User's Manual

3534
Setting USER EQ
1) Select USER EQ on MENU
2) Select User EQ from User_EQ1 and User_EQ2
3) You can control when the display shows 5 BARs (supports 5 Bands)
4) You can select Band using the FF/REW buttons.
5) You can adjust the value of selected Band using the VOL+/VOL-
buttons.
6) The set values can be stored by pushing the MENU/HOLD button
shortly and long.
But if you push the REC/A-B or STOP button, the set values will not be
stored and it will be released from the previous selected item or MENU.
Setting USER EQ
Player supports two USER EQs (USER EQ_1 USER EQ_2)
Setting SRS
What is SRS?
SRS is one of the most representative 3D sound technologies, that was developed by
SRS labs.
Setting SRS
1. Select WOW using FF/REW buttons after pushing the MENU/HOLD button shortly in play
or stop mode. Push the MENU/HOLD button shortly again.
2. Select SRS by pushing the MENU/HOLD button.
Then set the Level using the FF/REW buttons. (total of 10 levels)
What is TruBass?
It delivers the same effect as having larger speakers, by improving the response of bass
sound and low frequencies.
Setting TruBass
1. Select WOW using FF/REW buttons after pushing the MENU/HOLD button shortly in play mode.
Push the MENU/HOLD button shortly again.
2. Select TruBass by pushing the
MENU/HOLD button. Then set the Level using FF/REW button.
(total of 10 levels)
What is WOW?
It consists of FOCUS function that enables the detection of even the very small sound in addition
to SRS and Trubass functionalities. You can enjoy the 3D sound and rich bass altogether.