User's Manual
Table Of Contents
- Table of contents
- 1 Notes on the document
- 2 Safety regulations
- 3 Product description
- 3.1 Characteristics of the DIB-R5
- 3.2 Components
- 3.3 Interfaces
- 3.4 Wiring diagrams
- 3.5 Redundancy options
- 3.6 Scope of delivery
- 4 Operation
- 4.1 Safety measures and prerequisites
- 4.2 Switching on the DIB-R5 flexibleTx
- 4.3 Function tests and operational monitoring
- 4.3.1 Work equipment for function tests
- 4.3.2 Connecting the service computer
- 4.3.3 Checking operating states
- 4.3.4 Checking the availability
- 4.3.5 Checking standby carriers ‒ optional
- 4.3.6 Function tests and GNSS operational monitoring
- 4.3.7 Function tests and PTP operational monitoring (optional)
- 4.3.8 Checking external antenna coupling systems
- 5 Service interruption
- 6 Recommissioning
- 7 Maintenance
- 8 Troubleshooting
- 9 Index
2 Safety regulations
This chapter describes the safety regulations relevant for using the product
DIB-R5 flexibleTx.
2.1 Safety instructions and declaration of conformity
The operation of the product is subject to the statutory provisions of the respective
country, in which the product is used. For the operation, the required operating licenses
must be requested from the responsible local authorities. Particularly the frequency range
used must be reserved for the respective purpose in the country, in which the product is
used. The product user is responsible for complying with the statutory provisions and the
intended use.
2.1.1
Safety instructions and declaration of conformity for North America
The product complies with the requirements of the Federal Communications Commission
(FCC).
This device complies with part 15 and 90 of the FCC Rules. Operation is subject to the
following two conditions:
n This device may not cause harmful interference, and
n this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The product complies with the requirements of ICES-003 Issue 5 and RSS-119 of
Industry Canada (IC).
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
n l'appareil ne doit pas produire de brouillage, et
n l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
n This device may not cause interference, and
n this device must accept any interference, including interference that may cause unde-
sired operation of the device.
Safety regulations
Safety instructions and declaration of conformity > Safety instructions and declaration of conformity for North America
DIB-R5 flexibleTx
13Operation Manual 90DIBR5flexibleTxOM02 - 1.2