User's Manual
Table Of Contents
- Table of contents
- 1 Notes on the document
- 2 Safety regulations
- 3 Product description
- 3.1 Characteristics of the DIB-R5
- 3.2 Components
- 3.3 Interfaces
- 3.4 Wiring diagrams
- 3.5 Redundancy options
- 3.6 Scope of delivery
- 4 Operation
- 4.1 Safety measures and prerequisites
- 4.2 Switching on the DIB-R5 flexibleTx
- 4.3 Function tests and operational monitoring
- 4.3.1 Work equipment for function tests
- 4.3.2 Connecting the service computer
- 4.3.3 Checking operating states
- 4.3.4 Checking the availability
- 4.3.5 Checking standby carriers ‒ optional
- 4.3.6 Function tests and GNSS operational monitoring
- 4.3.7 Function tests and PTP operational monitoring (optional)
- 4.3.8 Checking external antenna coupling systems
- 5 Service interruption
- 6 Recommissioning
- 7 Maintenance
- 8 Troubleshooting
- 9 Index
Operation of the product in North America
The product is certified for operation on the territory of the United Sates of America and
of Canada by the Federal Communications Commission (FCC) as well as by Industry
Canada (IC). It may only be operated in the certified frequency ranges and at the fre-
quencies approved at the sites concerned.
The FCC and IC has approved the DIB-R5 for the USA and/or Canada for the frequency
ranges listed in the table below.
Certified frequency ranges (FCC/IC)
Authority Model Name FCC Identifier/Cer-
tification Number
Frequency range
(MHz)
Federal Communi-
cations Commission
(FCC)
DIF-R5400 ZW4DIF5400 450,0 to 470,0
DIF-R5800 ZW4DIF5800 854,0 to 869,0
Industry Canada
(IC)
DIF-R5400 4431B-DIF5400
n 406,1 to 430,0
n 450,0 to 470,0
DIF-R5800 4431B-DIF5800 851,0 to 869,0
Further information on the certifications is available on the websites of the FCC and the
IC:
n FCC:
http://www.fcc.gov/
n IC:
http://www.ic.gc.ca/
The product meets the requirements of FCC and IC for the United States and Canada,
respectively, only if the external antenna coupling system meets all requirements at all
times, refer to
Ä
Table “Requirements for external antenna coupling systems” on
page 15.
Responsibility for the installation, commissioning and maintenance of the external
antenna coupling system
The network operator is responsible for the proper installation, commissioning and main-
tenance of external antenna coupling systems unless this is an integral part of the con-
tract with the Hytera Mobilfunk GmbH. An installer who may have been entrusted with
the installation/commissioning and/or maintenance of the antenna coupling system is
responsible for complying with all the applicable requirements and for the metrological
tests required afterwards.
The network operator is responsible for ensuring that:
– all of the requirements listed in the following are met at any time.
– equipment for overload protection and lightning protection has been provided at the
installation site.
Safety regulations
Safety instructions and declaration of conformity > Safety instructions and declaration of conformity for North America
DIB-R5 flexibleTx
14 Operation Manual 90DIBR5flexibleTxOM02 - 1.2