
describe the requirements for the site where the product is used.
n DIB-R5 flexibleTx Installation Manual
describes the proper setup and electrical connection of the product at site.
n DIB-R5 flexibleTx Configuration Manual
describes the configuration of the product.
n DIB-R5 flexibleTx Service and Maintenance Manual
describes the maintenance and care of the product and the replacement of the com-
ponents installed in the product.
n Requirement Manual IP/VoIP
describes the requirements for securing the IP communication within
ACCESSNET-T IP mobile radio networks as well as outside, e.g. via VoIP telephone
systems (Voice-over-IP, VoIP).
n ACCESSNET-T IP Service Computer Configuration Manual
describes the configuration of the service computer that is used for the installation
and commissioning of network constituents of the ACCESSNET-T IP as well as for
service and maintenance purposes.
Notes on the document
Further applicable documents
DIB-R5 flexibleTx
11Operation Manual 90DIBR5flexibleTxOM02 - 1.2