User's Manual

Table Of Contents
Work steps Described in
Ä
Checking standby carriers
optional
Ä
Chapter 4.3.5
“Checking standby car-
riers
optional”
on page 73
Ä
Function tests and GNSS operational monitoring
Ä
Chapter 4.3.6 “Func-
tion tests and GNSS
operational monitoring”
on page 74
Ä
Function tests and PTP operational monitoring (optional)
Ä
Chapter 4.3.7 “Func-
tion tests and PTP
operational monitoring
(optional)” on page 76
Ä
Checking external antenna coupling systems
Ä
Chapter 4.3.8
“Checking external
antenna coupling sys-
tems” on page 77
4.3.1 Work equipment for function tests
The following table provides an overview of the work equipment for function tests and
operational monitoring.
Overview of work equipment (function tests and operational monitoring)
Work step Work equipment
Checking operating states via the NMC-511
FaultManager
n configured NMC computer
n straight through ethernet cable
n NMC-511 FaultManager
Checking the reachability of network ele-
ments
n configured NMC or service computer
n straight through ethernet cable
Checking standby carriers NMC-511 FaultManager
Function tests and GNSS operational moni-
toring
n configured NMC computer
n NMC-511 FaultManager
n GNSS antenna(s)
n GNSS antenna cable
Function tests and PTP operational moni-
toring
n configured NMC or service computer
n Network tool (e.g. Wireshark)
4.3.2 Connecting the service computer
The service computer may be any computer that meets the system requirements.
Operation
Function tests and operational monitoring > Connecting the service computer
DIB-R5 flexibleTx
66 Operation Manual 90DIBR5flexibleTxOM02 - 1.2