User's Manual
Table Of Contents
- Preface
- Documentation Information
- 1. Before Use
- 2. Basic Operations
- 3. PoC Service
- 4. Network and Data Sharing
- 4.1 Mobile Network
- 4.2 WLAN
- To connect the radio to the WLAN network, do as follows:
- 1. Press the OK/Menu key to open .
- 2. Press the OK/Menu key to enter the WLAN interface.
- 3. Press the OK/Menu key to enable WLAN.
- 4. Press the Navigation key down to select an available network from the WLAN list.
- 5. Press the OK/Menu key.
- 6. (Optional) If a password is required, enter the password, press the Navigation key down to select Connect, and then press the OK/Menu key.
- 4.3 BT
- 4.4 Hotspot
- 4.5 Airplane Mode
- 4.6 USB
- 5. Settings
- 5.1 Radio Settings
- 5.1.1 Display
- Adjusting the Brightness
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Display, and then press the OK/Menu key.
- 3. Press the OK/Menu key.
- 4. Press the Navigation key left or right.
- Setting the Sleep Time
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Display, and then press the OK/Menu key.
- 3. Press the Navigation key down to select Sleep, and then press the OK/Menu key.
- 4. Press the Navigation key up and down to select the sleep time, and then press the OK/Menu key.
- Adjusting the Font Size
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Display, and then press the OK/Menu key.
- 3. Press the Navigation key down to select Font size, and then press the OK/Menu key.
- 4. Press the Navigation key to select Default or Large, and then press the OK/Menu key.
- 5.1.2 Sound
- Setting the Profile
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Sound, and then press the OK/Menu key.
- 3. Press the OK/Menu key.
- 4. Press the Navigation key to select Silent or Ringtone, and then press the OK/Menu key.
- Adjusting the Media Volume
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Sound, and then press the OK/Menu key.
- 3. Press the Navigation key down to select Volumes, and then press the Navigation key left or right.
- 5.1.3 Storage
- Viewing the Storage Usage
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Storage, and then press the OK/Menu key.
- Freeing up the Storage Space
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Storage, and then press the OK/Menu key.
- 3. Press the OK/Menu key to view the internal storage.
- 4. Press the Navigation key down to select Cached data, and then press the OK/Menu key.
- The Clear cached data? dialog box appears.
- 5. Press the OK/Menu key.
- 5.1.4 Battery
- Viewing the Battery Power
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Battery, and then press the OK/Menu key.
- The remaining battery power is shown.
- 3. Press the Navigation key down to select Battery usage, and then press the OK/Menu key.
- The power usage of applications is shown.
- Enabling the Battery Saver Mode
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Battery, and then press the OK/Menu key.
- 3. Do either of the following:
- 5.1.1 Display
- 5.2 System Settings
- 5.2.1 Location
- Setting the Location Mode
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Location, and then press the OK/Menu key.
- 3. Press the OK/Menu key to enable Location.
- 4. Press the Navigation key down to select Mode, and then press the OK/Menu key.
- 5. Select one of the following location modes:
- Setting the Scanning Mode
- 1. Enable Location. For details, see Setting the Location Mode.
- 2. Press the Navigation key down to select Mode, and then press the OK/Menu key.
- 3. Select whether to enable the following scanning modes:
- 5.2.2 Languages
- 5.2.3 Factory Data Reset
- 5.2.4 Date and Time
- Setting the Date, Time, and Time Zone
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key to select Date & time, and then press the OK/Menu key.
- 3. Press the Navigation key to select Automatic date & time or Automatic time zone, and then do one of the following:
- Setting the Time Format
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Date & time, and then press the OK/Menu key.
- 3. Press the Navigation key down to select Use 24-hour format, and then press the OK/Menu key to enable the feature.
- The radio uses the 24-hour format. Otherwise, the radio uses the 12-hour format.
- 5.2.5 Upgrade
- 5.2.1 Location
- 5.1 Radio Settings
- Enable the radio to update the date, time, and time zone automatically
- Press the OK/Menu key to enable the option.
- Set the date, time, and time zone manually
- 6. Camera
- 7. Gallery
- 7.1 Photos
- 7.2 Videos
- 7.2.1 Playing a Video
- 1. Press the OK/Menu key to open .
- 2. Press the Navigation key down to select Videos, and then press the OK/Menu key.
- 3. Press the Navigation key to select the video, and then press the OK/Menu key to open the video.
- 4. Press the OK/Menu key again to play the video.
- 5. (Optional) Press the Navigation key left or right to rewind or fast-forward the radio.
- 7.2.2 Managing a Video
- 7.2.1 Playing a Video
- 8. Sound Recorder
- 9. Applications
- 10. Troubleshooting
- 11. Care and Cleaning
- 12. Optional Accessories
- 13. Abbreviation
24
5.2.5 Upgrade
Only use the official software to upgrade the system, therefore preventing equipment
failure, data loss, or damage to the system security.
Be sure to back up your data before upgrade.
Ensure that the battery power is more than 30% before upgrading.
When an update is available,
you can upgrade the system.
The radio automatically downloads the upgrade package, and then starts to upgrade.
After you receive a system upgrade notification, the radio automatically downloads the upgrade
package, and then starts to upgrade.