User's Manual
Table Of Contents
- Table of contents
- 1 Notes on the document
- 2 Safety regulations
- 3 Product description
- 3.1 Characteristics of the DIB-R5
- 3.2 Components
- 3.3 Interfaces
- 3.4 Wiring diagrams
- 3.5 Redundancy options
- 3.6 Scope of delivery
- 4 Operation
- 4.1 Safety measures and prerequisites
- 4.2 Switching on the DIB-R5 flexibleTx
- 4.3 Function tests and operational monitoring
- 4.3.1 Work equipment for function tests
- 4.3.2 Connecting the service computer
- 4.3.3 Checking operating states
- 4.3.4 Checking the availability
- 4.3.5 Checking standby carriers ‒ optional
- 4.3.6 Function tests and GNSS operational monitoring
- 4.3.7 Function tests and PTP operational monitoring (optional)
- 4.3.8 Checking external antenna coupling systems
- 5 Service interruption
- 6 Recommissioning
- 7 Maintenance
- 8 Troubleshooting
- 9 Index
Figure 10: Connection panel (top view)
Legend: Connection panel (top view)
No. Component Description Connection
type
1 ALARM INPUT Alarm inputs/outputs for wiring
alarm contacts
Connector with
screw terminal
2 ALARM OUTPUT
3 SCN1 Connection to an IP transport net-
work or for connecting a switching
controller node (SCN).
With controller redundancy
(optional), both connections must
be connected to design the
ethernet connections of the
BSCUs redundantly.
RJ45
4 SCN2
5 MCB1 Connection for applications RJ45
6 MCB2
7 SW1 Connection of the service com-
puter (local)
RJ45
8 SW2 Connection of service computer
(local) ‒ optional for controller
redundancy
This connection is used only if
software downloads should be
performed purposefully only for
the redundant BSCU.
RJ45
Product description
Components > Connection and control panel
DIB-R5 flexibleTx
35Operation Manual 90DIBR5flexibleTxOM02 - 1.2