User's Manual

Make sure that all the security measures on the equipment, on the connecting cables and
on the load have been taken. Electrical connections may be made/disconnected only
when neither voltage nor current is applied to the equipment. Voltage may still be present
on the outputs of the equipment after the device has been switched off.
Only perform those tasks described in the documents included in the scope of delivery of
the product.
2.3.4 Hazardous substances
The following chapters contain information on hazardous substances.
2.3.4.1 Hazardous substances outside Europe
All the stipulated laws and provisions of the respective country of use shall always apply.
The network operator is responsible for the adherence to these laws and provisions.
2.3.5
Product disposal
The following chapters contain information on product disposal.
2.3.5.1 Product disposal outside Europe
All the stipulated laws and provisions of the respective country of use shall always apply.
The operator is responsible for the adherence to these laws and provisions.
2.4 Safety and responsibility
The following chapter lists all relevant security notices for the safe handling of the
product. The listed security notices must be followed for all operations on the product.
Observing the product documentation
The product documentation is part of the product and an important component in the
security concept. Its non-observance can result in serious injuries or even death.
➔ Read the product documentation and always follow all described procedures and
warning notices.
➔ Always keep the product documentation next to the product.
➔ Pass on the product documentation to all subsequent users.
Safety regulations
Safety and responsibility
DIB-R5 flexibleTx
19Operation Manual 90DIBR5flexibleTxOM02 - 1.2