User's Manual

2322
Voice Recoding
1. Voice recording starts when the REC/A-B button is
pushed for 2 seconds or longer.
2. When you push the STOP button( ), the recording
process stops and a new voice file is created.
The recorded file is stored in ADPCM file format and will have an extension of ADP.
Adjusting the volume level while recording would not affect the recording volume. The
recording volume is maintained at a constant level.
Voice recording stops automatically when memory is full ( ), and the file
recorded up to the stop point will be stored.
The sensitivity may vary depending on the distance from the sound source.
Be cautious that separating batteries while recording may cause malfunction.
The file created after batteries have been separated while recoding cannot be played.
Searching a Music/Voice File
1. Searching a certain part in the file while playing.
A certain part can be searched by pushing and holding
the FF/REW buttons while playing.
Releasing the buttons will start playing from the searched
position.
2. Searching a certain file during while playing.
The next/previous track is played if the FF/REW buttons
is pushed shortly while playing.
If the REW button is pushed within 5 seconds after
a track started to play, it will move to the previous
track and start to play. If the REW button is pushed
5 seconds or longer after a track started to play,
it will move to the beginning of the current track and
start to play.
3. Searching a certain file in STOP mode
In STOP mode, you can move to previous/next tracks
and search a certain file, by pushing the FF/REW
buttons shortly.
Note
VBR (Variable Bit Rate) file: MP3 file, which has different compression rates
depending on the progress of music.
In case of VBR files, pushing the REW button within 5 seconds the track
started to play, may not move it to the previous track and play.