User's Manual
Table Of Contents
- Preface
- Documentation Information
- 1. Before Use
- 2. Basic Operations
- 3. PoC Service
- 4. Network and Data Sharing
- 4.1 Mobile Network
- 4.2 WLAN
- To connect the radio to the WLAN network, do as follows:
- 1. Press the OK/Menu key to open .
- 2. Press the OK/Menu key to enter the WLAN interface.
- 3. Press the OK/Menu key to enable WLAN.
- 4. Press the Navigation key down to select an available network from the WLAN list.
- 5. Press the OK/Menu key.
- 6. (Optional) If a password is required, enter the password, press the Navigation key down to select Connect, and then press the OK/Menu key.
- 4.3 BT
- 4.4 Hotspot
- 4.5 Airplane Mode
- 4.6 USB
- 5. Settings
- 5.1 Radio Settings
- 5.1.1 Display
- Adjusting the Brightness
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Display, and then press the OK/Menu key.
- 3. Press the OK/Menu key.
- 4. Press the Navigation key left or right.
- Setting the Sleep Time
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Display, and then press the OK/Menu key.
- 3. Press the Navigation key down to select Sleep, and then press the OK/Menu key.
- 4. Press the Navigation key up and down to select the sleep time, and then press the OK/Menu key.
- Adjusting the Font Size
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Display, and then press the OK/Menu key.
- 3. Press the Navigation key down to select Font size, and then press the OK/Menu key.
- 4. Press the Navigation key to select Default or Large, and then press the OK/Menu key.
- 5.1.2 Sound
- Setting the Profile
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Sound, and then press the OK/Menu key.
- 3. Press the OK/Menu key.
- 4. Press the Navigation key to select Silent or Ringtone, and then press the OK/Menu key.
- Adjusting the Media Volume
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Sound, and then press the OK/Menu key.
- 3. Press the Navigation key down to select Volumes, and then press the Navigation key left or right.
- 5.1.3 Storage
- Viewing the Storage Usage
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Storage, and then press the OK/Menu key.
- Freeing up the Storage Space
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Storage, and then press the OK/Menu key.
- 3. Press the OK/Menu key to view the internal storage.
- 4. Press the Navigation key down to select Cached data, and then press the OK/Menu key.
- The Clear cached data? dialog box appears.
- 5. Press the OK/Menu key.
- 5.1.4 Battery
- Viewing the Battery Power
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Battery, and then press the OK/Menu key.
- The remaining battery power is shown.
- 3. Press the Navigation key down to select Battery usage, and then press the OK/Menu key.
- The power usage of applications is shown.
- Enabling the Battery Saver Mode
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Battery, and then press the OK/Menu key.
- 3. Do either of the following:
- 5.1.1 Display
- 5.2 System Settings
- 5.2.1 Location
- Setting the Location Mode
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Location, and then press the OK/Menu key.
- 3. Press the OK/Menu key to enable Location.
- 4. Press the Navigation key down to select Mode, and then press the OK/Menu key.
- 5. Select one of the following location modes:
- Setting the Scanning Mode
- 1. Enable Location. For details, see Setting the Location Mode.
- 2. Press the Navigation key down to select Mode, and then press the OK/Menu key.
- 3. Select whether to enable the following scanning modes:
- 5.2.2 Languages
- 5.2.3 Factory Data Reset
- 5.2.4 Date and Time
- Setting the Date, Time, and Time Zone
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key to select Date & time, and then press the OK/Menu key.
- 3. Press the Navigation key to select Automatic date & time or Automatic time zone, and then do one of the following:
- Setting the Time Format
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Date & time, and then press the OK/Menu key.
- 3. Press the Navigation key down to select Use 24-hour format, and then press the OK/Menu key to enable the feature.
- The radio uses the 24-hour format. Otherwise, the radio uses the 12-hour format.
- 5.2.5 Upgrade
- 5.2.1 Location
- 5.1 Radio Settings
- Enable the radio to update the date, time, and time zone automatically
- Press the OK/Menu key to enable the option.
- Set the date, time, and time zone manually
- 6. Camera
- 7. Gallery
- 7.1 Photos
- 7.2 Videos
- 7.2.1 Playing a Video
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Videos, and then press the OK/Menu key.
- 3. Press the Navigation key to select the video, and then press the OK/Menu key to open the video.
- 4. Press the OK/Menu key again to play the video.
- 5. (Optional) Press the Navigation key left or right to rewind or fast-forward the radio.
- 7.2.2 Managing a Video
- 7.2.1 Playing a Video
- 8. Sound Recorder
- 9. Applications
- 10. Troubleshooting
- 11. Care and Cleaning
- 12. Optional Accessories
- 13. Abbreviation
23
Setting the Time Format
You can set the time format to 12-hour or 24-hour.
1. Press the OK/Menu key to open
.
2. Press the Navigation key down to select Date & time, and then press the OK/Menu key.
3. Press the Navigation key down to select Use 24-hour format, and then press the OK/Menu key to
enable the feature.
The radio uses the 24-hour format. Otherwise, the radio uses the 12-hour format.