User's Manual

Complete the following steps to get started with your Ultrasm
1. Make sure the battery is fully charged and insert it into your
Ultrasm.
2. Connect the USB cable to the Ultrasm and the PC USB port.
3. Using the software, download music to your computer from the
Internet or convert it from an existing CD.
Then, download audio files to your Ultrasm.
4. Disconnect the Ultrasm from the USB cable and power on Ultrasm
by pressing the "play button" for 2 seconds.
5. Press play button again. Now you can enjoy digital audio from your
Ultrasm with earphone.
Ultrasm additional Function.
1) If the player senses it is not used for 5minutes, it will automatically
enter Power Save mode.
2) The Ultrasm will play first song when the power is on from power
saving mode.
The Ultrasm will resume play from the exact point in the audio
track that was playing when the power is on from power off.
Caution
- Connect earphone jack into Ultrasm completely.
- If you can't listen music when power is on after separating USB cable,
please press Play again after uncovering the battery pack for a while
and cover that.
It makes DSP booted again and it plays properly.
- Please don't use Ultrasm with another USB device such as digital
camera and scanner to avoid software's communication error.
- Please check our web-site to see more information.(http://www.m-
any.com)
Getting started with Ultrasm
20
Ultrasm LCD Display
a. Title of a song
b. File type
c. Current mode (Play
or Pause )
d. EQ type
e. Playing time
f. Volume level
g. Track No.
h. Hold status
I. Normal Mode : play all titles and stop
( ) Repeat 1: repeat play of current title
( ) Repeat All : repeat play of all titles in order
( blinking) Random : one time play of all titles in random
( blinking) Random All : repeat play of all titles in random
j. Voice & Music recoding status
k. Battery status
abcde fg
hi j k
21