User's Manual

The DUO-Aria was designed for everyday use with its aluminum casing and its solid-
state design provides for skip-free audio playback under most active situations. Please
bear in mind the following information when using the DUO-Aria.
Unit may be damaged if struck or crushed.
Use a carrying case when carrying and using your DUO-Aria.
Keep out of direct sunlight.
Keep away from dust and dirt.
Clean with a dry, soft cloth.
Store in a cool dry place.
Do not store your DUO-Aria around a television set due to the magnetic field
interference that may result with the TV.
Do not press the DUO-Aria player body. The excessive pressure on the body could
cause the damage of inside mechanism sensitive to the external damage.
Do not touch the belt. It may cause bad effect on the tape simulation function.
Do not leave the DUO-Aria player inside a car in summer under direct sunlight.
HANDLING AND STORING INSTRUCTIONS
20
AUDIBLE.COM CONTENT OPERATION
19
2. Cassette Deck DUO-Aria Player Operation
Desired Operation
Buttons Function When Pressed
Skip to next/previous Press and hold Skips a track.
track F.F./Rew > 1 sec
then resume Play
Skip to next/previous Press and hold Skips a section within a
section F.F./Rew 1-2 sec track.
then resume Play
Search forward Press and hold Searches within a through a
/backward F.F./Rew > 3 sec section section at 2X Speed
then resume Play for as long as F.F./Rew button
is depressed.
Note :
The above Power Save operation instructions also apply when playing back
Audible.com content
.
3. Bookmark Function
Depending upon the content being listened to, there may be a need to stop
the unit and resume play at the point where the player was stopped. T
o
accomplish this with the DUO-Aria there are three options:
1) While listening to audio, press the Stop button once quickly to enter
Pause/Power Save mode with the unit still on. To resume play at the
exact point the audio was stopped, press the Play button once.
2)
While listening to audio, press the Stop button for more than 3 seconds
to completely power down the unit. To resume play at the exact point
the audio was stopped, briefly slide the Power Switch to the “Off”
position and then back to the “On” position, then press the Play button.
3) Slide the Power Switch to the “Off” position. To resume play at the
exact point the audio was stopped, slide the Power Switch to the “On”
position and press the Play button.