QUICK REFERENCE GUIDE HP78X Digital Portable Radio is the trademark or registered trademark of Hytera Communications Corporation Limited. 2020 Hytera Communications Corporation Limited. All Rights Reserved. Address: Hytera Tower, Hi‐Tech Industrial Park North, 9108# Beihuan Road,Nanshan District, Shenzhen, 518057 China Postcode: 518057 http:// www.hytera.
Product Overview No. Product Layout Part Name No. 8 P1/Answer Key 20 9 10 11 12 Numeric Keypad Speaker LED Indicator Antenna 21 22 23 / Part Name Accessory Connector Belt Clip Battery Charging Piece / Programmable Keys For enhanced convenience, you can request your dealer to program the following keys as shortcuts to radio features: TK, SK1, SK2, P1/Answer key, P2/End key, and Navigation key. For details, consult your dealer. Basic Operations Charging the Battery No.
●● Manual Lock or Unlock » Press the preprogrammed Keypad Lock key. » On the home screen, press the OK/Menu key, and then press . Using the Keypad You can use the keypad to enter contact aliases and IDs, or edit messages. ●● To switch the input method between alphabetic mode . and numeric mode, press in alphabetic ●● To enter special characters, press mode. ●● To enter a space, press in alphabetic mode.
Icon Radio Status Indicator The radio operates in profile 2. The radio is operating in emergency mode. There is/are missed call(s). Flashes orange rapidly There is/are new/unread message(s). Radio Status ●● Conventional mode: The radio is operating in emergency mode. ●● Trunking mode: The radio is establishing a Full Off Air Call Set-up (FOACSU) private call. (This indication is applicable only to the called radio.) The inbox is full. For details on other LCD icons, refer to the User Manual.
FCC/ISEDC Statement This device complies with part 15 of the FCC/ISEDC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la partie 15 des règles FCC/ISEDC.
RF Exposure Compliance and Control Guidelines and Operating Instructions To control your exposure and ensure compliance with the occupational/controlled environmental exposure limits, Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure guidelines. Contact your local dealer for the optional accessories of the product. always adhere to the following procedures. Guidelines: Do not remove the RF Exposure Label from the device.
SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.
