User's Manual

24
If a USB driver to control DUO-Aria already exists in PC, there is no need to install
a new driver.
Insert Software CD into CD-ROM Drive (Do not execute the installation
program.)
Connect the DUO-Aria Player to PC with USB cable.
(If there is no USB driver to communicate between the DUO-Aria and the PC,
the "New Hardware Wizard" will appear on the screen.)
Proceed the installation following the on-screen instructions.
When the location of the drive is asked, select the folder of your CD-ROM.
(When the installation finishes once, The New Hardware Wizard will appear on
screen again.)
Follow the on-screen instructions to complete the installation of the USB driver.
IMPORTANT NOTE :
When connecting the cable with DUO-Aria player, ensure the correct orientation of
the connector end, and do not force the connector. Improper connection with the
USB cable can cause damage to the computer and/or the DUO-Aria player.
SETTING USB DRIVE
The DUO-Aria player will not download digital files from the PC.
Verify that the unit is switched "On".
Check to see if the battery is fully charged.
Check the cable connection to the USB port.
Verify that the battery has been inserted correctly.
The DUO-Aria player will not play.
Verify that the unit is switched "On".
Verify that the battery has been inserted correctly.
Check to see if the battery is fully charged.
Verify that the player is inserted correctly into the tape deck.
If used in a cassette deck, check tape player direction (DUO-Aria will only play
properly in one tape direction)
Verify that the MMC card is inserted properly, if applicable
The DUO-Aria sound is not clear in a cassette deck, or sound comes only from the
left or right speakers.
Verify that the unit is on.
Adjust the tape head control position for optimal alignment with the tape deck head.
Reposition the DUO-Aria with the front side down and press auto-reverse to
play bottom side.
The DUO-Aria Manager does NOT recognize the hardware connection.
Verify that the unit is switched "On".
V
erify that the battery has been inserted correctly.
Check to see if the battery is fully charged.
Check the cable connection to the USB port.
You may need to re-install the software.
The DUO-Aria player does not respond to cassette deck controls (Play, FF and/or
Rew) when first used in a cassette deck.
Rotate the DUO-Aria cassette wheels manually using a finger in a clockwise and
counter clockwise motion 4~5 times. Re-insert DUO-Aria player into the
cassette deck.
Please visit the Digisette website at www
.digisette.com for the latest updates and
software upgrades for the DUO-Aria.
TROUBLE SHOOTING PROBLEMS
23