User's Manual
Table Of Contents
- Table of contents
- 1 Notes on the document
- 2 Safety regulations
- 3 Product description
- 3.1 Characteristics of the DIB-R5
- 3.2 Components
- 3.3 Interfaces
- 3.4 Wiring diagrams
- 3.5 Redundancy options
- 3.6 Scope of delivery
- 4 Operation
- 4.1 Safety measures and prerequisites
- 4.2 Switching on the DIB-R5 flexibleTx
- 4.3 Function tests and operational monitoring
- 4.3.1 Work equipment for function tests
- 4.3.2 Connecting the service computer
- 4.3.3 Checking operating states
- 4.3.4 Checking the availability
- 4.3.5 Checking standby carriers ‒ optional
- 4.3.6 Function tests and GNSS operational monitoring
- 4.3.7 Function tests and PTP operational monitoring (optional)
- 4.3.8 Checking external antenna coupling systems
- 5 Service interruption
- 6 Recommissioning
- 7 Maintenance
- 8 Troubleshooting
- 9 Index
Figure 28: Internal wiring with four CHUs and external antenna coupling system
3.4.2 Antenna configurations
The following table provides an overview of the antenna configurations that are described
in the following chapters.
Overview of antenna configurations
Antenna configuration Described in
Ä
Antenna configuration with four CHUs
and external antenna coupling system
Ä
Chapter 3.4.2.1 “Antenna configuration
with four CHUs and external antenna cou-
pling system” on page 59
3.4.2.1 Antenna configuration with four CHUs and external antenna coupling system
The following figure shows the antenna configuration with four CHUs and external
antenna coupling system.
Product description
Wiring diagrams > Antenna configurations
DIB-R5 flexibleTx
57Operation Manual 90DIBR5flexibleTxOM02 - 1.2