User's Manual

Select the satellite you want with or .

Press to move to TP section and select the TP you want with or .

When the satellite and the TP are selected, you can check the reception

status of the satellite signal. If the reception signal status is bad, adjust

antenna to get the following result.

Select ‘Antenna Setup’ with or and press .

Screen

Motor/Goto 0

Move/Save

Set Limit

My longitude

My latitude

Skew Hor.

Antenna Setup

-Main,

-Prev.

Horizontal-18V

28,123 MSPS

Stop

Disable

000.0

00.0

+45

Tuner

FEC

5/6

----

Level Qual.

5% 10%

USER1

[1] 4,000 GHz

Level Indicating selected satellite signal strength level

Quality Indicating signal to noise ratio

You need to position your antenna correctly for reception of the best signal.

Press MENU key.

Select ‘Installation’ with or , and press .

Screen

Antenna Setup

Installation

-Next, -Prev.

LNB Configuration

Antenna Setup

Satellite Scan

TP Edit/Scan

Factory Set