Installation Guide

INSTALLATION
1. Inspect wall surfaces to ensure they are
structurally sound and free of dirt, grease, and
markings.
2. Clean off any debris and markings and
ensure surface is dry before beginning
installation process.
3. Carefully inspect all individual wallcovering
rolls (rolls are shipped separately in individual
boxes and we will not be responsible for
damage after goods are cut).
4. Material is designed to be dry hung (do not
use a pasting machine).
5. Apply a premixed, heavy-duty vinyl
wallcovering adhesive directly to the wall and
allow it to dry overnight. (IMPORTANT:
Adhesive is ready mixed and should not be
diluted. DO NOT APPLY PASTE TO THE BACK
OF THE WALLCOVERING.
6. Once the first coat of wallcovering adhesive is
completely dry, apply a second coat of
undiluted adhesive to the wall and allow the
adhesive to dry until it has a slight tack-ability
to the touch.
7. Wallcovering should be hung straight up
without alternating strips (All seams should be
vertical, nap going the same way, and at least
six inches away from the inside or outside of
corners). For best results, apply full widths of
material wherever possible. Headers and
doors may cause shading.
8. Begin hanging by cutting the first wallcovering
strip to the desired length, while leaving an
inch of material on the top and bottom for
proper trimming (a straight line will have to be
cut on the top and bottom, as the material is
not factory trimmed). All top and bottom edges
must be butt joined.
9. Continue to install a second and third strip
following the same process as with the first
strip. Inspect the three strips for color,
uniformity, and proper application. Continue
installation, stopping to inspect for product
correctness and proper application ever three
strips. If a problem is detected after any three
strips are applied, STOP WORK IMMEDIATELY
and call customer service. (Shading is normal
due to the lustrous needle-punch pile and
should not be considered a defect).
Antimicrobial.
Fights odors,
mold and mildew.
Recycled and Recyclable.
High-quality fiber made
from 100% post-consumer
recycled plastic bottles.